4066M

Compact Utility Tractor

  • Turbocharged diesel engine
  • PowrReverser™ or eHydrostatic Transmission options
  • Standard 4-wheel-drive
  • Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

Apply For Financing

Buy Now

View Product Brochure

*Must pre-order a new John Deere 1 - 4 Series tractor in order to be eligible for the Free pickup and delivery for life offer. Must be within 30 miles of a Legacy Equipment location. Offer is valid on the timespan the original customer who preordered the John Deere Tractor owns it. Non-transferable. Some restrictions may apply. See Legacy Equipment for complete details.



Features



4R Tractor4R Tractor
#

The bold styling of the 4M and 4R Tractors provide an attractive and functional appearance similar to that of the larger agricultural tractors. Benefits of this styling include:

  • Easy tractor family identification
  • Updated fixed grille and side panel hood design allows for optimum sealing of the cooling compartment
    • Front grille slides up to an integrated maintenance position for easy battery access
  • Easily removable cowl, allowing for serviceability access
  • Wraparound-style halogen headlights
    • Premium integrated automotive style headlight bezels
  • Bold graphics
  • Aggressively sloped hood design, giving a softer, smoother look and providing improved visibility
  • Hybrid exhaust in base on cab tractors for clear operator visibility and safety
    • At low speed and when tractor is in a filter cleaning process, exhaust will be routed through vertical exhaust outlet. In all other cases, the exhaust will be routed through the downward exhaust outlet.
    • Side exhaust in base on open operator station tractors and ensures minimal heat impact to operator

The result gives the tractor a distinctive appearance and feel.

NOTE:  If the tractor is equipped with an optional field-installed vertical exhaust, exhaust pipe must be removed before opening and closing the hood of the tractor.

Powerful Yanmar enginePowerful Yanmar engine

The Yanmar diesel engine has a high-torque reserve that provides plenty of power under heavy load.

This 4-cylinder engine features lower levels of exhaust emissions and reduced noise levels. It meets EPA Final Tier 4 (FT4) emission standards.

Model

Number of
cylinders

Engine
displacement

Aspiration

Rated
rpm

Gross engine
hp*

Gross engine ps*

PTO hp

 4044M/R

4

2.2 L

Natural

 2600

42.5

43.1

32.5

4052M/R

4

2.1 L

Turbocharged

 2600

50.8

51.5

39.9

4066M/R

4

2.1 L

Turbocharged

2600

65.0

65.9

52.0

*Engine hp (kW), gross SAE J1995: 43.1 (31.7) at 2600 rpm, PS
Displacement, cu in. (L):134.25 (2.2)
*Engine hp (kW), gross SAE J1995: 51.5 (37.9) at 2600 rpm, PS
Displacement, cu in. (L):128.15 (2.1)
*Engine hp (kW), gross SAE J1995: 65.9 (48.5) at 2600 rpm, PS
Displacement, cu in. (L):128.15 (2.1)

The engine uses the latest technologies to optimize fuel economy, improve control and accuracy, and reduce environmental impact.

The common rail system (CRS) optimizes fuel economy and reduces operating costs*. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and lower cost of operation.

The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.

The new engine comes with an after treatment system. The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated. In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC).

After many hours of use, the exhaust filter may require an ash removal service.

NOTE: *As compared to engines not using CRS technology.

DPF cleaning

Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:

  • A prescribed time-based estimation of needed filter cleaning
  • DOC/DPF pressure sensors
  • A particulate matter buildup estimation based on load conditions

Once one of the three conditions has been met, filter cleaning will occur.

There are three different types of filter cleaning processes:

  • Passive filter cleaning
  • Active filter cleaning
  • Parked filter cleaning

Passive filter cleaning

Passive filter cleaning occurs naturally when the engine is generating enough heat to oxidize particulate matter. This automatic process occurs continuously during normal operating conditions. No tractor icons or symbols appear on the display during passive filter cleaning.

NOTE: Passive filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

Active filter cleaning

If conditions (temperature, load, or speed) for passive filter cleaning cannot be achieved, then PM is removed using active filter cleaner.

To achieve the required conditions, exhaust temperature management (ETM) manages the initiation and duration of active filter cleaning. ETM can adjust numerous engine parameters and/or inject a small quantity of fuel into the exhaust stream for a short duration. The fuel turns to vapor and chemically reacts with the catalysts in the DOC to create heat to oxidize PM.

