1025R

Sub-Compact Tractor

  • Powerful Tier 4-compliant diesel engine
  • New, easy-lift hood with dual gas-charged lift struts
  • Premium Operator Station with ergonomic seat, armrests and fender lights
  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes

Apply For Financing

Buy Now

View Product Brochure

*Must pre-order a new John Deere 1 - 4 Series tractor in order to be eligible for the Free pickup and delivery for life offer. Must be within 30 miles of a Legacy Equipment location. Offer is valid on the timespan the original customer who preordered the John Deere Tractor owns it. Non-transferable. Some restrictions may apply. See Legacy Equipment for complete details.



Features



Powerful engine
  • Tier-4-compliant isolated Yanmar® TNV clean and silent diesel engine
  • 24.2 gross hp (PS) - 18.0 power take-off (PTO) hp
  • 3200 rpm rated speed
Strong hydraulics
  • Standard dual mid-selective control valve (SCV) with integrated loader joystick
  • Third-SCV kit
  • Power-beyond kit
  • Independent hydraulic-lift kit
Comfortable operator station and controls
  • Ag tractor family styling with sloping hood design
  • Folding rollover protective structure (ROPS)
  • Deluxe-suspension seat with armrests
  • Standard cruise control
  • Tilt steering
  • Standard tool box
  • 12-V outlet
  • Ergonomic-floor mat
  • Cup holder
  • Standard side fender lights
Versatile implements
  • D120 and H120 Loaders
  • 54D AutoConnect™ and 60D AutoConnect 7-Iron™ mower decks
  • Material-collection system
  • 260 Backhoe
  • iMatch™ AutoHitch™
  • Rotary brooms 132.1 cm and 152.4 cm (52 in. and 60 in.)
  • Front blade 137.2 cm (54 in.)
  • Snow blowers 119.4 cm and 137.2 cm (47 in. and 54 in.)
  • Rotary tillers (647)

 

Yanmar is a U.S.-registered trademark of Yanmar Company Limited.

Both 4WD and power steering are standard equipment on the 1025R. This combination allows for excellent maneuverability and ease of operation of the tractor.

  • Narrow overall width allows the 1025R to work in tight areas where most compact tractors just cannot fit, yet the 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all type of terrains.
  • Power steering means fewer turns of the steering wheel than manual steering; especially valuable when mowing around obstacles or when the tractor is used with a front loader.
  • High horsepower-to-weight ratio makes the 1025R a good choice for a variety of tasks; overall tractor weight reduces ground compaction and makes the 1025R an excellent mowing tractor.
  • The power take-off (PTO) is a fully-independent PTO on the 1025R, allowing engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
  • Front Quik-Tatch™ hitch makes changing front implements quick and easy
  • All front implements (blade, brooms, and snow blowers) use a common hitch
  • AutoConnect™ mid-mount mower decks, D120 and H120 Loaders, and 260 Backhoe can be taken on or off within 5 minutes, and no tools are necessary
  • Changing rear implements is a snap with the iMatchTM Quick-Hitch, which has three fixed points to back in and pick up a rear implement that is iMatch compatible

*Features shown are available with all current model year tractors.

Implement compounding (1025R Tractor shown)Implement compounding (1025R Tractor shown)
  • Allows mounting more than one implement at a time, eliminating implement changeover
  • Loader, mid mower, backhoe, and a variety of 3-point hitch implements can be attached to the tractor at the same time

The 1023E and 1025R Tractors feature a HST.

  • Fluid under pressure transmits engine power to the drive wheels through a hydraulic pump and motor
  • The hydrostatic-drive unit functions both as a clutch and transmission
Twin Touch foot controls Twin Touch foot controls

Twin Touch foot controls allow selecting both speed and direction of travel with a touch of the toe. Ideally suited for jobs where productivity is a must, such as loader or mower applications.

  • Infinite ground speeds, even at full throttle, to match the job
  • No clutching for fast direction changes
  • Faster, easier, and more precise to operate than competitive tractors with treadle pedal design (toe-heel)
  • Provides high torque for start up
  • Reduces power train shock loads
  • Large foot pedals were designed for operator comfort and allow for convenient operation of the tractor
Two-speed transmissionTwo-speed transmission

Transmission has two speeds - Hi and Lo range.

  • The range lever is located next to the seat, conveniently within reach of the operator
  • Lo range allows performing tougher tasks at higher speeds than competitive tractors equipped with a three-range transmission (that is, lo range on three-speed transaxle is slower than lo range on a two-speed transaxle)

 

Durability features include:

  1. Large forged one-piece trunnion shaft with larger support bearings that reduce vibration and noise.
  2. Innovative transaxle combines an HST, gear reduction axle, and clutch.
  3. Pressure side filtration allows using a finer-mesh filter (10 micron) than suction filtration systems use on many competitive tractors.
  4. One pump to supply charge pressure and implement flow. A flow divider splits the flow to various circuits throughout the tractor.
  5. The transaxle has an oil cooler which provides improved hydraulic cooling performance.
Open operator's stationOpen operator's station

The 1025R operator's station has been designed to allow greater operator comfort and increased visibility. Large and easy to grab handrails are located on each fender for an easier on and off of the tractor from either side.

  • Sloping hood design provides improved visibility
  • Operator's station provides plenty of room for comfortable operation
  • Step-through textured flat operator station makes getting on and off the tractor easy from either side of the tractor 
  • Fender-mounted handrails are large and easy to grab; located on each fender, they assist the operator in getting on and off the tractor
  • Controls are located next to the fenders for operator convenience
  • Operator controls are color-coded for easy identification of operation
  • Front-horizontal exhaust for increased operator visibility

*Features shown are available with all current model year tractors.

Operator presence systemOperator presence system
  • If the operator leaves the tractor seat when the transmission, mid or rear power take-off (PTO) is engaged, the engine will shut down
Foldable Roll-Gard ROPS Foldable Roll-Gard ROPS

Foldable Roll-Gard™ rollover protective structure (ROPS) and retractable-seat belt are standard equipment to protect the operator in the event of a tractor tip-over, as well as improve the ability to store tractor in a garage.

 

Seat belt is within easy reach of the operator, to encourage the use of it whenever operating the tractor.

*Features shown are available with all current model year tractors

Lighting
Standard (and optional) lighting shownStandard (and optional) lighting shown

Standard equipment lighting includes:

  • Two front-mounted sealed-beam halogen headlights
  • Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
  • Two additional fender lights are standard on the 1025R
  • Additional front- and rear-light kits are available

*Features shown are available with all current model year tractors

iMatch Quick-HitchiMatch Quick-Hitch
iMatch Quick-Hitch with rotary cutter hookupiMatch Quick-Hitch with rotary cutter hookup
iMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
    • Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
  • Lower bushings
    • Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
Gas-lift springGas-lift spring
  • The under-hood gas-lift support provides easy one-finger access to the engine compartment and eliminates the need for a mechanical prop rod.
  • This design of the support structure provides excellent rigidity for the hood.
1025R Tractor1025R Tractor
  • The 1 Family tractors includes factory-installed mechanical deck lift components.
  • The addition of these components from the factory significantly reduces the time required to do the initial mower deck installation at the time of purchase.
  • Refer to the mowers and material collection page for more details on mower deck installation and compatibility.

