X394 LAWN TRACTOR 48 IN

Lawn Tractor with 48-inch Deck

48-in. Accel Deep™ Deck
Easy mulching with optional MulchControl™ Kit (one-touch or from deck versions)
4-wheel steer
Automotive-style power steering
4 year/300 hour bumper-to-bumper warranty

Starting At:7,499.00
Buy Now

View Product Brochure

Share Facebook Twitter google_plus Email

Features

Engine is smooth running and reliable V-twin air-cooled design

22-hp (16.4-kW) V-twin engine

The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design that provide superior lugging ability, even cooling, and durability.

A 22-hp (16.4-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions.

Key engine features include:

22 hp (16.4 kW)
Large 726-cc displacement
V-twin air-cooled design that provides smooth, quiet power
Quality features include:
- Cast-iron cylinder liners
- Overhead valves
- Full-pressure lubrication
- Replaceable oil filter
Dual-stage air cleaner V-twin design:
- Excellent power and performance
- Easy starts
- Smooth operation

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

15-amp capacity
Regulated to keep the battery at full charge without risk of overcharging

Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity

Fuel tank

Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
- Located on the left fender
- Helps eliminate spillage
Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.

The 48-in. (122-cm) Accel Deep™ (48A) Mower Deck cuts clean and is versatile

X394 with Accel Deep 48A Mower

Accel Deep 48A Mower

The 48-in. (122-cm) Accel Deep Deck uses the latest in three-spindle mowing technology to raise performance to a higher level:

10-gauge, 0.135-in. (3.4-mm) deck stamping for long life
Deep, flat-top deck design to handle a large volume of material at faster mowing speeds

Gives excellent cut quality and uniform discharge
Easy to keep clean on top of and under the deck

Resilient four-point mounting system suspends mower from tractor for a smooth and level cut
Wide mower wheels easily adjusted just above ground level to help prevent scalping
0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height
Onboard deck-leveling system makes keeping mower properly adjusted easy
Compatible with optional MulchControl™ mulching system
Compatible with high-performance Power Flow™ material collection systems
For use on X330, X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and model year 2016 X590 Tractors

The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:

4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
- Optional lever-action or electric one-touch MulchControl attachment provides superior mulching performance and versatility.
Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
Mower deck is suspended from the vehicle for a smooth and level cut
- Adjustable mower wheels, positioned just above ground level, help reduce scalping

Excellent cut quality

48A Mower top (similar mower from X700 Series Tractor shown)

48A Mower underside (similar mower from X700 Series Tractor shown)

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
- Helps maintain excellent cut quality at faster mowing speeds
Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.

Productivity - getting the job done fast

Right side of Accel Deep 48A Mower Deck

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:

Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
The 48A Power Flow blower has an inlet housing with over 50 percent greater area than the 48X Power Flow blower used on previous machines.

Cleanliness - for the mower and the operator

Accel Deep 48A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

There are few places to catch and hold material on top and underneath the deck.
- Top of deck stays cleaner, reducing time and effort needed for cleaning and service
- Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
- Less need to clean and remove buildup of material from underside deck
The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck:
- Limited amount of material to drift onto the operator and mower deck
- Even for material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
- Mulching prevents the discharge of material completely and the MulchControl attachment makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

Hose connector is included with the mower deck.

Superior durability is designed in

Spindle pocket with flip-up cover

Easy-to-adjust mower wheel and mower side reinforcement

The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:

Ribs in the deck shell add strength where it is needed.
The 48A has a 23 percent heavier overall weight than the Edge™ Xtra 48-in. (122-cm) mower deck used on previous machines.

Mower wheels are heavy duty:

Provides greater strength and durability for longer, trouble-free life.
Setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.

The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility - easy to change between side discharge, mulch, and bagging modes

The 48A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

With an optional MulchControl attachment installed (along with the special mulching blades), changing from side-discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
The Power Flow rear bagger can be used with the MulchControl attachment and blades installed by simply using the MulchControl lever or electric one-touch switch to move the mulch baffle to the side-discharge position.

MulchControl option

A lever-action or electric one-touch MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

A beautiful looking lawn
Grass clippings not blown onto the operator, driveways, or flower beds
Less fertilizer use
Elimination of the effort needed to dispose of clippings

How MulchControl works

MulchControl baffle open

MulchControl baffle closed

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl handle

Electric one-touch MulchControl switch

For the lever-action MulchControl attachment, a handle on top of the mower deck is used to engage or disengage mulch mode.
- The operator is required to get off of the tractor in order to engage or disengage mulch mode with the lever-action system.
For the electric one-touch MulchControl attachment, a switch on the tractor dash is used to engage or disengage mulch mode.
Changing from mulch mode to side discharge mode or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

Usually mulch, but side discharge when grass gets too long
Usually side-discharge, but would like to be able to close the chute to control clippings
Always mulch a main lawn, but often side discharge secondary lawns
Bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when needed.

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn clean-up is desired

7-bu (247-L) Power Flow rear bagger

Optional rear bagger

Power Flow blower

An optional 7-bu (247-L) rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:

The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:
- 7-bu (247-L) capacity
- Easy-to-attach Power Flow blower (ordered separately)
- Easy-to-attach chute (ordered separately)
- Air exhaust duct
- Convenient spring-latch
- Airflow fill indicator
- Quik-Tatch mounting
- Sealed hopper top
- Loose-knit bags available

Larger 14-bu (493-L) and 19-bu (670-L) MCS are available, in addition to the 7-bu (247-L) MCS, for specific X300 and X500 Series Tractor models.

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

The warranty is hassle free, with one company handling all of the paperwork.
Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Four-wheel power steering gives superior maneuverability and trimming ability

Four-wheel steering versus two-wheel steering

Four-wheel steer maneuverability

NOTE: In the schematic above, the solid line refers to a four-wheel steer tractor, and the hashed line refers to a two-wheel steer tractor.

Four-wheel steering provides very significant maneuverability and trimming advantages over that of two-wheel-steering-equipped tractors.

For example, with the X394 Select Series™ Tractor equipped with a 48-in. (122-cm) Accel Deep™ Mower (the following numbers correspond to the schematic above):

Uncut circle radius is reduced from 24 in. (61 cm) for a two-wheel steer X390 to only 15 in. (38 cm) with an X394, eliminating or greatly reducing the need to back up when trimming around trees, shrubs, etc.
Interference from the mower and tractor wheels is eliminated because they are several inches away from the object being trimmed around.
Outside turning circle is reduced, reducing the time spent turning and increasing mowing efficiency.

Also, trimming inside curves around flower beds or other landscaping can be done more completely with a four-wheel steer tractor.

Designed for tight turns

The four-wheel steering system is designed for tight turns, leading to greater mowing efficiency:

Caster, camber, and kingpin angles are optimized to reduce effort, especially when going from straight ahead into a turn.
Steering geometry has been designed with the use of 3-D modeling, so all four tires are working together.
Sealed ball bearings are used on the torque shaft and the rear spindles to reduce friction.
Small scrub radius, less than 1 in. (2.5 cm) in the rear, reduces scuffing and bump-steer.

Designed for easy steering

Four-wheel manual steer illustration shown

Sealed ball bearings are used at critical all-wheel-steer joints for reduced friction, longer life, and less maintenance.

Easy steering is important for an enjoyable mowing experience:

Larger, 14-in. (35.6-cm) diameter steering wheel gives improved leverage for easier turns.
Ball-joints on both ends of the steering tie rods reduce wear to maintain accurate steering.
Greaseable front steering spindles reduce friction and improve wear over time.