It is important to note that at no time is the fuel in the DOC/DPF ignited, and there is no flame within the DOC/DPF.

Like passive filter cleaning, active filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

Parked filter cleaning

In some instances where passive and active filter cleaning have not fully cleaned the PM from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process.

The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operator’s manual for more details.

This system constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.

NOTE:  Number of hours since last regeneration and soot level percentage viewable on LCD display.

Key features of the engine are:

  • Lower rated speed for 540 rpm power take-off (PTO) operation means better fuel economy, less noise and vibration, and longer overall engine life 
  • Cast-in-block cylinder design for good cooling and long life
  • Hydraulic lifters are quieter and require no adjustment
  • Heavy-duty crankshaft provides more bearing surface area for added durability
  • CRS optimizes fuel economy, lowering the cost of operation
  • ECU provides optimum control and accuracy
  • Direct fuel injection
    • Improves starting
    • Injects fuel directly on top of pistons for more efficient combustion
    • Develops more horsepower per gallon of fuel
    • Glow plugs (cold starting aid)
  • Engine oil cooler, cools engine oil for longer engine life
  • Key start and shutoff eliminates fuel shutoff knob
    • Electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
    • Sealed radiator compartment keeps trash and debris on outside of hood
Dry-type air cleanerDry-type air cleaner
#
  • Dry-type air cleaner with safety element and electronic air service indicator
    • Electronic air restriction indicator alerts operator when air filter servicing is required
    • Dual-element design for added engine protection
    • Easy to service
  • Standard side exhaust
  • Discharges fumes away from the operator, reducing engine noise
  • Improves operator visibility when using a loader or front implement
  • Optional vertical exhaust

Yanmar is a trademark of Yanmar Company Limited.

PowrReverser transmission allows for clutchless direction changes
PowrReverser transmission leverPowrReverser transmission lever

The 12/12 PowrReverser transmission is available on the 4M and 4R Tractors.

The PowrReverser transmission offers a hydraulically shifted forward-to-reverse transmission. This allows for clutchless shuttle shifting between forward and reverse with one lever for quick and easy direction change.

  • PowrReverser transmission does not require the operator to use the clutch to shift between forward and reverse

The PowrReverser transmission features a hydraulically actuated wet clutch. Two multi-disk clutch packs (one forward and one reverse) are hydraulically engaged when the directional (reverser) lever is placed in either the forward or reverse position.

Each clutch pack consists of three large, 5-in. diameter clutch disks that operate in oil and are oil-cooled, allowing excellent heat dissipation and extended clutch life.

Forward/reverse clutchesForward/reverse clutches
  • Clutch A is used for the forward operation of the tractor
  • Clutch B is used for the reverse operation of the tractor

 

Key features of the PowrReverser transmission:

  • 12 forward/12 reverse (12F/12R) speeds
  • Reverser lever, located on the left side of the instrument console, allows the operator to make direction changes without clutching
    • Fast shuttle shift for improved loader operation
  • Dual-cone synchronizers allow for synchronized shifts between gears for on-the-go shifting with the use of the clutch
  • Dual-cone synchronizers permit on-the-go, low-effort shifting between gears
  • Helical-cut gears for quiet operation
Helical-cut gearsHelical-cut gears
#
  • Well-spaced speeds for turf, loader, and transport work
  • Neutral start switch prevents tractor from starting when transmission (main range) is not in neutral
  • Dual wet-disk clutches provide long clutch life
  • Shifts between ranges are not synchronized
  • PowrReverser transmission models have both hand and foot throttle controls
  • Especially handy when using a loader

The tractor is available with a three-range electronic hydrostatic (eHydro) transmission.

  • Fluid under pressure transmits engine power to the drive wheels using a pump and motor
  • Functions both as a clutch and transmission
  • Provides high torque for startup
  • Reduces powertrain shock loads

Danfoss® company supplies both the pump and motor. This ensures that the components are matched to each other, providing maximum efficiency.

 

The electronic hydrostatic transmission is ideally suited for jobs where productivity is a must, such as loader or mower applications.

Twin Touch™ foot controls allow the operator to select both directions of travel and speed with a touch of the toe.