The cab offers protection from the elements and expands the versatility of 1025R Tractors to perform in all climates.

1025R Cab – LP680871025R Cab – LP68087
#

Key features:

  • Full glass doors for maximum visibility
    • Curved glass for a styled look
    • Sealed for cold weather operation
    • Easily removable for summer operation
  • Heater with fan
    • Switches and vents integrated into headliner
  • Dome light
  • Fully openable front and rear windows with gas struts
  • Front sun visor
#
#
  • Front work lights
#
#
  • Front wiper with washer system
  • Dual outside mirrors
  • Rollover protective structure (ROPS) certified cab frame
    • Allows for improved rear visibility
    • Reduces overall height
  • Rubber isolation at all mounting points
  • Interior sound insulation
#
#
  • Immersion-primed and powder-coated cab frame
    • Provides superior corrosion resistance
  • Integrated John Deere styling
#
#

Specifications:

  • Cab height: 1525 mm (60 in.)
  • Overall height when installed: 1990 mm (78.4 in.)
  • Overall height when installed to top of beacon: 2159 mm (85 in.)
  • Overall width with cab installed: same as tractor width
  • Cab weight: 200 kg (440 lb)
#
#
#

Optional kits:

  • Rear wiper kit – BLV11241
  • Stereo kit – LVB26198
  • Radio (AM/FM, weatherband, SIRIUS® Satellite, and iPod® ready) - SWJHD1630
  • Beacon light kit – BLV11024
  • Light-emitting diode (LED) rear work light kit – BLV11244
  • Illuminated license plate kit – BLV11246                                       

Compatibility and Installation:

  • Not compatible with:
    • 1023E
    • 1025R TLB (FILB)
    • 1026R TLB (FILB)
  • Compatible with all tractor implements except 260 Backhoe.

 

SIRIUS is a trademark of Sirius XM Radio, Inc. iPod is a trademark of Apple Inc.

Specifications


Compare the specifications of up to 4 models

Key Specs 1025r
Current Model
Engine power (gross)17.8 kW
23.9 hp
24.2 PS
SAE J1995 rated power
Power take-off (PTO) power13.4 kW
18 hp
Steering hydraulics13.2 L/min
3.5 gpm
Implement hydraulics13.2 L/min
3.5 gpm
Hitch typeLimited Category 1
Lift capacity, 24-in. behind link arms309 kg
681 lb
Standard transmission; forward/reverseHydrostatic - 2 range
Cruise controlStandard
Approximate shipping weight (open-station; cab)655 kg
1444 lb
Wheelbase145 cm
57.1 in.
Engine
FamilyEYDXL1.27NS1
FYDXL1.27NS1
GYDXL1.27NS1
ManufacturerYanmar
Engine model3TNV80F-NCJT
Engine power (gross)17.8 kW
23.9 hp
24.2 PS
SAE J1995 rated power
Power take-off (PTO) power13.4 kW
18 hp
Rated engine speed3200 rpm
TypeDiesel
Injection pump typeIndirect Injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacement3 / 1.267 L
3 / 77.3 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke80x84 mm
3.15x3.31 in.
Compression ratio23.0:1
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element with mechanical restriction indicator
Engine torque at rated speed55.2 Nm
40.7 lb-ft
Fuel tank capacity21.2 L
5.6 U.S. gal.
Electrical
Battery size500 CCA
Alternator (12-V)40 amp
Starter size1.2 kW
1.6 hp
Fuel system
TypeIndirect Injection
Fuel consumption
5.8 L/hr
1.5 U.S. gal./hr
Transmission
Standard transmission; forward/reverseHydrostatic - 2 range
Optional transmission; forward/reverse
Left-hand reverserNo
Transmission gear ranges
Final driveBull Gear
BrakesWet disc (left-hand pedal)
SteeringPower
Clutch, wet/dryN/A
Clutch disk diameter wet clutch
Axle capacityFront
612 kg
1349 lb
Rear
715 kg
1576 lb
CreeperNo
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load
Hydraulics
TypeOpen center
Pump rated outputSteering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump typeGear
Maximum operating pressure137.9 bar
2000 psi
Draft control sensingPosition control
Remote control valves availableTwo
3-point hitch
TypeLimited Category 1
Lift capacity, 24-in. behind link arms309 kg
681 lb
Power take-off (PTO)
StandardRear - 540 rpm
Mid - 2100 rpm
Optional
ControlIndependent
ClutchWet disc
Brake (for mid and rear PTO)Wet disc
Engagement method
Fluid capacities
Crankcase with filter2.7 L
2.9 qt
Transmission and hydraulic system3.7 gal.
14 L
Final drive
TypeBull Gear
Differential lockYes
Operator station
Rollover protective structureType
Foldable
Yes
Platform - flat/straddleOne-piece semi flat
Gear shift location - console/floorLeft-hand side
Cab
ComplianceNA
VisibilityNA
Air conditioning, temperature differentialNA
DoorsNA
Noise ratingNA
Seat equipmentNA
Dimensions
Wheelbase145 cm
57.1 in.
Front axle clearance195 mm
7.7 in.
Turning radius with brakes
Turning radius without brakes2.25 m
7.4 ft
Limited slip differentialNo
Approximate shipping weight (open-station; cab)655 kg
1444 lb
Tires
FrontR4 - 18x8.5-10
RearR4 - 26x12-12
Front tread range91.8 cm
36.1 in.
Rear tread spacing
Miscellaneous
ToolboxYes
Tilt steering wheel
12-V Outlet

Accessories and Attachments

Ballast

Ballast boxBallast box
Ballast box with 3E TractorBallast box with 3E Tractor

A ballast box can be used to carry additional ballast for greater tractor stability.

 

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

 
Ballast box extension 

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

 

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

Ballast box with extensionBallast box with extension

The ballast box can be used to carry additional ballast for greater tractor stability.

 

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

 

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

 

The ballast box extension is only available through Parts; it is not a factory option.

Cab Operator's Station

Console Adapter Kit for Non-Current Tractors - LP68119

Drop-on cab from Mauser (Heat Only) - LP68087

Illuminated Rear License Plate Kit - LP68118

Rear LED Work Light Kit - LP68117

Rear Wiper Kit - LP68115

Stereo Kit - LP68120

Cold Start Packages

Engine block heater adapterEngine block heater adapter

Fits into engine block to help provide faster and easier starts in extremely cold weather (below 0°F or –18°C). Uses 110-volt electricity.

Allow one hour to install.

Drawbar

Magnetic hitch pinMagnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Engine

Engine coolant heater kitEngine coolant heater kit

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts.