Power steering enables easy turns

Power steering cylinder

Hydraulic power steering is standard equipment:

Provides effortless, automotive-like control
Reduces operator fatigue and increases productivity
Enables a tight turning radius for great maneuverability
Adjustable-tilt steering wheel for optimum operator comfort (X390 and X394 Tractor)

Lever-action or electric one-touch MulchControl™ options are available for extra mowing convenience

Lever-action MulchContol lever

Electric one-touch MulchControl switch

Lever-action or electric one-touch MulchControl attachment is available for Accel Deep™ 42-in. (107-cm) (42A), 48-in. (122-cm) (48A), and 54-in. (137-cm) (54A) Mower Decks used on X300 and X500 Select Series™ Tractors.

MulchControl advantages and benefits

MulchControl enhances versatility and productivity. A mower deck equipped with MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted from side discharging to mulching or vice versa:

In mulch mode, it controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.).
Reduces cleanup time needed to dispose of clippings.
Reduces the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material due to the additional baffles under the mower deck and the unique design of the mulching blades.

Electric MulchControl has the additional advantage of being controlled from the tractor seat by a switch on the dash to operate an electric actuator that moves the baffle to close off the discharge area of the mower deck.

Electric one-touch MulchControl switch

Electric one-touch MulchControl actuator

Operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require.

When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
When a breeze might blow clippings back onto the operator
For side discharge mowing only the areas of the property where grass is too thick for mulching
With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching

With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
Models equipped with a 42A Mower Deck require a MulchControl baffle be removed to install the bagger chute; see 42A Mower Deck versatility explanation for more information.

Changing from one mode to the other takes only a few seconds.

How MulchControl works

A mower equipped with a MulchControl attachment delivers unprecedented levels of productivity and versatility. The operator has the ability to quickly change between side discharging and mulching. A heavy-duty baffle opens and closes to convert the mower from side discharge mode to mulch mode or vice versa.

MulchControl baffle open (similar mower deck shown)

MulchControl baffle closed (similar mower deck shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl attachment includes baffles to control the flow of material under the deck.
When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

For operators who usually mulch, but side discharge when grass gets too long
For operators who usually side discharge, but would like to be able to close the chute to control clippings in some areas
For operators who always mulch a main lawn, but often side discharge secondary lawns
For operators who collect clippings, but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging when desired.

Advantages of MulchControl include:

Performance is improved.
- Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
- Clippings are much smaller, which allows them to fall into the grass and be removed from view.
- Unsightly grass clippings are not blown onto driveways or into flower beds.
- Fertilizer use is reduced and provides associated environmental benefits.
Uptime is increased.
- Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
- Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall or thick to mulch effectively.
Cost of operation is reduced.
- Controlling clipping dispersion reduces cleanup time.

MulchControl limitations

While in the side discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn cleanup is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

MulchControl compatibility

Each MulchControl attachment includes everything needed: baffles and mulch blades for all attachments, and the actuator, wiring, and switches for the electric one-touch attachments.

Lever-action MulchControl attachments

Attachment number	Description	Applications
BM24794	42A MulchControl (lever action)	X300 Series Tractors, Z300 Series ZTrak™ Mowers
BM24993	48A MulchControl (lever action)	X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BM24994	54A MulchControl (lever action)	X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers

Electric one-touch MulchControl attachments

Attachment number	Description	Applications
BUC10164	42A electric one-touch MulchControl	X300 Series Tractors*
BUC10165	48A electric one-touch MulchControl	X300 and X500 Series Tractors*
BUC10166	54A electric one-touch MulchControl	X300 and X500 Series Tractors*

* NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Snow removal is a strength of lawn tractors

44-in. (112-cm) Front Blade

Snow blower, weather enclosure, and chains on an X300 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

44-in. (112-cm) Snow Blower
44-in. (112-cm) Front Blade
48-in. (122-cm) Front Blade (X394 Tractor only)
Tire chains or TerraGrip traction belts
Weather enclosure (available for all X300 Series, except the X350R)
Weights

Integrated hydrostatic transaxle efficiently transmits power to wheels

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)

Kanzaki K58 transaxle (X380, X384, X390, X394)

The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.

Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

Use of the latest valve designs has significantly reduced the sound level.
Large pump and motor rotating groups ensure long life and efficient operation.

Freewheeling valve

A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.

Power steering and hydraulic lift enable easy operation

Power steering cylinder

Tilt steering lever (X390 and X394 only)

Hydraulic power steering is standard equipment:

Provides effortless, automotive-like control
Reduces operator fatigue and increases productivity
Enables a tight turning radius for great maneuverability
Adjustable-tilt steering wheel for optimum operator comfort (X390 and X394 Tractor)

Hydraulic lift system is easy to operate

Hydraulic lift

The hydraulic lift control lever is positioned on the dash near the steering wheel for quick, easy, and precise fingertip control of equipment. Implement float, which allows an implement to follow the ground contour, is built into the lift linkage.

Controls are convenient and easy to find

Convenient operator station

Separate throttle and choke controls

The contoured dash has clean, attractive styling and ergonomic controls for easy use:

Controls are color coded for easy identification by the operator.
Controls are logically placed and easy to reach.
The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
The reverse implement option (RIO) switch is a yellow button.
The hydraulic-lift control and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.

The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.

Functional design of the throttle and choke controls provides good appearance and a comfortable feel.

Easy-to-use key switch and controls

Tilt steering lever (X390 and X394 only)

The hydraulic-lift control and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
- The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
Functional design of the throttle and choke controls provides good appearance and a comfortable feel.
Power steering takes the work out of turns.
Tilt steering wheel adjusts for operator comfort (X390, X394).

Display panel

Display panel illustration with descriptions

Display panel

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

Display features dark-cockpit design to minimize operator distractions.
Display is back lit for night visibility.
- Night visibility is especially useful with snow blower use.
Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
Electronic fuel gauge provides real-time fuel level information.
A tachometer graphically displays engine speed.
- Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
An indicator tells the operator when the PTO is operating.
Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
- Damage can be prevented and repair costs reduced by addressing problems early.
Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
- The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
Operators are advised if battery voltage is low, normal, or excessive.
The service indicator light illuminates to indicate a diagnostic error code is stored.
- Onboard diagnostics provides trouble codes for use by trained technicians.
  - For example, a technician will be able to test switch functionality and circuit continuity without tools.

Twin Touch™ foot control

Twin Touch foot control

Cruise control

Twin Touch foot pedals control the speed and direction of travel:

Automotive-type accelerator control ensures easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Cruise control

Cruise control is standard equipment:

To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

Conveniently-located deck height adjustment knob

Mower cut-height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

Provides mower cut heights in 0.25-in. (6.4-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
Returns the mower deck to the same preset height each time it is lowered

Storage tray under tractor seat

Exact Adjust tool used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat.

Exact Adjust ports allow for easy and accurate leveling of the mower deck for optimum mowing performance.

Deck-leveling gauge placed under deck

Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.

Parking brake control

Parking brake

Depressing the brake pedal applies internal wet-disk brakes (increased durability and longer life) for safe stopping.

A parking brake control is conveniently located for easy access; it holds the brake pedal securely in locked position.

Electric power take-off (PTO) clutch is easy and convenient to use

Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch

PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

Reverse implement option (RIO)

Reverse implement switch

Mower engagement power take-off (PTO) switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

Carefully check the area around the machine.
Disengage the mower before backing up.

NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

Stop forward travel. Allow attachment to run.
Look down and behind the machine to be sure that there are no bystanders.
Push and hold in the reverse implement switch while depressing the reverse pedal slightly.
NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
Resume forward travel. The attachment should continue operating.
Repeat procedure to position the machine again.

Frame is reliable heavy-duty welded steel

Welded, heavy-duty frame

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.
- Weight bracket is built into the frame of two-wheel-steer models.
- Four-wheel-steer models require the optional weight bracket.

Front axle and wheel spindles are heavy-duty

Cast-iron front axle

Front axle is made of nodular cast iron:

Cast-iron front axle is strong and shock-resistant.
Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

The bushing provides excellent wear resistance.
Grease fittings at each spindle are easy to service.