Key features of the eHydro transmission:

  • Infinitely variable ground speeds, in each range, allow the operator to match the speed of the tractor to the job.
  • No clutching for fast and easy direction changes
  • Twin Touch foot pedals for quick and easy forward/reverse operation
  • Cruise control is optional equipment
    • Cruise control switch is located on the right-hand console for easy access
    • Cruise control is electronically engaged and disengaged, which allows for precise setting of speed
Danfoss eHydro transmissionDanfoss eHydro transmission
#

Danfoss eHydro transmission is used for reliable operation. Durability features include:

  • Large forged trunnion shaft with larger support bearings that reduce vibration and noise.
  • Center section made from ductile iron (much stronger than grey iron used in many competitive transmissions).
  • Transmission oil cooler cools transmission oil for longer transmission life.

Safety features of the eHydro transmission include:

  • The tractor will start with one or both foot pedals depressed, but it will not move until both pedals first return to neutral
  • Operator presence - the tractor will come to a stop if the operator leaves the seat but will not shut off unless the power take-off (PTO) is also running
Key John Deere advantage
Twin Touch foot controlsTwin Touch foot controls
#

John Deere's Twin Touch foot controls offer several key advantages over competitive hydro model tractors.

  • Some competitive hydrostatic tractors use a treadle pedal (toe-heel) design foot control for operation of the hydro 
    • Requires the operator to use both toe and heel to change direction, resulting in increased operator fatigue
Optional cruise control
Optional cruise control on 4M TractorsOptional cruise control on 4M Tractors
#

 A true-speed cruise control is optional equipment on 4M Tractors with eHydro transmission. Cruise control is electronically engaged and disengaged and is located on the operator console to the right of the operator.

  • Maintains desired forward speed without pressure on the foot pedal
  • Cruise control is set by engaging the switch when the desired speed is reached
  • A speed sensor also allows the tractor to maintain preset speed driving up and down hills
  • To disengage the cruise control, either:
    • Apply pressure to the turn brakes opposite the eHydro pedals
    • Disengage cruise control switch
    • Briefly depress the reverse control pedal
LoadMatch™ power management system

LoadMatch is a standard feature on the 4M Series Tractors.

 

If torque requirements increase significantly, the transmission will reduce the tractor's drive speed to compensate for the increased load on the transmission, maximizing torque to drive wheels and minimizing stalls.

 

Controls automatically adjust LoadMatch compensation depending on the tractor’s application. PTO applications require less engine speed fluctuation, therefore adjusting the amount of droop depending on PTO speed. This adjustment increases efficiency and optimizes engine speed and torque output based on tractor application.

 

While typically left on, LoadMatch can be turned off through the center console display.

MotionMatch™ system

MotionMatch, standard on the 4M Series Tractors, is adjustable through the center console display. It offers variable adjustments to either lengthen or shorten the rollout when the HST pedal is depressed or released. 

 

Serial number break information

All model year 2016 and newer tractors with serial numbers after those listed below are equipped with LoadMatch and MotionMatch features from the factory

  • 4044M: 1LV4044MCGG100594
  • 4052M: 1LV4052MVGG100273
  • 4066M: 1LV4066MHGG100181

 

For model year 2016 tractors with serial numbers before those listed above and previous model year tractors, these features are available with a machine software update.

 

Danfoss is a trademark of Danfoss Incorporated. 

Addition of optional center console toolbox
Easy entry and exit from the operator's stationEasy entry and exit from the operator's station
#

The operator's station is designed for easy entry and exit from the tractor.

Conveniently placed brake pedals, as well as repositioned operator controls, provide for a clean and flat platform design giving the operator plenty of legroom.

  • Hood and fenders are made from impact-resistant polymer material designed to eliminate the possibility of rusting and to resist dents that can occur with metal hoods or fenders.
  • The hood is painted to an automotive-like finish, providing a high-luster appearance with excellent resilience and resistance to fading from sunlight.
Comfortable and convenient designComfortable and convenient design
#

Key features of the operator's station include:

  • Large grab handles on each fender make getting on and off the tractor easy.
  • Controls are shape and color-coded for easier identification and operation.
  • Optional mechanical suspension seat improves operator comfort and reduces fatigue.
  • A left-side step is in base equipment to enhance access to the operator's station.
  • The mechanical suspension seat gives the operator a comfortable ride. The seat flips forward for protection from the elements.
  • Seat suspension is adjustable for the operator's weight and height.
  • Operator weight adjustment adjusts to the operator’s weight 52 kg to 125 kg (115 lb to 275 lb).
  • The seat is adjustable fore and aft for the operator’s height using the lever located under the seat.
Retractable seat beltsRetractable seat belts
#
  • Retractable seat belts prevent belts from becoming tangled in seat suspension and controls

Safety is designed into all 4M and 4R Series Tractors.