 

NOTE: It is recommended to install optional engine coolant heater, transmission oil heater, and battery heating pad (A22400P - ordered through A and I) if operating machine in temperatures below -18 ⁰C (0⁰F).

Exhaust

Front Weights

Front Wheels And Tires

18x8.50-10 (4PR, R3 Turf, 1 Position) Front Wheels and Tires - BLV10859

18x8.50-10 (4PR, R4 Industrial, 1 Position) Front Wheels and Tires - BLV10857

Hydraulics

3rd Function Selective Control Valve - BLV11143

Power Beyond Kit - BLV11216

Power Beyond Kit (1023E, 1025R, 1026R) - LVB25956

Third SCV kitThird SCV kit
#

Includes single-lever control, hydraulic lines, and rear-mounted couplers with one set of outlets.

  • Allows using third spool on SCV
  • Provides a single set of rear SCV outlets for added versatility

Rear Selective Control Valve Kit - BLV11217

Rear-hydraulic outlet kitRear-hydraulic outlet kit

The rear-hydraulic outlet kit routes hydraulic power from dual mid-selective control valves to two sets of couplers at the rear of tractor.

Rear Tubing Kit - BLV10948

Lighting

Rear work lightRear work light

This kit provides light to the rear of the tractor for evening work.

 

For open-station tractors only, this kit contains individual light.

 

Allow 30 minutes to install.

 

NOTE: Kit includes one rear light.

NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.

NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.

Beacon Light Kit - LP68116

#

The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.

 

NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).

 

NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).

 

NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).

#
#

 Rollover protective structure (ROPS) mounted LED work lights

An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.

This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
  
The halogen work light kit attachment is still available (LVB25546).

#
#
#

An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:

  • Two light-emitting diode (LED) fender lights
  • Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
  • One LED rear PTO light

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

Two guards are included in each kit and are for open-operator station (OOS) tractors only.

#
#
#

An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:

  • Two light-emitting diode (LED) fender lights
  • Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
  • One LED rear PTO light

Miscellaneous

Typical home maintenance kitTypical home maintenance kit

Filter Paks are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual. These kits contain an oil filter, air filter, fuel filter and hydraulic filter, offering a complete solution for all your customers’ maintenance needs to keep their tractors running at peak performance.

 

Benefits of Filter Paks:

  • Convenience – all filters in one package 
  • Value – better pricing than purchasing individual components
  • Performance – you get the most out of the capability of your tractor

 

Easy to understand – indicates models and contents so you never have to worry about the right filters for your compact utility tractor

Rear License Plate Kit (Includes Light) - BLV11042

Tractor Cover - LP95637

Open Operator's Station

Canopy Kit - Rigid Plastic - LP64809

Seat Cover - LP68694

Operator''s Station

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.

 

Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.

Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount
Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount

RAM is a trademark of National Products Inc.

Power Take-off (Pto)

Rear Wheels And Tires

26x12-12 (4PR, R3 Turf, 1 Position) Rear Wheels and Tires - BLV10858

26x12-12 (4PR, R4 Industrial, 1 Position) Rear Wheels and Tires - BLV10856

Three-point Hitch

3-Point Hitch Tractor Receiver Hitch - LP25001

iMatch Quick Hitch Bushings - LVU12858

iMatch Quick Hitch Bushings - LVU15507

iMatch Quick-Hitch bushingiMatch Quick-Hitch bushing
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

iMatch Quick-Hitch Bushings
Order number: LP19969

iMatch Bushing Kit - LP25004

iMatch Quick Hitch Upper Adapter Bushing - PM00353

iMatch Quick Hitch Upper Adapter Bushing - PM03008

iMatch Quick-Hitch (LVB25255)iMatch Quick-Hitch (LVB25255)
iMatch Quick-Hitch with rotary cutter hookup (LVB25255)iMatch Quick-Hitch with rotary cutter hookup (LVB25255)
iMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest customer concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

 

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

 

NOTE: In the picture above, you see the bushing set. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 0.76-0.77 in.
    • Outside diameter: 1.24-1.25 in.
  • Lower bushings
    • Inside diameter: 0.88 to 0.89 in.
    • Outside diameter: 1.43 to 1.44 in.
iMatch quick-coupler bushing kitiMatch quick-coupler bushing kit

This bushing kit is for use with Category 1 implements (ballast box) to make them function correctly with the iMatch Quick-Hitch.

Tire Chains

Tire chainsTire chains

Tire chains increase traction dramatically under ice and snow conditions.

NOTE: Not intended for use on all four rear tires on the TH 6x4.

Weights

#

One or two 23-kg (50-lb) cast-iron weights may be installed on each rear wheel to provide extra traction and stability.

  • Made of durable cast iron and painted John Deere yellow
  • May be installed with wheel in either the narrow or wide position
  • To stack the weights and install two on a wheel, two 1/2x8-in. bolts are required per wheel (not furnished)
23-kg (50-lb) plastic-shell rear-wheel weight23-kg (50-lb) plastic-shell rear-wheel weight

One 23-kg (50-lb) plastic-shell rear-wheel weight may be installed on each rear wheel to provide extra traction and stability.

  • Outer shell made of tough polyethylene plastic
  • Filled with a heavy granular material that contains a high iron percentage
  • A bonding substance is added to hold the material together so that it will remain intact even if shell is damaged

Multiple stacking is not recommended.

 

Overall width of the tractor will be increased by approximately 5 cm (2 in.) when weights are installed.

Schematic of weight installed on wheelSchematic of weight installed on wheel

Weights are packaged one per carton, with necessary hardware for installation on a wheel, in either the narrow or wide position.

70-lb (32-kg) cast-iron starter weight70-lb (32-kg) cast-iron starter weight
Starter weight with 50-lb (22.7-kg) cast-iron weightStarter weight with 50-lb (22.7-kg) cast-iron weight

70-lb (32-kg) cast-iron starter weights can be bolted to the outside of the rear wheels for ballast.

Additional 50-lb (22.7-kg) cast-iron wheel weights may be bolted to the starter weight.

NOTES:

1. For 26-in. (660-mm) tire and rim only. 

2. Starter weight not for use on all-wheel-steer tractors.

3. X700 Special Edition Tractors (model year 2012 and prior) and X738, X739, and X758 Signature Series Tractors require a BM21497 wheel weight adapter ring on each rear wheel on which weights are to be installed. 

NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.

23-kg (50-lb) cast-iron wheel weights23-kg (50-lb) cast-iron wheel weights

For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter cast-iron wheel weight33-kg (72-lb) starter cast-iron wheel weight

For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)

For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):

 

NOTE: Order two sets for both sides of the tractor

NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.

23-kg (50-lb) cast-iron wheel weights23-kg (50-lb) cast-iron wheel weights

For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter cast-iron wheel weight33-kg (72-lb) starter cast-iron wheel weight

For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)

For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):

 

NOTE: Order two sets for both sides of the tractor

NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.