Front steering spindles

Steering spindle

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

Have strength to handle heavy implements
Provide long life at bearing surfaces
Use sealed precision bearings in front wheels

Rear equipment-mounting system is heavy-duty and easy to use

Rear equipment mounting system

A heavy-duty equipment mounting system is used:

Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment.
Easily attach optional equipment to the tractor
Can bear the load of heavy rear-mounted equipment, such as material collection systems

Modern styling with functional design enhances appearance and performance

Attractive styling

Hood air-intake louvers

Smooth, rounded contours present a modern, styled appearance:

Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.
- Cooler engine operation
- Lower operator station sound levels
Hot air is vented out the front grille, away from the operator.
The fully enclosed hood is made of molded-in-color material.
- Reduces sound
- Will not rust or dent
Distinctive grille and large, one-piece fender deck complete the styling package.

Two high-quality headlights give excellent visibility

Optimum lighting pattern

Headlights are standard equipment on all models:

Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
A headlight position on the ignition switch makes it easy to operate the headlights.
The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Operator station is comfortable and convenient

Operator station

The operator station is designed for operator comfort and ease of using controls:

A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
Full-length foot mats provide comfort for the operator and protect the footrest area.

Comfortable seat

Comfortable open-back seat

An open-back 15-in. (38-cm) high-back seat provides a comfortable, smooth ride and good support for the operator:

Seat travel of 7 in. (18 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls.
Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
Open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride.
Grasp at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.

Seat suspension

The seat suspension is adjustable, without tools, for the weight of the operator:

Springs are adjustable fore and aft to any of three positions.
- No tools require
- Allows fine-tuning of the suspension for the operator's weight
- Back position for more support for heavier operators
Tool tray is designed into the seat base.
- Can be used to store gloves, small tools, etc.
- Provides storage location for Exact Adjust tool and deck-leveling gauge (tool and depth-leveling gauge not shown in photo)

Cup holder

Cup holder and tool tray on fender

A cup holder and tool tray are located on the fender for operator convenience:

The cup holder holds a variety of container sizes.
Tool tray provides convenient storage.
Cup holder and tool tray are constructed of durable acrylonitrile butadiene styrene (ABS) plastic.

Removable plug for optional 12-V outlet

Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

Convenient for plugging in cell phone charger and other electric devices
- Can be used to operate electric rear equipment, such as a sprayer or spreader

12-V fast connector

Illustration of fast connector location

A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:

The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

Serviceability is convenient with easy-open hood

One-piece hood is easy to open

Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

Important service points are located within easy reach.
A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
- The high-quality engine used in the X300 Series does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.

Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy

Deck-leveling gauge and hex adjusting tool stored under tractor seat

Exact Adjust access holes

A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.

Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

There is no need to reach under the fender deck while making the mower-level adjustment.
Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
- Level the mower deck side to side
- Set the correct amount of rake (front-to-back deck orientation)
- Calibrate the cutting height to the cut-height adjusting knob setting
Exact Adjust simplifies leveling the mower deck if equipped with a Power Flow™ blower.
- To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.

Deck-leveling tool placed under deck

Using included ball-hex tool to level mower deck

Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

Park the tractor on a level surface.
Inflate tires to the correct pressure.
Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.

Cut height adjusting knob

Set mower cutting-height knob to the correct deck-leveling position.
- For X300 models, use position 2.75
- For all other models, use position 2.5
Adjust mower wheels as necessary so they do not contact the ground surface.
Remove the onboard deck-leveling gauge that is located under the seat.
Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points will vary slightly between decks.
- Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
Adjust mower deck front-to-back level, if necessary.
- Loosen rear nuts equally on each side of front lift rod.
- Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
- Tighten rear nuts after adjustment is complete.
Return the gauge to its storage position.

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

The MowerPlus™ app helps maintain the tractor and lawn

MowerPlus app screen

MowerPlus app maintenance screen

Keep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

Look for the MowerPlus app on the mobile device’s app store.

The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

NOTE: Some product image variation may exist.

Also available is the John Deere MowerPlus smart connector (sold separately).

Smart connector

The John Deere MowerPlus smart connector wirelessly links a Select Series™ X300 or X500 Tractor to the MowerPlus app on a mobile device. The smart connector transmits engine usage to the app, making it easy to track maintenance intervals. It also transmits the fuel level to the app—when thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.

Specifications

Compare the specifications of up to 4 models

Key Specs	x394-lawn-tractor-48-in Current Model
Engine power	22 hp 16.4 kW
Engine manufacturer/model	FS651V
Transaxle type	K58 hydrostatic integrated with transaxle
Transaxle control	Twin Touch™ pedals
Rear tires	22x9.5-12
Steering type	Power, hydraulic
Lift system type	Hydraulic
Cutting width	Accel Deep™ mower deck, 48 in. 122 cm
U.S. warranty	4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power	22 hp 16.4 kW
Displacement	44.3 cu in. 726 cc
Manufacturer/model	FS651V
Type	Overhead valve, full-pressure lube, oil filter
Cylinders	V-twin, cast-iron liners
Governor	Mechanical
Choke/speed control	Separate levers, automatic choke return
Cooling method	Air
Air cleaner	Dry, replaceable with foam precleaner
Oil drain	No tools
Fuel system
Type	Gasoline
Fuel delivery	Pulse pump, carburetor
Fuel gauge	Gauge on dash
Fuel tank location	Rear
Fuel fill opening	On left fender, 3 in. 7.6 cm
Fuel tank capacity	3.3 U.S. gal. 12.5 L
Electrical system
Battery	12 V 340 CCA
Charging system	Flywheel alternator, regulated, 15 amp
Engine starter	Bendix
Hourmeter	Yes
Headlights	Two standard, incandescent, 27 W
Taillights or reflector	No
Backup lights	No
Rear work lights	No
12-V outlet	Optional
Transaxle
Type	K58 hydrostatic integrated with transaxle
Control	Twin Touch™ pedals
Cruise control	Yes, button on dash
Oil cooler	Fins and fan on transaxle
Oil filter	Internal, not replaceable
Differential lock	No
Forward speed	0-6.2 mph 0-10 km/h
Reverse speed	0-3.5 mph 0-5.6 km/h
Brakes	Internal wet disc
Chassis
Frame	Welded heavy-duty
Primer/paint	E-coat/powder
Weight bracket	Optional front and rear
Receiver hitch	No
Front axle	Cast iron front axle, front wheel ball bearings
Spindle bushings	Metal, replaceable
Front tires	15x6.5-8
Rear tires	22x9.5-12
Hood material	Molded-in color hood material reduces sound, will not rust or dent
Fender deck material	Stamped steel
Floor mats	Sure-grip rubber
Storage	On fender and under seat
Service interval decal	Yes
Fender handles/grips	No
Cup holder	Yes
Equipment mounting	Yes, heavy duty
Steering
Type	Power, hydraulic
Four-wheel steer	Yes
Steering wheel	Large, 14 in. 35.6 cm
Tilt steering wheel	Standard, five position
Turning radius	19 in. 48.3 cm
Uncut circle radius	15 in. 38 cm
Seat
Type	Open-back design with grasp
Seat back height	15 in. 38.1 cm
Armrests	No
Fore-aft adjustment	While seated, slide rail, 14-position, 7 in. 17.8 cm
Seat suspension	Tilt, two coil springs, three-position no-tools adjustment for operator weight
Lift system
Type	Hydraulic
Hydraulic outlets	No
Mower cut height	13 positions, 1-4 in. 2.5-10.2 cm
Cut height increments	0.25 in. 0.64 cm
Preset cut height	Yes
Mower deck
Type	Side discharge
Cutting width	Accel Deep™ mower deck, 48 in. 122 cm
Construction	Stamped steel deck shell
Mower deck material	10 gauge 0.135 in. 3.4 mm
Mower wash port	Yes
Mower drive system	Electric power take-off (PTO) clutch, in-line belt
Mower wheels	Four
Mower wheel adjustment	Seven-position, spring-loaded pin
Mower level adjustment	Exact Adjust ports and onboard deck-leveling gauge
Mower attachability
Type	Roll under tractor
Front draft arms	Attached with spring pins at two points
Rear draft arms	Quick-pull pins
Mower wheels rotate	Yes, 90 degrees for easy mower removal
Drive system	Dual belt
Safety
Meets ANSI standard	Yes
Meets OPEI standard	Yes
Backup protection	Reverse Implement Option (RIO)
Safety video	Yes
Buyer's notes
Notes	One-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dent 4-wheel steering for unmatched maneuverability and trimming capability Power steering with tilt steering wheel for exceptional maneuverability and comfort Hydraulic power lift for superior convenience and ease of use
Warranty	4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers	48A (standard)
Rear bagger	7, 19 bu 247, 670 L
Powered material collection	Power Flow™ blower
Mulching system	Yes, MulchControl™
Front thatcher	38, 46, 54 in. 96.5, 116.8, 137.2 cm
Front blade	44 in. 111.8 cm
Mid-mount blade
Snow blower	Two-stage, 44 in. 111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
Sprayer	Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L Mounted, 25 U.S. gal.
Spreader	Tow-behind, 125 lb 57.7 kg Tow-behind, 175 lb 79.4 kg Mounted, 125 lb
Front bumper	Styled bumper option
Brush guard	Yes
Weather protection	Weather enclosure
Sun canopy	Yes
Rear receiver hitch
Bucket holder	Yes, double bucket
Grass striping	Lawn striping kit
Tractor shovel	40 in. 101.6 cm
Front loader
Other equipment
Tow-behind tools	16
Dimensions
Height	47 in. 120 cm
Overall length	74 in. 188 cm
Wheelbase	51.2 in. 130 cm
Width with mower	62.5 in. 159 cm
Width with mower (deflector raised for storage)	53.6 in. 136 cm
Width without mower	45 in. 114 cm
Weight	Mower, no fuel, 755 lb 342 kg