  • Operator presence system ensures the operator is in the seat to run the tractor
    • If the operator leaves the seat when front or rear power take-off (PTO) is engaged, the engine shuts down.
    • For stationary PTO work, the tractor must be in neutral and the park brake fully set.
  • The rollover protective structure (ROPS) is designed for operation safety
  • Reflective ROPS strips for better tractor visibility
  • Key switch interlock prevents bypass starting
  • Visual PTO warning light alerts operator when rear PTO is running
  • Placing the transmission in neutral and setting the park brake allows operator to run rear PTO safely when off the tractor seat
  • Turn signal and flashing warning lights operate according to ASAE S279.10 standard
  • Taillights for road transport
  • Slow moving vehicle (SMV) sign for road transport
iMatch Quick-HitchiMatch Quick-Hitch
iMatch Quick-Hitch with rotary cutter hookupiMatch Quick-Hitch with rotary cutter hookup
iMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest customer concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.06 cm (0.76-0.77 in.)
    • Outside diameter: 3.15 to 3.43 cm (1.24-1.25 in.)
  • Lower bushings
    • Inside diameter: 2.24 to 2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63 to 3.66 cm (1.43 to 1.44 in.)

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Easy access to regular service points minimizes service time.
  • Easily removable cowl and side panels, improved hood design, and integrated maintenance position on the grille provide easy accessibility for routine maintenance.
  • Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with John Deere’s exclusive Service ADVISOR™ system.
  • Daily service requirements are minimal and simple to accomplish. Most service interval requirements can be performed with a basic understanding of procedures and common tools.
  • Improved cost of ownership
    • Hydraulic oil service interval changed from 400 to 1200 hours (or 3 years) when using Hy-Gard™ products 
Removable side panelsRemovable side panels
Integrated grille maintenance positionIntegrated grille maintenance position
Removable cowlRemovable cowl

All items in the daily service schedule can be performed without the use of tools:

  • Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessed
  • The engine can be easily accessed by simply raising the hood for more periodic maintenance checks
  • A single-point latch mechanism and self-contained leash ensure easy hood opening and closure

NOTE:  Always refer to the operator’s manual for complete maintenance and service recommendations.