23-kg (50-lb) cast-iron wheel weights23-kg (50-lb) cast-iron wheel weights

For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter cast-iron wheel weight33-kg (72-lb) starter cast-iron wheel weight

For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:

NOTE: Order two sets for both sides of the tractor.

33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)

For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):

 

NOTE: Order two sets for both sides of the tractor

Quik-Tatch Weight, 42 lb (19 kg) - UC13263

The 1025R Sub Compact Utility Tractor, Factory-Installed, Heated Cab Option

The cab is warm and comfortable with a quality fit and finish. Because it’s factory installed. Add a blade, a front loader, snow blower or a spreader. And you are ready. The 1025R with the factory-installed, heated cab. This is the one for snow.

The Compact Utility Tractor Composite Hood

We design our Compact Utility Tractor Hoods for the harsh, extreme environments they are intended to be used in. We have developed them to be tough and durable. How tough? See what happens when you drop an 8.8 lb (4 kg) Shot Put on one of our composite hoods in – 20 F. (- 28.89 C) temperatures. Don’t do that with a metal hood.

Reviews

4.45

49 reviews

Rating Snapshot

36
6
1
1
1
4.41
4.39
4.61

I could sell these 1025r that's how well I like them 66960

5/5

60 hrs. No problems, no leaks, no remorse! Many yards of gravel moved, tilling food plots, brush hogging and everything works great! Green is worth the bucks. Most of all it makes my four year old grin from ear to ear just to sit on it!!

Pros

Cons

Foreman99

From: Glenwood minn

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Love it

5/5

for my 5 acres it’s perfect. Mower, backhoe and loader

Pros

Cons

Missouridawg

From:

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

Great tractor

5/5

This tractor has done everything it has needed to do. Just remember that it is not a 80hp tractor and things take time. The only thing I dislike is the bouncy little fuel gauge. You pay extra for green and they are the only one without a proper fuel gauge.

Pros

Cons

Farmallman41

From: South bend,In

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

4
2
5

A real review

4/5

This is a great all around Sub Compact. I have a 2018, loader, backhoe, box blade and 60 inch MMM. I am very pleased so far with it but be prepared before you buy one, you need to know a few things. 1. All tractors eventually have small issues. Remember this is not a car. You are buying this to flat out beat on it so you can save your back. I suppose if you baby it, wash it daily, buff it, then maybe just maybe it will never have an issue. What I mean by issues is do not get prissy if a bolt comes loose here or there or if a snap ring comes loose. It is a tractor, it vibrates, they all do no matter what color! 2. This is a subcompact. With that in mind please remember it is not a skid steer and never will be one! Do not expect to go out and lift more than it specs. Also for those that complain about it being under-powered should have considered a larger machine! 3. Yes it has a lot of plastic, plastic that holds ups very well, that does not dent like steel, does not scratch easy, and does not rust! 4. If you are buying this just as a mower, do not waste your time and go get a zero turn. No one in their right mind buys a 1025R just to mow. Now if you have other purposes such as the need for a loader or 3-point attachment than go ahead. And do not listen to the other reviews, IF IT LEAVES LINES OR CUTS WEIRD THEN IT IS JUST OUT OF ADJUSTMENT!!! 5. Backhoe digs very well but you will not set any records with it. 6. 3 point has an adjustable height setting and lock, no others in this size do! 6. Lights are not dim as others state, I cut my grass in the dead of night and have no issues at all! All in all this is a good machine! I shopped it to all the other brands and it came ahead. However, remember that your machine is only as good as the dealer! If your dealer is poor, do not blame the Deere. Make sure you have a good dealer first, no matter what brand you buy!

Pros

  • runs well
  • turns sharp
  • comfortable
  • fun to drive
  • auto connect works well
  • loader/backhoe very easy to remove and attach
  • 150 hours with very minimum issues

Cons

  • drinks diesel like a drunken sailor
  • led lights would be better for less heat
  • neighbors expect you to do free work
  • green attachments a bit pricey

Brinkley1

From: Arizona

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Not worth the money spent for power receieved

3/5

Tractor hydraulics are severely under powered. Only a 681 lb 3 point is very limiting. Speed such slower than my older 2320. I do not buy into all the plastic hype. Headlights are dim. Not enough standard options for the money paid. The engine runs incredibly rough in summer, I cannot even imagine what winter starting will bring.

Pros

Cons

Jaeger

From: Neenah, wi

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Expert

2
2
5

Poor buIlt

2/5

Problems from the time I got it home had a noise under tractor dealer said bolts cross threaded in drive shaft. Dealer fixed that .deck hangs up when raising and lowering . 54inch belly mower cuts poor leaves streaks have to mow over several times defeats having a large deck had a 730 with 54 inch deck cut perfect tractor has spent a lot of days in shop and nothing solved so much for quality control and making customers happy guess I will have to trade for another brand I thought jd was the best but I was fooled

Pros

  • front end loader is good

Cons

  • belly mower does not cut well
  • seat back needs to have adjustment
  • lights need to be led and work light on rear

JT2019

From: Gadsden al

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

2
2
5

more than just a lawn mower

5/5

Being a woman in my 60's I needed a small tractor that I could get up and down on but could handle the job at hand. It handles a single bottom plow with ease, tiller and scrape blade so far w/o any problems and believe you me I dug down deep with that bottom plow! I was use to an 8N and this little tractor reminds me of it. Fits in tight places and the backhoe! Oh that is worth so much!!! I have planted and moved more trees and shrubs and wonder how did I ever live without this thing! It was a real task to learn how to take it off and on but now, no problem. I can't wait to buy a cultivator/planter for it! I love this little tractor and it's perfect for me. It does everything I need it to do and hasn't failed me yet. Oh and the frontend loader is awesome! It's just right for my little hobby farm! I wish I had not waited so long to buy it! Love my 1025R.

Pros

Cons

From: middle georgia

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Probably the best purchase I've made!

5/5

This thing is easy to use, & so versatile. You can do a lot of jobs with it, both big & small jobs. There are a lot of attachments available out there for this machine as well.

Pros

  • easy to use especially in tight spaces.

Cons

Hodgeyzx

From: PA

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Very pleased with performance

5/5

I have owned a 1025R for a little over a year. Simple to operate, maintenance is minimal. Performance is as advertised. One negative comment is about the seat, it is not as comfortable as I expected rear spring seems weak for a 200 lb. person, and not adjustable to different conditions.

Pros

Cons

Peel

From: Decatur Il. area

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Great Little Tractor

5/5

We purchased our 1025 a couple of years or so ago. It is really a well built machine. We live on 5 acres out in the country. If your needing something to remove stumps from the ground; this little tractor just won't do it. If your looking for something to mow with, haul dirt, gravel, or to smooth out your driveway; this little guy is awesome. You just need to know up front what it capabilities are so that you don't exceed them or your expectations are ruined. John Deere makes a great product. I have used mine for all kinds of things. We have knocked down brush and removed it with this. We have cleaned off land with this. If you talk with me, I'll tell you I think we made a wise investment. It's almost paid for now and we love it. My son usually names all our equipment, cars and such. I guess if he were to name this one he would probably be calling it Hulk Jr.