Accessories and Attachments

Carts

Utility Cart, 7P Poly - LP21935

7P Poly Utility Cart

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

7P Poly Utility Cart

The cart has a premium molded, high-density polyethylene box construction.
Compression molding process allows polyethylene to be the optimum thickness in all areas for superior strength and durability.
Polyethylene body will not rust or dent; it stays looking new longer.
0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
Styling is compatible with other John Deere equipment.
Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

Wheels

7P Utility Cart wheel

Wheels are mounted on a solid, one-piece axle for durability.

Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

Good flotation
Minimal rolling resistance
Shock absorption

Sloped tailgate

Sloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

Spring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 8Y Convertible Poly - LP22755

8Y Convertible Poly Utility Cart, push mode

8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m³), 300-lb (136-kg) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

Compatible with riding lawn tractors and garden tractors
Durable poly construction
All-terrain pneumatic tires
Converts from tow cart to push cart without tools
Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 10P Poly - LPPCT10JD

10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

Large 650-lb (295-kg) capacity
10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
Will not dent or rust
15x6 tubeless pneumatic tires with turf tread for maximum traction
Easy, hands-free foot pedal dump release
Steep dump angle for complete emptying

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 13 Steel - LPHDC13JD

13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Welded box

Welded box construction provides maximum reliability:

Requires less setup time than the bolted construction.
Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.

Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

Good flotation
Minimal rolling resistance
Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch

Spring-pin tractor hitch

Tilt-dump latch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

Steep dump angle makes emptying easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 16YS Swivel Poly - LP68186

16YS Swivel Cart

The 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Key features include:

Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
800-lb (363-kg) capacity makes it durable enough for the heavy jobs
- 350 lb (158 kg) when using swivel feature to dump
Convenient foot pedal release for easy dumping
Molded stake pockets for enlarging the bed size

NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

16YS Swivel Cart

Order number: LP68186

Oilite is a trademark of Beemer Precision Incorporated.

Utility Cart, 17P Poly - LPPCT17JD

17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Key features of the 17P Utility Cart:

1,000-lb (454-kg), 17-cu ft (0.48-m³) load capacity.
Cart has premium molded polypropylene box construction.
Polypropylene body will not rust or dent, staying new-looking longer.
0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
Styling is compatible with other John Deere equipment.
16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
Wheels are mounted on a solid one-piece axle.
Wheels turn on iron/Oilite® bushings with grease fitting for long life.
Spring-loaded dump latch is easy to use.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

Utility Cart, 18 Steel - LPHDC18JD

18 Utility Cart

Everyone who owns a John Deere riding lawn and garden product is a potential user of a high-quality affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Durable box design

Bolt-together box

Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together.

Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart.

Convenient emptying of box

Tailgate

The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

18 Steel Utility Cart
Order number: LPHDC18JD

Oilite is a trademark of Beemer Precision, Incorporated.

Drawbar

48mm (1 7/8-in.) hitch ball for ball-type hitch. Ball Mount sold separately. - PM05101

1-7/8-in. (48-mm) hitch ball

1-7/8-in. (48-mm) hitch ball attaches to drawbar or rear hitch to allow towing. 0.75-in. (19-mm) diameter post thread is provided.

The hitch ball is available through Parts.

Magnetic hitch pin - LP63768

Magnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

Strong magnetic grip
Rust resistant
Easy to install, secure fit

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Home Maintenance Kits

Home maintenance kit - LG265

LG265 home maintenance kit

Typical home maintenance kit

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

The LG265 home maintenance kit includes the following:

Quantity	Description
1	Engine oil filter
2	Engine oil quart
1	Fuel filter
1	Air filter element
1	Air filter element foam
2	Spark plug

Mcs Chutes

Power Flow chute (6.5/7 bu) - BM21681

Power Flow chute and blower

Hopper, chute, and blower

The Power Flow chute is required, along with the high-performance Power Flow blower, to use the 2-bag Power Flow material collection system. The chute includes a convenient handle and a fill indicator that tells the operator when the bags are getting full.

One chute works with several vehicle applications. Trim lines on the chute are referenced in the instructions so the chute can be cut to the proper length for the vehicle/mower application.

Power Flow chute (MC519 with C, X, or A Series Blowers) - BM20855

Power Flow chute for MC519 Cart MCS

The Power Flow chute is required, along with the high-performance Power Flow blower, to use the MC519 Cart MCS.

Mcs Hoppers

7-bu (247-L) 2-Bag Hopper Assembly (X300/X500 M-T) - BM21679

7-bu (247-L) hopper (cut-and-throw)

7-bu (247-L) hopper (Power Flow™)

The 7-bu (247-L) hopper provides an efficient means of collecting grass clippings and leaves using either the cut-and-throw rear bagger or the Power Flow material collection system (MCS):

38-in. (97-cm) and 42-in. (107-cm) mower decks use the cut-and-throw system.
48-in. (122-cm) and 54-in. (137-cm) mower decks use the Power Flow system.

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags.

The 7-bu (247-L) MCS features:

7-bu (247-L) capacity
Easy-to-attach lower chute (ordered separately)
Handle on chute
Air exhaust duct
Convenient spring-latch
Airflow fill indicator
Quik-Tatch mounting
Sealed hopper top
Loose-knit bags available

Loose knit bag (1) for 7-bu Hopper - AM135486

Loose-knit bags

Close-up view of loose-knit bag material

A loose-knit bag is available as an option for use with 7-bu (247-L) cut-n-throw rear baggers and Power Flow™ baggers:

Two loose-knit bags are required.
The loose-knit bag allows more air to flow through and provide more complete bag filling in wet and heavy grass conditions.