Specifications


Compare the specifications of up to 4 models

Key Specs 4066m
Current Model
Engine power (gross)48.5 kW
65.9 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) powerPRT - 40.4 kW
54.2 hp
eHST - 38.7 kW
51.9 hp
Per SAE J1995
Steering hydraulics23.5 L/min
6.2 gpm
Implement hydraulics42.3 L/min
11.2 gpm
Hitch typeCategory 1
Lift capacity, 24-in. behind link arms1135 kg
2500 lb
Standard transmission; forward/reversePowrReverser transmission (PRT)
Cruise controlOptional
Approximate shipping weight (open-station; cab)Open operator station (OOS) - 1710 kg
3770 lb
Cab - 2120 kg
4675
Wheelbase185.5 cm
73 in.
Engine
FamilyEYDXL2.09HDA
FYDXL2.09HDA
GYDXL2.09HDA
ManufacturerYanmar
Engine model4TNV86CHT-MJT
Engine power (gross)48.5 kW
65.9 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) powerPRT - 40.4 kW
54.2 hp
eHST - 38.7 kW
51.9 hp
Per SAE J1995
Rated engine speed2600 rpm
TypeDiesel
Injection pump typeHigh pressure common rail direct injection
AspirationTurbocharged and charge air cooled
Emissions complianceFinal Tier 4
Cylinders/displacement4 / 2.091 L
4 / 127.6 cu in.
Number of cylindersFour
Cylinder linersCast-in-block
Bore and stroke86 x 90 mm
3.4 x 3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemLiquid
Air cleanerDual element
Engine torque at rated speed178 Nm
131.3 lb-ft
Fuel tank capacity56.9 L
15 U.S. gal.
Cab - 50 L
13.8 U.S. gal.
Electrical
Battery size770 CCA
Alternator (12-V)75 amp
Starter size2 kW
2.68 hp
Fuel system
TypeHigh pressure common rail direct injection
Fuel consumption
Transmission
Standard transmission; forward/reverse12/12 PowrReverser transmission (PRT)
Optional transmission; forward/reverseeHydro transmission (eHST)
Left-hand reverserPRT only
Transmission gear ranges
Final drivePlanetary
BrakesMulti-plate wet disc
SteeringHydrostatic power steering
Clutch, wet/dryWet
Clutch disk diameter wet clutch129 mm
5.08 in.
Axle capacityFront
1600 kg
3528 lb
Rear
2400 kg
5292 lb
CreeperNo
Cruise controlOptional
Differential lockYes
Drawbar maximum vertical load
Hydraulics
TypeOpen center
Pump rated outputSteering
21.5 L/min
5.7 gpm
Implement
38.7 L/min
10.2 gpm
65.86617 L/min
17.4 gpm
Pump typeDual gear
Maximum operating pressure
Draft control sensingPosition control
Remote control valves availableUp to six rear remotes
3-point hitch
TypeCategory 1
Lift capacity, 24-in. behind link arms1135 kg
2500 lb
Power take-off (PTO)
StandardIndependent 540 rpm at 2600 rpm
Optional
ControlIndependent
ClutchWet disc
Brake (for mid and rear PTO)
Engagement method
Fluid capacities
Crankcase with filter5.3 L
1.4 qt
Transmission and hydraulic system47.3 L
12.5 gal.
Final drive
TypePlanetary
Differential lockYes
Operator station
Rollover protective structureType
Fixed
Yes
Platform - flat/straddleFlat
Gear shift location - console/floorPRT - Left-hand side
Cab
Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment
Dimensions
Wheelbase185.5 cm
73 in.
Front axle clearance35.1 cm
13.8 in.
Turning radius with brakes2.8 m
9.19 ft
Turning radius without brakes3 m
9.84 ft
Limited slip differential
Approximate shipping weight (open-station; cab)Open operator station (OOS) - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb
Tires
FrontFarm - 8-16
Turf - 27x10.5-15
Industrial - 10-16.5
RearFarm - 14.9-24
Turf - 44x18-20 or 22.5LL-16.1
Industrial - 16.9Lx24
Front tread range148.1 cm
58.3 in.
Rear tread spacing137.2 cm
54 in.
Miscellaneous
Toolbox
Tilt steering wheel
12-V Outlet

Accessories and Attachments

Backup Alarm

The backup alarm is an audible alarm that informs operator and bystanders when unit is in reverse.

 

For cab and open-station tractors.

 

NOTE: Requires eHydroTM transmission option.

Ballast

Ballast box shown with extensionBallast box shown with extension

The ballast box can be used to carry additional ballast for greater tractor stability.


A 9-in. high extension can be added to ballast box for even greater capacity.


A bushing kit is required for the ballast box to be used with the iMatch™ Quick Hitch.

BW14701 ballast box shown with BW15074 extensionBW14701 ballast box shown with BW15074 extension
WP16011033 large ballast boxWP16011033 large ballast box

Ballast boxes can be used to carry additional ballast for greater tractor stability.

 

NOTES:

1. Ballast box BW14701 has Category 1 pins and is compatible with a Category 1, 3-point hitch. It can be made Category 1 quick-hitch (iMatch™ hitch) compatible by adding BW15056 bushing kit.

2. The large ballast box (WP16011033) has Category 2 pins and is compatible with a Category 2, 3-point hitch. The large ballast box (WP16011033) is not quick-hitch-compatible.

3. Requires (2) R66432 bushing, (1) M115827 quick-lock pin, (1) R58262 pin, and (1) T12553 bushing to convert Category 1 ballast box to Category 2.

Draft Link

Drawbar

Magnetic hitch pinMagnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Tractor Drawbar Assembly - BLV10844

Engine

Engine coolant heater kitEngine coolant heater kit

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts.

 

NOTE: It is recommended to install optional engine coolant heater, transmission oil heater, and battery heating pad (A22400P - ordered through A and I) if operating machine in temperatures below -18 ⁰C (0⁰F).

Exhaust

Front Weights

Weight kitWeight kit

Rod and pins that allow weights to be bolted together to remain on tractor.