Pros

Cons

wleamon4

From: Old Fort, TN

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Best sub-compact in the market

5/5

When I was shopping for a sub-compact tractor I gave all brands in the area a chance to show me what they got to offer and tested their machines. New Holland, Massey Ferguson, John Deere, Kubota and Mahindra were the brand's I tested on all their sub-compacts, they were all great machines but John Deere was the only one that stood out from the rest in terms of Performance, Durability and Functionality. I bought a new 2019 1025R from premier equipment ospringe location in Wellington County, Ontario, Canada. Their salesperson "Joe" was the person who helped me with my purchase, I went in to look at x500 and x700 series models and ended up with a 1025R with 60" deck and 54" blower because I was blown away on the outstanding customer service that was delivered during my 1 month shopping for a Tractor, Joe answered all my questions and was very knowledgeable on the products. I was never rushed to buy anything and was always available to make time to show me products while I was shopping around. I spoke with their mechanics and asked questions and they were prompt answering and also with a lot of knowledge with their products. So far my 1025R has been working incredible, attachments easy to install and already looking forward to winter to test out my snow blower, I made the right choice picking John Deere, my machine gets a lot of attention from farmers in my area and couldn't be any happier and look forward on purchasing more equipment in the near future.

Pros

  • performance durability functionality

Cons

  • slightly higher cost

Jaalouro

From: Orton, Ontario, Canada

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

It's GREAT

5/5

This compact tractor is a work horse. It eats up loader work with ease and mows like a dream. The controls are easy to use, and removing mower deck is o so easy. Best of you look good operating the tractor......

Pros

Cons

  • wish that wheel weights were an option

sfcmike

From: Adams, TN

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

This tractor is simple to operate.

5/5

I have five acres that I have to keep up with. I use it for mowing, hauling and light dirt work. This tractor is the perfect fit for all my needs. The implements are easy to attach and remove. The tractor is simple to operate.

Pros

  • ease of operation.

Cons

  • no good times radio. lol

Grandaddy

From: Maypearl, Texas

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

This tractor lives up to the quality that I expected from John Deere

5/5

I recently purchased this tractor with the backhoe attachment. I love the way it handles and its smooth operation. The controls were easy to learn and I tend to look for projects so I can get on the machine. There is only one thing I do not like and that is the fact that the tractor only comes with one key. After paying more than $20K for this machine, I tried to get a second key but they had to first order one for me and then I had to pay for it. At only $6 it was not a big deal but that is exactly my point. Why not provide 2 keys to start with and I could have saved myself another trip to the store. That is just cheap business practice.

Pros

Cons

Tuffmonkey

From:

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

4
2
5

Great Little Tractor

5/5

I have had my 1025 for several years and have several hundred hours on it. It has not had any issues. I have the quick release loader, backhoe, 4' box blade, 50" finish mower, 4' rotary cutter/shredder, 4' tiller, imatch quick hitch and pallet forks for the front. I have worked it hard on my hunting property in the country. My main use is on my 3 acres in town. I bought this because of the small size and getting into tight areas and my small barn doors. This thing has been a real back saver for me around the house. The pallet forks have been the most useful implement I own. I use them all the time for work around the yard and pasture at home. The forks will even pick up and carry my round hay baIes (although they are much heavier than what I should be doing with this tractor). It will also pick up my 4-wheelers for loading on trailers. I use counter weight for sure when using the loader or forks. I have 3 larger tractors on our country property, but prefer using this one for many tasks. The seat is much more comfortable (I did as stiffer springs) and it is so easy to get on and off. When it is cold out, I start it and the engine runs rough for just a short time then smooths right out. Not a problem. This is my favorite tractor even though it is small. I am amazed all the work I can do with it. It is also fun to find stuff to do with it!

Pros

  • small size
  • tight turning radius
  • very reliable
  • strong for it's size
  • very adaptable

Cons

  • feels unstable on side slope
  • seat springs too light
  • driveover mowing deck difficult to set up 1st time

UltraPile225

From: Houston, TX

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Compact & mighty yet not intimidating

5/5

This little tractor is only a few inches larger than any of the X series garden tractors although the versatility’s are endless in comparison. My wife has & will not hesitate to move or use it without intimidation. I have worked this tractor through it’s paces the last few month with absolutely no issues or disappointment. Cannot wait for the end of snow season for yard projects & to try out the mid mount mower.

Pros

  • ease of use

Cons

  • cannot run flood & hazard lamps at same time

Justchillaxin1

From: Mpls, Mn

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Versatile and very easy to use.

5/5

Purchased my 2017 model in January of 2019 - it was a dealer floor display model and so had been stored inside, was in new condition. This has been not only a very versatile and easy to use piece of machinery but also a FUN little tractor that surprises me every day with it's power-to-size ratio. Having grown up on the farm with a several large and medium sized tractors I first started looking at the 1 series as more of a large lawn & garden tractor for my acreage in Kansas. This has turned into quite a workhorse that has made the job of brush clearing, brush hogging, tilling, firewood hauling and both lite and heavy landscaping much easier than expected. I retired from a career that physically beat me up and so the idea of doing all of these many projects around my property was a bit daunting and I was concerned I might have to hire out more than a little bit of the work. With my front end loader, some suitcase weights on an easy hitch on the back, some heavy duty tow straps & chains and a full tank of diesel I have been able to remove many invasive trees from around my pond, move large decorative rocks around the property and put a really nice amount of river rock around the foundation of my weekend cabin - none of which would have been possible without my 1025r. I opted to get a 3-point rotary mower instead of the belly mower offered and, for me at least, this has worked out great as I don't need a finished lawn look and the rotary mower (brush hog) cuts short and does a nice job. This tractor is very easy to use and just the right size for most homeowners who have more land than is manageable for a lawn mower and who may have always wanted something with the capability to move gravel, till, mow heavier grass and brush, dig post holes or for tree planting and well...just all sorts of projects that you didn't imagine.

Pros

  • versatility
  • quality of build
  • price
  • dealership support
  • excellent warranty
  • fits in a standard sized garage

Cons

  • price of optional implements

OldBuffalo

From: At the prairie's edge - KANSAS!

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

An Okay Tractor but has issues starting in cold weather

2/5

Tractor seems fine but has issues if you live in colder climate. At even -1 Celsius it struggles, hat to think what it will be like when it gets real cold. If you purchase the brush cutter be aware on less its flat ground it does not have what it takes to lift the brush cutter of the country when on slight hills. Consider a larger tractor if on any type of even small hills.