MC519 Material Collection System - LP49228

MC519 Cart with Power Flow™ blower and chute

MC519 Cart

The MC519 is compatible with Select Series™ X320, X324, X340, X360, X380, X384, X390, X394, X500 Series Multi-Terrain, X700 Series Tractors, GT200, GX300, X400, and X500 Heavy-Duty Garden Tractors, and 110 through 455 Garden Tractors.

NOTE: MC519 is not compatible with D100 Series, LA100 Series, L100 Series, 100 Series, or Select Series model X300, X304, X310, X330, X350, X354, X370 Tractors, LT, LX, or SST Lawn Tractors, or G100 or G110 Garden Tractors.

The MC519 is designed to provide the versatility of two products in one - a utility cart or a material collector.

Utility cart:

7.5 cu ft (212 L) heaped or 500 lb (227 kg) of capacity
Ideal for hauling topsoil, gravel, sand, firewood, mulch, etc.

Collector:

Large, 19-bu (23-cu ft, 670-L) capacity with a standard equipment cover
Can be equipped with a Power Flow blower and chute for vacuuming grass clippings, thatch, pine needles, and leaves

Potential customers include homeowners, commercial operators, nurseries, and estates.

Easy to hook up and operate

MC519 hitch

The MC519 hitch can be connected to the tractor without tools in about one minute.

In combination with non-jackknifing caster wheels, this semi-rigid hitch makes it easy to maneuver the cart/collector.

An easy-to-reach handle allows dumping the cart/collector from the tractor seat.

For dumping extra-heavy loads, the operator can use the hand grip on the front of the box.

Standard equipment cover

A standard equipment cover can be installed in a matter of seconds to convert the utility cart to a collector:

Large plastic window in the cover allows the operator to see when the collector is full.
Cover folds flat for space-saving wall storage.

Strong construction

MC519 Cart Bagger

The MC519 has the durability to handle homeowner or commercial applications:

Steel support structure is mig-welded for strength.
Cart box is made of strong, 18-gauge, 0.05-in. (1.2-mm) steel for durability.
Puncture-resistant 4-ply rated (PR) turf tires are standard equipment.
Greaseable bearings (wheels and casters) enable long life.
Cover is made of tough 14-oz (397-g) black vinyl-coated nylon. The lower sides are made of 9.5-oz (269-g) black polyester knitted cloth.

Power Flow™ option (Power Flow blower and discharge chute must be ordered separately)

Power Flow blower and discharge chute options

When equipped with the optional blower and discharge chute (ordered separately), the MC519 becomes a material collection system.

The blower housing material is high-density polyethylene and the fan material is ultra-high molecular weight polyethylene:

Lightweight for easy handling and minimal effect on mowing smoothness
Will not rust or corrode
Resists wear and abrasion caused by sand
Contoured design for clean appearance and smooth grass flow

Specifications

Capacity
Collector
Volume	19 bu (670 L) or 23 cu ft (0.67 m³)
Load	500 lb (226.8 kg)
Cart
Volume	7.5 cu ft (0.21 m³) heaped; 6 cu ft (0.17 m³) struck
Load	500 lb (226.8 kg)
Box dimensions
Width	42 in. (107 cm)
Length	30 in. (76 cm)
Depth	8 in. (20 cm)
Overall dimensions, including hitch
Width	45.5 in. (116 cm)
Length	51 in. (129.5 cm)
Depth	44 in. (112 cm)
Clearance	10 in. (25 cm)
Dump angle	50 degrees
Weight, shipping (with carton)	176 lb (80 kg)
Weight, net
Cart only	119 lb (54 kg)
Cover only	26 lb (12 kg)
Hitch only	7.7 lb (3.47 kg)
Power Flow™ dimensions
Fan diameter	13 in. (334 mm)
Fan width	2.75 in. (70 mm), 3.75 in. (95 mm) for C Series Blowers
Fan blades	4, 5 for C Series Blowers
Fan speed	3400 (will vary with mower width)
Tires	4.10x3.50 4PR
Bearings
Wheel	Iron/Oilite™ with grease fittings
Caster	Roller ball with urethane seals and grease fittings
Box material	18-gauge, 0.05-in. (1.2-mm) steel
Cover material	14-oz (0.4-kg) black vinyl-coated nylon top, front, and upper side flaps 9.5-oz (0.27-kg) black polyester knitted cloth lower sides 0.397-sq yd (0.33-m²) knitted polyester netting

Oilite is a trademark of Beemer Precision Incorporated.

Tractor compatibility and requirements

The MC519 Cart is compatible with the following tractors with 48A and 54A Accel Deep™ Decks, 38, 46, 48, 48C Convertible, 48 Edge™ Xtra Deck, 50-, 54-, 54C Convertible, 54 Edge Xtra Deck, 60, 60-in. (152-cm) 7-Iron™, 62C Convertible, 62 Edge Xtra Deck, or 54-in. (137-cm), or 60-in. (152-cm) High-Capacity (HC) mowers:

110 and 112 Tractors (SN 100,000 and above)
200, 210, 212, 214 and 216, GT242, GT262, GT275, GT225, GT235, GT235E, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX255, GX325, GX335, GX345, and GX355 Tractors
Select Series™ X320, X324, X340, X360, X380, X384, X390, and X394 Tractors
X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
316, 318, 322, and 332 Tractors
NOT compatible with 100, L100, LA100, D100, LT, LX, X300, X304, X310, X330, X350, X354, X370, or SST Series Lawn Tractors or G100 or G110 Garden Tractor
NOT compatible with 316-332, 325-355D, GX325-GX355 Series Tractors with a 38-in. (97-cm) mower and blower assembly or 38-in. (97-cm) QT blower assembly
420 and 430
425, 445, and 455
X465, X475, X485, X495, X575, X585, and X595 Heavy-Duty Garden Tractors (HDGT's)
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
NOT compatible with tractors (X400/X500 HDGT's or X700 Tractors) that have the 3-point hitch or 540 power take-off (PTO) shift arm attached
325/345 with 38-in. (97-cm) mower and Power Flow system requires M118053 arm

Requirements and/or recommendations:

1. Four 200 lb (91 kg) cast-iron rear wheel weights are recommended for ballast on GT242, GT262, GT275, GT225, GT235, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX325, GX335, GX345, GX355, X500, X520, X534, and X540 Tractors when operating on slopes. Select Series X320, X324, X340, X360, X380, X384, X390, and X394 Tractors may need ballast to increase traction, stability, or steering, especially when operating on hillsides or if carrying heavier materials in the MC519 Cart.
2. 420 and 430 Tractors require one AM118915 60-in. (152-cm) Power Flow installation kit for mounting 60-in. (152-cm) Power Flow blower.
3. 316, 318, 322, 330, 332, 420, 430 require black hitch mounting bracket M115521.

Required on MC519 (S/N 045001 - ) to mount on the following Tractors:

316, 318, 322, 330, 332, 420, and 430
425 Two Wheel Steer (- A040774) without 3-Point Hitch
425 All Wheel Steer (- B040203) without 3-Point Hitch
445 (- C040542) without 3-Point Hitch
455 Two Wheel Steer (- C040507) without 3-Point Hitch
455 All Wheel Steer (- D040074) without 3-Point Hitch

This bracket was included in older MC519's but was eliminated when the 425, 445 and 455 Tractors hitch design was changed and the bracket was no longer required for hookup.

4. GT, 300 and GX 48C Mowers built before April 2002 may need 0.5-in. (13-mm) hole drilled in mower wheel bracket for installing BM20667 or BM21495 48C HP Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.

5. GT, 300 and GX 48C Mowers built after April 2002 may need slot added to mower wheel bracket for installing BM19439 and BM20523 QT Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.