Weight bracket extension installed on a 3120Weight bracket extension installed on a 3120

Can be attached to tractor to allow using up to 12 front weights. Extension kit includes extension bracket, hardware, rod, and pins.

 

Order weights separately.

 

Allow 30 minutes to install.

 

NOTE: Front weights and front hitch are not compatible on same tractor.

Weight bracket extension installed on a 3120Weight bracket extension installed on a 3120

Can be attached to tractor to allow using up to 12 front weights. Extension kit includes extension bracket, hardware, rod, and pins.

 

Order weights separately.

 

Allow 30 minutes to install.

 

NOTE: Front weights and front hitch are not compatible on same tractor.

Quik-Tatch Weight, 70 lb (32 kg) - LVU32113

Front Wheels And Tires

10-16.5 (6PR, R4 Industrial, 2 Position) Front Wheels & Tires - BLV10872

27x10.50-15 (4PR, R3 Turf, 2 Position) Front Wheels & Tires - BLV10874

27x12LL-15 (6PR, R3 Turf Special, 2 Position) Front Wheels & Tires - BLV10876

8-16 (6PR, R1 Bar, 2 Position) Front Wheels & Tires - BLV10870

Hood Guards

#
#

A hood guard with brush screen for 4R Tractors.

#
#

A hood guard with brush screen for 4R Tractors.

Hydraulics

Dual mid-selective control valveDual mid-selective control valve
#

When ordered with the loader, the tractor is equipped with a loader mounted hydraulic valve.

  • Hydraulic valves have excellent feather ability for smooth operation of equipment
  • Ordered as factory or field-installed option
Optional rear hydraulic couplers - selective control valves (SCVs)

Up to five additional SCVs can be added:

  • Loader-mounted valve
  • Single mid electrohydraulic (EH) SCV
  • Dual rear SCV 
  • Power beyond

NOTE: Power beyond cannot be installed without a D170 Loader.

EH third SCV kit
EH third SCV and power beyondEH third SCV and power beyond
#
  • Contains stackable EH valve, front-mounted couplers, control switch and hydraulic lines (rear tube kit available separately)
  • Provides continuous flow functionality for operating motor driven attachments such as a hydraulic broom
  • Allows routing to the front or back of the tractor, allowing operation of three SCVs in the front and rear of the tractor.
Fourth and fifth rear SCV kit (dual rear SCV)
Fourth and fifth SCVFourth and fifth SCV
Fourth and fifth SCV (dual rear SCV)Fourth and fifth SCV (dual rear SCV)
  • Contains two rear-mounted couplers, hydraulic lines and control levels
  • Provides continuous flow functionality for operating motor-driven attachments such as a hydraulic broom and float function
  • Provides float function
SCV controls
SCV controlsSCV controls
#

This attachment allows for the installation of the dual mid-valve kit on 4M Tractors. With this kit, 4M Tractors can utilize various implements, such as the 440R Loader, as well as other hydraulically-driven implements. This kit allows the 4M Tractor to operate hydraulically and function similar to the 4R Open-Station Tractors.

 

The kit contains the dual mid-valve, loader joystick, hydraulic lines, and all fittings / hardware that is required.

Dual mid-valve (shown on 4R)Dual mid-valve (shown on 4R)
Hydraulic lines from mid-valve to tractorHydraulic lines from mid-valve to tractor
Two-function joystick (shown on 4R)Two-function joystick (shown on 4R)
Complete kit images
#
#

Available Dec, 2016

Electrohydraulic Third SCV Kit with Rear Tubing - BLV10767

Electrohydraulic Third SCV Kit with Rear Tubing (OOS Only) - BLV10764

Dual mid-selective control valveDual mid-selective control valve
#

When ordered with the loader, the tractor is equipped with a loader mounted hydraulic valve.

  • Hydraulic valves have excellent feather ability for smooth operation of equipment
  • Ordered as factory or field-installed option
Optional rear hydraulic couplers - selective control valves (SCVs)

Up to five additional SCVs can be added:

  • Loader-mounted valve
  • Single mid electrohydraulic (EH) SCV
  • Dual rear SCV 
  • Power beyond

NOTE: Power beyond cannot be installed without a D170 Loader.