Pros

Cons

MrTom

From: Nova Scotia, Canada

Length of Ownership: 3months

Usage Frequency: Monthly

Level of Expertise: Intermediate

4
2
5

solid 4 star performer

4/5

Ive had my 1025 for 3 years and have right at 400 hours on it. The only issues I've had with my tractor were not mechanical issues, rather issues with the placement of a few things. If I'm using a rear attachment ant had to turn around and look back, I have often times hit the key with my right knee and turned the tractor off. Likewise, I've hit the light switch with my left knee and have turned the lights on. For the small stature of this tractor, it really works its tail off. I have done a ton of work with this little guy, and it doesn't tear up my yard like a larger tractor would. My wife uses the belly mower all summer long to cut the grass. She loves mowing now after complaining about doing it before we got the 1025. I've had a front seal leak, which I've seen is pretty common. I always make sure it has fluid in it, so I am not planning on replacing the seal. The yellow seat turned black within six months of purchase no matter how much I cleaned it or protected it from the elements. I have a pull type bush hog, 6 foot wide and this tractor handles it very well. This was my first new tractor purchase ever. I have no regrets.

Pros

Cons

RobfromTN

From: Indian Mound, TN 37079, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Little John needs a big brother

4/5

I have owned the 1025R for 3 years with 290 hours of use. Equipped with a front end loader (a must have) a 60 in belly mower and box blade. Have had a couple maintenance issues like leaking fuel line and neutral sensor problem which kept me from starting it. Mow quality is fair on flat ground and so so on a slope. It is a lot faster/more powerful than my JD X380. I live on 5 acres in south Alabama with LOTS of trees and vines with which to deal. Little John does pretty well, but I am going to upgrade to a 2032R for more weight/width/ capacity. Will feel much more secure on a bigger, wider tractor. Still have lots of trees with which to deal from Michael. Have a level lot? 1025 is a fine little tractor.

Pros

  • reliable mostly
  • good power
  • plenty of operator room

Cons

  • light and narrow
  • belly mower uneven

Bamageezer

From: LA...Lower Alabama

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Excellent subcompact tractor

5/5

Took delivery a few weeks ago. This SCUT is a work horse, love the four wheel drive and Yanmar Diesel engine which sips fuel. Got the imatch implement quick attach system, perfect. Also added the MCS20 or material collection system- I highly reccomend this if you want a top shelf bagging system for leaves and grass clipppings. The front end loader or FEL is powerful for such a small tractor. No tiller needed with an FEL and the Piranah tooth bar which I added after purchase. I went with the 54” deck which cuts my centipede grass nicely. You can also add a backhoe later on which is a nice option. You won’t regret this purchase.

Pros

  • a super user friendly tractor!

Cons

  • none that i can think of right now.

Patriot1

From: Shelby, NC, USA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

1025R

4/5

I just purchased this new 1025R tractor with backhoe, loader bucket, and drive on mower. I love the ease of removing backhoe and loader. It is much easier than the old Kubota that I had. Have yet to remove the mover, but I am looking forward to do this when required. Tractor preforms out do the old one I had so far. It is also a bit larger than the Kubota. The only drawback is getting used to the operating requirements, but that will come in time.

Pros

Cons

Malvin

From:

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Beginner

4
2
5

mower deck

5/5

I have owned a 1025 R for 4 years now. It has a 54" quick attach deck on it. No matter what I do to the deck it will not mow without leaving an uncut strip of grass. I have done everything the manual, the JD shop people tell me to do but NOTHING will work. It leaves a strip on both sides of the mower deck no matter how high or low I cut. I have talked to two other people that have the same problem with their decks. Other than this it is the best JD product I have ever owned from a 2355 tractor to a 7810 tractor. This may seem like an easy problem to fix but there are three of us with the same issue. Any suggestions?

Pros

Cons

David

From: Kentucky, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Does everything well

5/5

I bought TLB, Love it!! I added 9 iron finish mow deck, 48" Shredder and 48" Box blade. I have 5 acers, 1/2 mile dirt drive way. This unit works great, easy to use. I love the hydro trans and driver over finish mow deck. Very fast to swap out attachments. I'm very surprised the power this unit had for its size. This is a unit you will keep for years. Having this 1025r for over a year and 300 hours on it, I have to say, my John Deere starts and runs like new, Does not leak a drop, I do take good care of but I do keep out side all the time. All I do is keep oil changed (with maintenance agreement) and keep sprayed off. Very good unit, Bach hoe attachment more useful than I though I would ever use.

Pros

  • well built
  • starts every time
  • great fuel efficency

Cons

  • no cruse control

SusieQ

From: Buffalo Gap, TX 79508, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Great little tractor

5/5

I purchased my 1025R December 2017 and have 77 hours on it already. I use it for my own property (3 acres) and it has made the impossible - possible. From grading soil, removing tree stumps, and hauling brush and debris, this tractor has not let me down in any way. Considering it is a small tractor, it has more than enough power to get just about any job done. It can get into tight areas where a larger machine wouldn't be able to. The backhoe has plenty of power, the loader seems to lift whatever I put in it without any trouble. I purchased my tractor in lieu of renting one. This tractor will pretty much pay for itself the first year.

Pros

  • small
  • powerful
  • reliable

Cons

  • neighbor asking to borrow it

woodsman

From: Hartford, CT, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

EASE OF OPERATION, GREAT ENTRY LEVEL TRACTOR

4/5

PERFECT FOR OUR LANDSCAPE OPERATION WHERE A COMPACT TRACTOR IS TOO LARGE. STILL HAS ADEQUATE POWER TO PERFORM TASKS NEEDED

Pros

Cons

BRADS1025R

From: Central Illinois, IL, USA

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

Would I purchase again? No.

2/5

I can say this unit is a little work horse, when it runs. I have own mine for almost a year now and put nearly 200 hours on it. First week I had a hydraulic leak developed on the loader. Dealership honor the warranty and fixed it. After that it was in and out of the shop because the hydrostat transmission keep creeping. After the 3rd time the plunger assembly that hold the petals in place came loose and the tractor took off down a steep hill. Scared me but luckily the brake were able to stop the tractor under full power. I ended up taking the unit to the dealership 2 more times for this issue before fixing it myself. ( I replaced the LVA17758 and used lock tight on the treads.) At 130 hours on the tractor, a backhoe hose busted that runs in between the main boom. They charge 140 dollars to repair it and also stated, "Wearable Items are not covered under the 2000 hour warranty". Eventually, this escalated to a general manager and was taken care of. Now For the big one. I was bushing hog a field when the tractor completely stopped moving. I turned the unit off and looked underneath it. There was hydraulic oil everywhere. The filter for the transmission was missing and it turns out that the nipple that holds the filter on broke off. This is part of the Cast Aluminum housing, so the transmission casing has to be replaced. Dealership Quoted 3300 dollars for repairs. John Deere really needs to relocate this or change their design to protect this part of the casing. Tip: cycle your glow plugs twice to keep the unit for filling your garage up with black smoke, even if its 95F outside it always sputters during the initial start.