6. X400/X500 HDGT's and X700 Ultimate Tractors require LP52039 Adaptor Kit for MC519 Cart, available from Order Zone.

7. X400/X500 HDGT's and X700 Ultimate Tractors with a 48C/48X Mower require BM20976 or BM22798 48 HP Adapter Kit to install BM20667 48C High-Performance Power Flow Blower Assembly to accommodate this mower's rotateable wheels:

One BM20976 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48C or 48X Mower Deck (SN -050588) with wheels that rotate.
One BM22798 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48X Mower Deck (SN 050589- ) with wheels that rotate.

8. The following older 425, 445, and 455 Tractors without a 3-point hitch also require black hitch mounting bracket M115521:

425 two-wheel steer (A040774 and below)
425 all-wheel steer (B040203 and below)
445 (C040507 and below)
455 two-wheel steer (C040507 and below)
455 all-wheel steer (D040074 and below)

9. BM20668 54C and BM20669 62C HP Power Flow Blowers require one AM133822 Mower Wheel Adjustment Pin for installation on 2004 and later 54C or 62C Mowers.

NOTE: In order to be used as a material collection system, an optional Power Flow blower and discharge chute must be ordered in addition to the LP49228 MC519 Material Collection System.

Ordering information

Customers, please contact a local John Deere dealer for availability and pricing information.

MC519 Material Collection System
Order number: LP49228

MCS 7 Dump-from-Seat Hopper, X300 with 7-bu (247-L) Hopper - LP47168

Dump from the seat capability for X300 Series Tractors

MCS 7

The MCS 7 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere X300 Series Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere MCS, installation is a breeze with simple hand tools.

Features:

Lightweight aluminum construction
Designed for full material expulsion
Easy access self-latching spring tripped handle
Ships almost fully assembled (5 minute handle assembly)
Installs in seconds (after initial assembly)

Benefits:

Easy - Convenient Access to dump handle directly from seat
Clean - No material handling, no mess
Efficient - Unload and go without leaving the seat

NOTE: Fits John Deere X300 Series 2-bag material collection systems. Not compatible with EZtrak Zero-Turn Mowers or the X300R Rear Discharge Tractor.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

MCS 7 attachment
Order number: LP47168

Mcs Power Flow Blowers

48A High-Performance Power Flow blower (X300/X500 M-T) - BG20748

HP Power Flow blower assembly

The high-performance (HP) Power Flow blower assembly for the 48-in. (122-cm) Accel Deep™ Mower is used with the hopper and chute to provide a very effective material collection system. A hopper and chute must be ordered separately to complete this material collection system.

Miscellaneous

12-V outlet kit (X300) - BM24915

12-V outlet

The 12-V outlet kit can be installed on the tractor to provide power for various 12-V equipment.

40-in. (102-cm) Tractor Shovel - LP63767

Tractor shovel in raised position

Tractor shovel in emptying position

The 40-in. (102-cm) Tractor Shovel expands the usefulness of any John Deere Select Series^TM X300 or X500 Multi-Terrain Tractor by allowing it to pick up and move material. It utilizes a high-capacity electric actuator that provides lift, lower, dump, and down force functions. No front blade is required.

The tractor shovel takes the back-breaking labor out of jobs like moving mulch, spreading gravel, ground grading, and more. It installs using the tractor's existing frame holes. After initial installation, it can be removed or installed without tools.

The innovative opening design of the tractor shovel, combined with the lift height, assures complete emptying of material. The tractor shovel can also be used for scraping and grading by locking the shovel in the raised position.

Tractor recommendations and requirements:

Rear tractor ballast recommended for improved traction
Tire chains recommended for moving snow
No tractor requirements

Key features:

Can be used when upper part of shovel is locked in the raised position as a blade (without angling capability)
Raised and lowered with electric actuator
Provides down force to increase scraping effectiveness of blade
Pick-up, transport, and empty a variety of loose material including soil, gravel, mulch, and snow
Can be removed in 10 minutes or less

Compatibility:

LP63767 40-in. (102-cm) Tractor Shovel is Compatible with:

Select Series X300, X300R, X304, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Unique shovel design

40-in. (102-cm) Tractor Shovel (with optional brush guard)

Shovel opens for emptying material or blading

The unique design of the 40-in. (102-cm) Tractor Shovel allows an operator who has a Select Series™ X300 Series (including X300R and X350R) or X500 Series Multi-Terrain Tractor to use the tractor shovel for lifting and moving material as well as for typical blade functions (without blade angling), such as blading, leveling, and scraping:

Unique shovel design empties material completely.
Shovel can be locked in the raised position for blading applications.

Operation

Operator station view

Control panel

The tractor shovel is operated from the tractor seat with the use of a control rod and an electric switch.

Electric actuator powers the tractor shovel

An electric actuator provides power to raise, lower, and empty the shovel.

To raise or lower the tractor shovel, use the electric switch on the tractor shovel panel.

Depress the bottom of the switch to raise the shovel and depress the top of the switch to lower the shovel.

Control rod for opening/closing of the shovel

Shovel in dump position

To open the shovel for emptying, raise it completely and then pull the control rod to the yellow area of the rod and press the upper end of the electric switch.

To close the shovel, press the lower end of the electric switch until the control rod releases to the black area of the rod.

Operation of the shovel for blading or leveling

Hand lift for locking into the blading position

Blading latch in the locked position

To use the tractor shovel for blading, use the handle on the right side of the shovel to raise it and then use the locking lever to lock it in the raised position.

Specifications

Length of tractor shovel	40 in. (101.6 cm)
Depth of tractor shovel	11 in. (27.9 cm)
Capacity	1.7 ft³ (48 L)
Cutting blade material	0.250-in. (6.4-mm) hardened steel
Material thickness, shovel	0.125 in. (3.2 mm)
Load capacity	150 lb (68 kg), evenly distributed
Lift height	4 in. to 6 in. (10.2 cm to 15.2 cm), depending on the tractor model
Shipping weight	110 lb (50 kg)
Warranty	One-year limited warranty on parts

Tractor compatibility and requirements

The 40-in. (102-cm) Tractor Shovel is compatible with the following tractors:

Select Series X300, X300R, X304, X310, X320, X324, X330, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Requirements and/or recommendations:

Rear ballast is recommended for best performance.
Tire chains are helpful and recommended when operating in snow.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tractor Shovel
Order number: LP63767

Battery charger and maintainer - TY25866

Battery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

Automatically determines if the battery is 6- or 12-V and adjusts accordingly
Helps maintain battery in good condition and ensures it is fully charged
Powers on to charge battery and powers off when fully charged
'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
1.5-amp trickle charges small batteries in 2 to 12 hours
Maintains large battery charges
Hookup protection guards battery and charger from damage

Includes a choice of battery connection methods:

Standard color-coded clips to connect to any battery
Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use

Bucket holder (double) - LPJD301

Double bucket holder (buckets ordered separately)

Transporting mulch, plants or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Ultimate™ Series Tractor. It is designed to carry up to 70 lb (32 kg) of material.

For use with standard 5-gal. (19-L) buckets - ordered separately.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (double)
Order number: LPJD301

Bucket (5-gal.)

Order number: LPJD400 (2 required)

Bucket holder (double) with buckets - LPJD301W

Double bucket holder

Transporting mulch, plants, or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Series Tractor. It is designed to carry up to 70 lb (32 kg) of material for transporting mulch, plants, yard waste, or for adding ballast.

For use with the included John Deere 5-gal. (19-L) buckets.