EH third SCV kit
EH third SCV and power beyondEH third SCV and power beyond
#
  • Contains stackable EH valve, front-mounted couplers, control switch and hydraulic lines (rear tube kit available separately)
  • Provides continuous flow functionality for operating motor driven attachments such as a hydraulic broom
  • Allows routing to the front or back of the tractor, allowing operation of three SCVs in the front and rear of the tractor.
Fourth and fifth rear SCV kit (dual rear SCV)
Fourth and fifth SCVFourth and fifth SCV
Fourth and fifth SCV (dual rear SCV)Fourth and fifth SCV (dual rear SCV)
  • Contains two rear-mounted couplers, hydraulic lines and control levels
  • Provides continuous flow functionality for operating motor-driven attachments such as a hydraulic broom and float function
  • Provides float function
SCV controls
SCV controlsSCV controls
#

Load Center Assembly (PRT Only) - BLV10498

Power Beyond Kit (Cab and OOS) - BLV10969

Top and Tilt Field Kit (OOS Only) - BLV10965

Lighting

Rear work lightRear work light

This kit provides light to the rear of the tractor for evening work.

 

For open-station tractors only, this kit contains individual light.

 

Allow 30 minutes to install.

 

NOTE: Kit includes one rear light.

NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.

NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.

#

The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.

 

NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).

 

NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).

 

NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).

#
#

 Rollover protective structure (ROPS) mounted LED work lights

An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.

This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
  
The halogen work light kit attachment is still available (LVB25546).

Shown on 4000 TEN Series TractorShown on 4000 TEN Series Tractor

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

For open-station tractors only.

Two guards included in each kit.

#
#
#

An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:

  • Two light-emitting diode (LED) fender lights
  • Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
  • One LED rear PTO light

Miscellaneous

Cruise Control Kit - BLV10388

Typical home maintenance kitTypical home maintenance kit

Filter Paks are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual. These kits contain an oil filter, air filter, fuel filter and hydraulic filter, offering a complete solution for all your customers’ maintenance needs to keep their tractors running at peak performance.

 

Benefits of Filter Paks:

  • Convenience – all filters in one package 
  • Value – better pricing than purchasing individual components
  • Performance – you get the most out of the capability of your tractor

 

Easy to understand – indicates models and contents so you never have to worry about the right filters for your compact utility tractor

A horn provides audible alert to bystanders.

Allow 20 minutes to install.

Rear License Plate Kit (Includes Light) - BLV10924

Toolbox kit for 4000 TWENTY Series TractorsToolbox kit for 4000 TWENTY Series Tractors

Toolbox is designed for installation on all 4000 TWENTY Series Open-Station and Cab Tractors.

This handy toolbox kit provides easy access and convenient storage for tools.

  • Constructed of steel for durability and long life
  • Dimensions:
    • Length: 19 in. (483 mm)
    • Width: 6 in. (153 mm)
    • Height: 6.2 in. (160 mm)
  • Can be easily removed, if desired
  • Installation time: 1/2 hour
  • Kit includes toolbox and components required for installation. The toolbox can be mounted in one of three locations on the front of the tractor as follows:
    • On the front of the integrated weight bracket
    • In the raised position to permit installation of front weights
    • On the front of the tractor hood guard
Toolbox at front postionToolbox at front postion
Toolbox at raised positionToolbox at raised position
Toolbox on brushguardToolbox on brushguard

Open Operator's Station

CanopyCanopy

The canopy attaches to the rollover protective structure (ROPS) to protect the operator from inclement weather.

NOTE: Additional mounting brackets are required to adapt the canopy (LVB25334) to ROPS. See ordering information below.

Standard canopyStandard canopy
Deluxe canopyDeluxe canopy

The canopy attaches to the open operator station rollover protective structure (ROPS).
The 1613.2-mm (63.5-in.) long, 1322.7-mm (52-in.) wide ABS canopy  can offer protection to the operator from inclement weather and direct overhead sunlight.

 

NOTE: Additional mounting brackets are required to adapt the canopy (LVB25334) to ROPS. See ordering information below.

 

NOTE: Deluxe canopy (LVB25785) includes additional headliner and marker lights for select open station models and also requires LVB25332.