Pros

  • easy to use
  • backhoe removal and installation takes mins
  • great brakes

Cons

  • the location of the hydrostatic transmisson filter
  • no skid plates
  • warranty covers very little

Robert352

From: Gainesville,Fl

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

3
2
5

Great Tractor - It will continually amaze you what it can do

5/5

My 1025R is an amazing tractor. I absolutely love it. I got the 60" auto connect deck, 260B back hoe with thumb and the 120R loader. Everything has worked very well and has that feel of quality. I was worried this tractor was going to be too small. However after operating it I am shocked how capable it really is. I would buy this tractor again without thinking twice. I looked at all the other tractors out there, they are not as well rounded of a machine as this. When you buy a Deere you expect quality, a well engineered machine, easy to use attachments and a machine that just operates well. John Deere delivered and then some. Totally satisfied.

Pros

  • build quality
  • dependable
  • comfort
  • well designed
  • resale value

Cons

  • fuel gauge should be in the dash

Ducky

From: Southern Michigan

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

1025R MAUSER CAB

5/5

JUST PURCHASED///IT DOES FIT UNDER A 7 FOOT GARAGE DOOR!!...IT IS VERY WELL CONSTRUCTED...I LIKE THE UPDATES FROM MY 2014 1025R VERY STABLE HIGHLY RECOMMEND ALONG WITH MY DEALER VALLEY PLAINS EQUIPMENT JAMESTOWN ND

Pros

Cons

MO73

From: JAMESTOWN ND

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

We Love Our 1025R

5/5

We love our NEW 1025R. It's our second. First 2014 1025R with front mount snowblower plus a Curtis Cab--No Good was cold, poor construction had diesel fumes, snow, water and noisy in cab. Now our 2017 1025R with front mounted snowblower plus NEW MAUSER CAB as seen in brochure excellent; warmer, quieter. OUR SALESMAN WAS RICK MARTIN @ THERIAULT EQUIPMENT in Presque Isle, ME. So stop by and get your own today. Don't wait financing available. Nothing Runs Like a Deere! And Also Nothing Blows Snow Like a Deere!!! You can quote me on that. We also own 2-X390 Lawn Tractors also excellant. Tell Rick Martin that Tom Gagnon sent you.

Pros

Cons

tomg

From: St David, Madawaska, ME 04773, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

John Deere compact 1025R , carryover- NEW model year 2016

2/5

I bought this Compact 1025R not because it was cheap >$20k! It was because it was advertised as being very diversified with an auto detached mowing deck , quick attach loader, box blade and snow blower accessories. After operating this tractor for a period of time I found that all of these features advertised with Auto disconnects require near perfect conditions for them to all attach / detach without extra efforts or adjustments. After owning my tractor for one month I decided to detach the mowing deck, when reattaching the mower deck it would not reconnect. I found that the drive shaft assembly linkages we're done in correctly at the John Deere dealership and the service techs did not pay attention to details when installing this assembly so the tractor had to go back to the shop for two days for that correction. Then on month number four I noticed anti-freeze on the floor in my shop. Upon further inspection I found the water pump front shaft seal was leaking! The tractor only has 47 hours on it. Next, I'm finding when the weather is below zero this unit gels up very easily… I've owned diesel tractors before and I have never had gelling issues as this unit seems to have a lot of idiosyncrasies.. I am now waiting for the John Deere dealership shop to pick it up again to put in a new water pump! At this time I'm not too impressed with the level of quality and workmanship coming from John Deere. In closing, this tractor is very expensive and it should not be breaking down with less than 50hrs on it! I hope John Deere improves its workmanship and pays more attention to quality and to all the necessary details in the future construction of these compact tractors as this unit is very frustrating to deal with being brand new. Thanks

Pros

  • it's compact

Cons

  • very particular on almost all facets of operation.

Harry25

From: Fargo, ND, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

Great value and versatility

5/5

I recently purchased a 1025R and have to say I'm very impressed with what it can do. I have about three acres with much of it wooded and wanted a tractor to move dirt, clean up fallen trees, etc.. I've had it a week and already have more than 10 hours on it, and it's the middle of December. I'm not a contractor - this purchase was entirely for working my own property. Considering this is a relatively small tractor, the amount of power and versatility it delivers is amazing. I would have to say it's more than what I expected, and I'm more than pleased with the value.

Pros

  • versatility
  • agile
  • powerful
  • easy-to-use / operate

Cons

  • neighbor keeps asking to borrow it

gsaisselin

From: Hartford, CT, USA

Length of Ownership: 1week

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Love my tractor size

5/5

love my tractor size and all that I have done with it I got the 1025r filb didn't know how much you could do with it my brother-in-law has a much bigger John Deere but still calls me to do the jobs he can't get his larger tractor into and the Backhoe is great for ditches and hole digging wish I had a ripper tooth and bucket thumb will get it down the road has enough power for what I do with it I have seizures so I wanted the seat safety switch which it has so if I try to leave the seat the tractor shuts down and the hydrostats that drive the machine if I take my foot off of the pedal it comes to a stop even on a hill so the 1025r filb fits me just fine it's a little work horse the only problem I had with it is the stabilizer would leak off if the tractor was running or not so when I done the first year service the guys at John Deere shop got it replaced for me and it was under warranty work at no cost to me and that fixed the problem the guys at my local John Deere dealer want me to be happy with my purchase so they go above and beyond to make that happen I think I will get many years out of my machine and it makes my life so much easier to complete my jobs will recommend this to all of my friends

Pros

Cons

BubbaBlack

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

1025r Great Potential Poor Execution

2/5

So I will begin with that i started out with a x738. It was a great machine until the engine block was cracked at 365 hrs., and that was that. So my dealer said that the 1025r was a better more durable machine so I bought it and within the first 15hrs of use the machine had a coolant leak. So brought it back and the dealer fixed the hose fitting, because it was cracked. The next problem happened at 20 hours when I was mowing and the PTO shaft for the mower deck sheared at the u-joint. Note I was on level ground and it was brand new. Took it back to the dealer, and they fixed it in about 4 days. The next break down happened when the tractor wouldn't start. Turns out the power source to the starter wasn't connected very well and needed a new harness. At this point I was mad at the quality of the machine I spent over $27,000 on this machine and it keeps on breaking down while under warranty. The dealership is fixing it every time and thats fine. But if the machine breaks down again I might pull the plug, and trade to a 2038 or try and get a new one because this one isn't working out again. Rant Over Other wise its a great machine and the dealership is great with helping out

Pros

  • attaching implements
  • comfort items

Cons

  • quality of the machine
  • the price

BobbyADA

From: Southington, CT, USA

Length of Ownership: 3months

Usage Frequency: Daily

Level of Expertise: Intermediate

1
2
5

after looking at 7 differant brands went back to deere havent had any problems

5/5

don't look for something you wont be happy with, this does everything you will need to do

Pros

Cons

weezl

From: mascotte flordia

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

I won't be able to get away from this machine quick enough. Complete buyers remorse.