NOTE: May not fit all tractor models with a weather enclosure or cab installed.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (double) with buckets
Order number: LPJD301W

Bucket, 5 gal. (19 L) - LPJD400

5-gal. (19-L) bucket

This black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket - 5 gal. (19-L)
Order number: LPJD400

Fuel-Protect for gasoline engines, 8 oz (237 mL) - TY27534

8-oz (237-mL) Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round:

Has corrosion preventers
For lawn and garden equipment and other gasoline-powered vehicles
Ensures quick starts in all two- and four-cycle engines
Use in gasoline, gasoline-oil mixture, and ethanol blends
Use to treat gas cans at each fill-up or use at every fill-up of vehicle
Keeps fuel fresh for 12 months
Contains a fuel injector and carburetor cleaner
1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit JDParts.

Helpful tips:

Add fuel stabilizer every time fuel is purchased.
Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
Use plastic fuel containers to store fuel; ask a local John Deere dealer.
For best results, use a spill-proof gas can that automatically seals the gas can vent.
Store fuel in a cool, dry, dark place in a sealed fuel can.
Fill tank to the top every time the machine is put away.
- Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine.

For more information on fuel, visit John Deere Groundscare.

MowerPlus Smart Connector - BUC10537

Smart connector

The John Deere MowerPlus smart connector wirelessly links a Select Series X300 or X500 Tractor to the MowerPlus app on a mobile device:

No tools are needed for installation.
Detailed set-up instructions are included.
The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
The wireless connector and app work together to offer helpful information.

Tractor features available for viewing on the MowerPlus app include:

Tractor engine hours automatically synchronized to the app
In-app maintenance reminders and log, based on engine hours
Fuel level - even when away from the tractor, the app remembers information, like the fuel level, from the last synchronization.
- When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
Help to determine the best time to mow
Expert pre-mow optimization tips
Maintenance walk-through instructions

The operator is able to visit their device’s app store to see new app features as they are added.

Since the smart connector communicates instrument cluster information, future app releases will be able to provide additional operating recommendations and notifications.

MowerPlus smart connector (BUC10537) for Select Series X300 and X500 Tractors

Smart connector, wiring harness, and twist ties

One end of the wiring harness plugs into the back of a Select Series X300 or X500 Tractor instrument cluster. The other ends plug into the smart connector and the tractor's wiring harness.

Compatibility and requirements

MowerPlus smart connector (BUC10537) is for model year 2016 and later Select Series X300 and X500 Tractors.

MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:

iOS® version 10 or higher is compatible with the smart connector.
Android™ version 5.1 or higher is compatible with the smart connector.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Seat net kit - AM136046

Seat net kit

Seat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.

Snow blower and front blade compatibility kit - BM26155

Compatibility kit parts

Updates a model year 2006-2015 44-in. (112-cm) Snow Blower, 47-in. (119-cm) Snow Blower, or 48-in. (122-cm) Front Blade for use on a model year 2016 Select Series™ X300 or X500 Mult-Terrain Tractor.

Mower Blades

Blade (48C/48X/48A mulching) - M127673

Side-discharge blade/mulching blade

Blade (48C/48X/48A side discharge) - M145476

Side-discharge blade/mulching blade

Mower Decks

Dry-condition kit (48A) - BM26238

Dry-condition kit components

Dry-condition kit installed on mower deck

The BM26238 dry-condition kit, 48A is available for 48A Accel Deep Mower Decks used on S240 Tractors, model year 2016 and later X300 and X500 Select Series™ Tractors and Residential ZTrak™ Mowers. The 48A dry-condition kit will also work with any X700 Signature Series Tractor (model year 2013 and later) that is equipped with a 48A Mower Deck.

The dry-condition kit will reduce the amount of blowout around the mower deck when side discharging, mulching, or bagging in dry grass and leaf conditions. For optimum mowing performance in lush-grass conditions, the dry-condition kit baffles may be removed.

Grass Groomer (48A/54A) - LP63761

Similar grass groomer shown - top view

Similar grass groomer shown - side view

Features and benefits

Homeowners can now achieve results just like the professionals
Brush is easy to adjust for varying mower cutting height
Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
The brush striping kit is a very economical and functional attachment

Compatible with the following:

48A or 54A - 48-in. (122-cm) or 54-in. (137-cm) Side-Discharge Mower for X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and X590 (model year 2016) Tractors

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

48A or 54A - 48-in. (122-cm) and 54-in. (137-cm) grass groomer

Order number: LP63761

Mower deck leveling gauge - AM130907

Mower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

Lawn tractors
Lawn and garden tractors
Riding mowers
Front mowers
Commercial walk-behind mowers
Zero-turn-radius mowers

Mulch Kits

48A MulchControl attachment - BM24993

MulchControl advantages and benefits

Z535M ZTrak™ with Accel Deep 48A Mower

X730 Tractor with 48A Mower Deck

The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

A beautiful looking lawn
Grass clippings not blown onto the operator, driveways, or flower beds
Less fertilizer use
Elimination of the effort needed to dispose of clippings

How MulchControl works

MulchControl baffle open (similar mower from X700 Series Tractor shown)

MulchControl baffle closed (similar mower from X700 Series Tractor shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl baffle closed

MulchControl handle

The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
- The operator is required to get off of the machine in order to engage or disengage mulch mode.
Changing from mulching to side discharging or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

Usually mulch, but side discharge when grass gets too long
Usually side-discharge, but would like to be able to close the chute to control clippings
Always mulch a main lawn, but often side discharge secondary lawns
Bag clippings, but want to go farther before emptying bags
- With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.

MulchControl limitations

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn clean-up is desired

48A electric one-touch MulchControl attachment - BUC10165

MulchControl advantages and benefits

Mower equipped with electric one-touch MulchControl

MulchControl switch

The 48-in. (122-cm) electric one-touch MulchControl attachment enhances versatility and productivity. A mower deck equipped with electric one-touch MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted to side discharge or mulch mode with the touch of a switch:

Easily converts while mowing from side discharge mode to mulch mode or vice versa
In mulch mode, controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.)
Reduces cleanup time needed to dispose of clippings
Will reduce the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material because of the additional baffles under the mower deck

How electric one-touch MulchControl works

A tractor equipped with the electric one-touch MulchControl attachment delivers unprecedented levels of productivity and versatility. A convenient, dash-mounted switch provides operators the ability to change between side discharging and mulching. A heavy-duty baffle opens and closes easily with the touch of the dash-mounted switch.

MulchControl electric switch

MulchControl electric actuator

A dependable electric actuator is used to close and open the discharge baffle. The mower deck can easily be converted from side discharge mode to mulch mode or vice versa in a few seconds by activating the switch.

MulchControl baffle open (similar mower deck shown)

MulchControl baffle closed (similar mower deck shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl attachment includes baffles to control the flow of material under the deck.

The MulchControl baffle, or divider, between the left and middle spindles is about halfway down. The height is designed to balance the mulch and side discharge modes.
When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.

The MulchControl electric switch is located on the tractor dash to open and close the discharge baffle.

The operator is not required to get off of the machine in order to engage or disengage mulch mode.

MulchControl is well suited to the following mowing situations:

For operators who usually mulch, but side discharge when grass gets too long
For operators who usually side discharge, but would like to be able to close the chute to control clippings
For operators who always mulch a main lawn, but often side discharge secondary lawns
For operators who bag clippings, but want to go farther before emptying bags (48A and 54A Mower Decks only)

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when desired.

With electric one-touch MulchControl, operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require:

When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
When a breeze might blow clippings back onto the operator
For side discharge mowing only the areas of the property where grass is too tall or thick for mulching
With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
- With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
- Models equipped with a 42A Mower Deck require a MulchControl baffle be removed to install the bagger chute; see 42A versatility explanation for more information.

Advantages of MulchControl include:

Performance is improved.

Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
Clippings are much smaller, which allows them to fall into the grass and be removed from view.
Unsightly grass clippings are not blown onto driveways or into flower beds.
Fertilizer use is reduced and provides associated environmental benefits.

Uptime is increased.

Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall or thick to mulch effectively.