Large seat coverLarge seat cover
  • Cushioned seat for extra comfort
  • Fabric coated for maximum water resistance and repellency
  • Elastic cord locks around safety sign on seat back
  • Elastic cord in bottom hem for a custom fit
  • Handy zippered storage case
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Large seat cover
Order number: LP95233

Left Hand Mirror Kit - BLV11034

Premium Seat Kit (OOS Only) - BLV10401

Right Hand Mirror Kit - BLV11035

UmbrellaUmbrella

Provides the operator the necessary shade and protection from the elements.

  • Attaches to the tractor's rollover protective structure (ROPS)
  • For open-station tractors only

Power Take-off (Pto)

Rear Wheel Weights

Attaching Hardware for Rear Wheel Starter Weight, 45 lb - BM19936

Attaching Hardware for Starter Rear Wheel Weight, 110 lb (50 kg) - BM19939

Attaching Hardware for Starter Rear Wheel Weight, 55 lb (25 kg) - LVB25004

Attaching Hardware for Additional Rear Wheel Weight, 110 lb (50 kg) - BM19940

Attaching Hardware for Additional Rear Wheel Weight, 55 lb (25 kg) - BM19937

Rear Wheel Weight, 48.5 lb - BM17968

Rear Wheels And Tires

13.60-28 (4PR, R1 Bar, 5 Position) - BLV10871

16.90-24 (6PR, R4 Industrial, 2 Position) Rear Wheels & Tires - BLV10873

22.50LLx16.1 (6PR, R3 Turf Special, 1 Position) Rear Wheels & Tires - BLV10877

44x18-20 (4PR, R3 Turf, 1 Position) Rear Wheels & Tires - BLV10875

Provide added traction in snowy and icy conditions.

Provide added traction in snowy and icy conditions.

Provide added traction in snowy and icy conditions.

Three-point Hitch

3-Point Hitch Tractor Receiver Hitch - LP25001

iMatch Quick Hitch Bushings - LVU12858

iMatch Quick Hitch Bushings - LVU15507

iMatch Quick-Hitch (LVB25255)iMatch Quick-Hitch (LVB25255)
iMatch Quick-Hitch with rotary cutter hookup (LVB25255)iMatch Quick-Hitch with rotary cutter hookup (LVB25255)
iMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest customer concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

 

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

 

NOTE: In the picture above, you see the bushing set. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 0.76-0.77 in.
    • Outside diameter: 1.24-1.25 in.
  • Lower bushings
    • Inside diameter: 0.88 to 0.89 in.
    • Outside diameter: 1.43 to 1.44 in.
Bushing kit for Quik-CouplerBushing kit for Quik-Coupler

Required for hookup to a tractor with Category 1 or 2 Quik-Coupler hitch.

Transmission

Weights

Wheel Tread Width

Wheels And Tires

Provide added traction in snowy and icy conditions.

Reviews

5

2 reviews

Rating Snapshot

2
0
0
0
0
3.5
5
5

Awesome Product!

5/5

We finally upgraded to a 4066M after having older smaller John Deere utility tractors and this on out does them all. Have used the tractor for tilling, 3-point mower, 3-point blade, and loader work. Engine has plenty of power. Zero issues with exhaust regens, just simply do it as the tractor asks. We chose the eHydrostatic option and couldn't be happier. All in all its a great all around tractor for the money, and we would definitely recommend.

Pros

  • ease of use
  • great power
  • reliable

Cons

Farmerdan

From: Carver, MN, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

4066m

5/5

I haven't logged many hours yet and will try and update at a later time but so far I love my new 4066m. Regarding the regen... so far so good, my dealer suggested to try and run a minimum of 1800 rpm to keep the soot levels lower. At 1800, its louder than I would like while doing light work, but operates very very well at that RPM, just something that I will have to get use to. I got the HST transmission which is extremely easy to use and the large 66hp engine seems to have gobs of pto power. I would suggest to ask your dealer about getting the H180 loader with the controls closer in at the seat instead of the included 170. The 170 loader has the controls mounted on the loader and requires you to hold your arm out and "reach"...the H180 is waayy more comfortable. It also allows you to detach the loader and bucket more easily. All other tractor controls seems to be well placed and easy to use. I love the internal fender mounted toolbox! I listed the "value" as being fair...w/o the large rebate at the time I feel it might have been priced too high. All in all I am happy with my purchase and will recommend it in the future.

Pros

Cons

DABI

From: Texas

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Beginner

2
2
5

© COPYRIGHT 2024 LEGACY EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo

NOT SET