1/5

I bought the 1025R in April of 2015 and had nothing but trouble with the thing since. Got the machine home from the dealer and immediately, the mower deck would not connect properly. Dealer came out and took it to the shop for repairs. Got the machine back and again, something else went wrong. The dealership had the machine for over a month. We made our first payment and the machine was still in the shop. When we did get the machine back, it was a royal pain to get the deck to marry up with the mower.We finally did and I won't remove the mower deck again. I had the machine out yesterday, and the bracket that holds the seat in place broke. I'm not a very big guy by the way. It's been one headache after another with this machine. I wish I had never laid eyes on this thing. Do yourself a favor, don't even entertain the idea of buying a piece of trash like the 1025R. John Deere needs to recall this model.

Pros

Cons

  • does not connect as easily as advertised.

Paul2764

From: Smithville, Mo.

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

1
2
5

Tough Machine

5/5

To everyone , While waiting on my new 1025r TLB My sales girl Kylan sent me demo to start my project removing a old paver patio concrete side walks tree stumps it is amazing the power and strength this thing has easy to operate. I got my new one today and the improvements are even better. it now has the curved loader bars on the backhoe the hoes are tucked in to the frame fuel filler cap is now lined with steel threads , the back hoe has it's own seat no more swinging the seat around. GO JOHN DEER!!!!!! Could not be happier with my dealer. JD equipment in Marion OH.

Pros

Cons

ezze

From: ohio

Length of Ownership: 1week

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Very good entry level tractor

5/5

This is my second JD tractor over the past 15 years. The 2210 was my 1st and ran flawlessly for 12 years and I got a good trade in price for it. My 1025r has loader, mower and backhoe. Runs very well after 3 years of regular use. The loader and backhoe are very well made, easy to remove and install. Not a fan of where the light switch is located, I hit my knee on it all the time. A bit to much plastic instead of steel but by trucks like that now too. For the money you can't go wrong getting a 1025. It's a very good compact tractor. John Deere resale value beats everyone else if you look after it.

Pros

  • reliable

Cons

Caper

From: Nova Scotia, Canada

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

back hoe

5/5

I LOVE MY JOHN DEERE , IT IS FUN TO DRIVE AND A TOUGH ANIMAL!!! I have the heavier bucket and larger mowing deck. my next attachment will be the back hoe.

Pros

  • great tractor

Cons

  • bucket needs teeth on the front when digging

jetpilotman

From: johnscreek georgia

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Beginner

5
2
5

Pleasantly surprised

5/5

Our new 1025R was delivered this morning and I immediately began giving a serious workout using the front loader and the tiller. This tractor is all we will ever need! We love it and how simple it is to operate and the available power it renders is more than I expected!!

Pros

Cons

Levi46

From: Kansas

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Great Power and 4 wheel drive!

5/5

iv'e owned this tractor for almost a year and so far it has exceeded all my exceptations. i really fell in love with the 4 wheel drive and you can about go anywhere! the loader was also a highlight and has a lot of streigth.

Pros

Cons

  • the hydraulic hoses are difficult to attach

tractorcarl

From: Ripley, OH 45167, USA

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Our 1025R is a great work horse with plenty of power

5/5

We bought our 1025r to mow the 4 acres of rough grass which it handles with ease. We used the front loader to plow, push and lift lot's of snow this past winter and she never hesitated lifting or pushing even up a 3 degree grade. The back hoe may be small but it works just like the big ones and is very good at digging up tree roots and digging holes. Frankly, 90% of the use on our 1025r has been removing tree roots, and clearing out saplings and small trees up to 6" diameters. We've leveled and graded our grounds and moved 15 tons of decorative marble stone chips without any issues. Bottom line, we love our John Deere 1025r

Pros

Cons

PeterD

From: Connecticut

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

AN AWESOME MACHINE!!!

5/5

I bought mine in March of 2016. I have a little over 50 hours on it and it has been worth it's weight in gold. If you are thinking of getting one go get it. You will not be sorry! It is awesome!!! I use mine for mowing, hauling and working in the garden. Also, I highly recommend the 4' tiller. It's hard to believe how good of a job it does. Honestly I can't think of one negative thing about it. I would give it 10 stars if I could and I recommend it 1,000%

Pros

  • everything

Cons

  • none

Darren46

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Versatility through attachability!

5/5

Need a small tractor for a lot of different jobs? If so the JD 1025R was made to order! Mowing, digging, lifting this tractor does it all. If attachability is key to your purchase decision you'll love this machine. I now have 135 hours on my 1025R and cannot say enough good about this tractor. I mow, landscape, handle material, plow and more and this machine gets her done. In addition, to have a Yanmar diesel is to love one. You"ll be hard-pressed to find anything more fuel efficient. Just compare the ease and convenience of implement attachment to others and you'll fall in love.

Pros

Cons

OhhowIluvmyDeere

From: Lapeer, MI 48446, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Mower connection is difficlut

4/5

I have owned this tractor for 2.5 years now. Overall I love the tractor. However, the E_Z connect drive over mower is very difficult to accomplish. Trying to get everything to line up by yourself is impossible. The locking rod that holds the mower to the unit on the backside is extremely difficult to lock in place. The loader hooks up easily and so does the snow blower.

Pros

Cons

Weekendwarrior

From: Greenville, MI 48838, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

AMAZING!!

5/5

Great little work horse. I have a box blade,60in mower, fertilizer spreader and loader and use it daily. Highly recommend

Pros

Cons

Joey

From: IA

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Mighty Mouse

5/5

This little tractor is deceiving, as it is really powerful and super easy to maneuver. We purchased the loader and mower deck, and added some lights. We debated a while if we needed a 4 wheel drive vs just a mower. Really glad we went this route. More then enough power for this machine.

Pros

  • power

Cons

  • nothing yet

Dan88

From: Hedgesville, WV, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

This is one tough little tractor

5/5

I have 50 hrs on my 1025 with a front end loader and ballast box. I use it to clear heavy snow from my steep 150 ft driveway. It performs flawlessly so far. Great capacity on the loader lifting heavy snow for hrs. the ergonomics/controls are the best including the lights which give great field of vision at nite. These may seem like little things but believe me they are not.. The engine is more powerful than I anticipated even when pushed to the limits. fires up fast even in cold weather. The cadillac of sub compact Tractors. Go green

Pros

  • smooth operation
  • powerful
  • ease of operation

Cons

  • nothing yet

Canuck

From:

Length of Ownership: 1yearOrLonger

Usage Frequency:

Level of Expertise:

5
2
5

One awesome tractor

5/5

Now two weeks post adoption of my newest green family member! Solidly built, such thorough safety features I am comfortable starting training (with supervision!) of my two daughters. One tip: if you order with forward field lights (mounted to the hazard light guards) ALSO order rear field lights at same! Due to the requisite mounting point (due to folding ROPS) I find the light in my face if working at night when I turn to back up- and all behind becomes invisible! Be safe and light yourself all the way around... Looking forward to many green years ahead!

Pros

Cons

Dieseldoghouse

From: Lakeville, MA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

© COPYRIGHT 2024 LEGACY EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo

NOT SET