Cost of operation is reduced.
- Controlling clipping dispersion reduces cleanup time.

MulchControl limitations

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn cleanup is desired

Compatibility

This electric one-touch MulchControl attachment is field installed and compatible with any 48A Mower installed on an X300 or X500 Select Series Tractor.

NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Protection

Brush guard (X300/X500 M-T) - BM23057

Brush guard

The brush guard adds a distinctive appearance to the tractor and protects the front of the tractor from damage.

Brush guard lowered to permit opening hood

By removing one spring clip and pin, the brush guard may be lowered to permit opening the hood.

Bumper (X300s, X500, X530, X534, X570) - BM23056

Front bumper

The front bumper adds a distinctive appearance to the tractor and protects the front of the tractor from damage.

Features include:

Bumper can be easily mounted to the front of the tractor.
Bumper can remain on the tractor when the front blade or snow blower are used.

Riding mower cover, large deluxe - LP93647

Protective cover (large deluxe)

Cover provides heavy-duty protection for Select Series™ X300, X500, and X700 Tractors.

Features include:

Wipe-clean reinforced bottom around mower deck
Easy-on side handles makes snugging down cover a snap
Dual reinforced air vents let air circulate and help prevent ballooning in wind
Interior lining and integrated muffler heat shield
Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
Easy-on split back for fast fitting and easy access after installation
Handy storage pocket reverses into an attractive storage case
Two-year warranty

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (large deluxe)

Order number: LP93647

Riding mower cover, standard - LP93917

Protective cover (standard)

Features include:

Dual vents let air circulate and help prevent ballooning in wind
Elastic shock cord in bottom hem for a quick, custom-like fit
Coated fabric for maximum water protection
One-year warranty

Cover provides all-season protection for 100 Series, S240 and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (standard)

Order number: LP93917

Seat cover, medium deluxe yellow - LP92624

Seat cover, deluxe medium

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

Access to lumbar adjustment controls
Large-capacity rear-zippered cargo pocket
Two side mesh beverage pockets
Elastic cord in bottom hem for a custom fit
Medium size fits seats with backrests up to 15 in. (38.1 cm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe medium
Order number: LP92624

Seat cover, medium standard yellow - LP92324

Seat cover, standard medium

Seat cover protects new seats and renews old seats:

Cushioned seat for extra comfort
Four convenient pockets for keeping tools and gear within reach
Elastic cord in bottom hem for a custom fit
Medium size fits seats with backrests up to 15 in. (381 mm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

Spanish North American Kit

Spanish label and operator's manual kit - BUC10202

Spark Arrester

Spark arrester muffler screen (X300s, X500 M-Ts) - AM135845

Spark arrester

Spark arrester is available to meet the law in the State of California requiring use of a spark arresting muffler under certain conditions.

Applies in other states and Canada when needed to comply with local ordinances or customer requests.

NOTE: This law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except watered lawns) without a spark arrester. For further information on this law, consult No. 4442.5 of the California Public Resources Code.

Sprayers

Mounted Sprayer, 25 gal. (95 L) (X300/X500 M-T) - LP22861

25-gal. (95-L) Mounted Sprayer shown on X300 Tractor

Features and benefits:

100-psi (689-kPa) SHURflo® diaphragm-type pump is designed for high-hour commercial applications; it can be run dry without damage.
It is easy to assemble the custom mounting brackets.
- Brackets use the existing frame holes.
Brass-tipped spray wand is included as standard equipment; it is constructed of noncorrosive polypropylene material with Viton® components for multi-use applications.
Check valves in the boom tips prevent siphoning and dripping, which can cause lawn spotting.
Control valve directs spray to either the boom or spray wand for added convenience
and versatility.
Electrical hookup is simple with a convenient on/off switch.
Sprayer contains a rugged translucent-yellow tank with molded fill-level indicators (in gallons).
It is only a 15-second no-tools mounting after assembly.

Specifications

Item number	LP22861
Tank capacity	25 gal. (95 L)
Boom	60-in. (152.4-cm) boom, 90-in. (228.6-cm) spray
Spray wand reach	30 ft (9.1 m)
Hose length	19 ft (8 m)
Shipping weight	35 lb (16 kg)
Warranty	2-year consumer warranty

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Mounted Sprayer for X300 and X500 Tractors

Order number: LP22861

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

Tow-Behind Sprayer, 15 gal. (57 L) - LP19478

15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

Sprayers provide an excellent way to apply liquid fertilizer.
Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

Fertilizer is more readily available to plants.
The fertilizer need not be worked into the soil by watering or rain before it will work.
Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

Tow-Behind Sprayer, 25 gal. (95 L) - LP19479

25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

Sprayers provide an excellent way to apply liquid fertilizer.
Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

Fertilizer is more readily available to plants.
The fertilizer need not be worked into the soil by watering or rain before it will work.
Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

Spreaders

Mounted Electric Broadcast Spreader, 125 lb (57 kg) (X300/X500 M-T/X700) - LP35439

Mounted electric spreader

The mounted electric broadcast spreader for Select Series and Signature Series Tractors is ideal for medium- to large-size jobs and can be used to apply fertilizer, weed killer, sand, lime, and de-icer:

Compatible with X300 and X500 Select Series and X700 Signature Series Tractors
- X300 Series Tractors must be equipped with 35-lb (16-kg) front wheel weights or front weight bracket and two 42-lb (19.1-kg) Quik-Tatch weights.
- The electric broadcast spreader is not compatible with the X300R Rear Discharge Tractor.
- When used on X700 Series Tractors, the spreader is not compatible with the weather enclosure, cabs, rear receiver hitch, or 3-point hitch.

Key features are as follows:

125-lb (57-kg) capacity injection molded poly hopper
Durable welded, powder-coat frame
Ice-melt capability
Gear motor with 5-to-1 reducer
Stainless-steel shutoff plates
Directional control
Hopper cover is standard equipment
Available option: Barrier shield, 125-lb (57-kg) spreader

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Select Series Electric Spreader

Item number: LP35439

Mounted electric broadcast spreader barrier shield - LP23117

Spreader barrier shield

The barrier shield is used to direct product downward (36-in. [914-mm] width), converting the rotary spreader into a drop spreader. Perfect for ice melt and salt spreading, or for targeting specific areas.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb electric broadcast spreader barrier shield
Order number: LP23117

Pull-Type Spin Spreader, 125 lb (57 kg) - LP25353

125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

Seed
Fertilizer
Insecticide
Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

Positive on/off system (no cables)
125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
13-in. (33-cm) pneumatic tires for easy rolling
Enclosed gearbox (metal gears)
Ergonomic dual handle featuring Accu-way™
Accu-way even spread pattern adjustment
Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

Dial position locks and unlocks automatically.
More than 80 settings provide an accurate application of materials.

Specifications

	125-lb (57-kg) Pull-Type Spreader	175-lb (79-kg) Pull-Type Spreader
Recommended market	Homeowner	Homeowner
Type	Tow-behind	Tow-behind
Bundle number	LP25353
Box capacity	125 lb (57 kg), 2.5 cu ft (0.07 m3)	175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)	14.5x25.25x19.75 (36.8x64.1x50.2)	18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
Hopper	Polyethylene	Polyethylene
Hopper screen	Aluminum	Aluminum
Hopper bottom plate	Stainless steel	Stainless steel
Throat opening, in. (cm)	0.81x2.75 (2.1x7)	0.81x2.75 (2.1x7)
Connecting hardware	Stainless steel	Stainless steel
Accurate application
Rate control	80-setting Dial-A-Matic knob	80-setting Dial-A-Matic knob
Rate gate	No-stick nylon	No-stick nylon
Rate gate linkage	Stainless steel	Stainless steel
Even dispersal
Spinner, in. (cm)	12 (366)	12 (366)
Spread pattern, ft (m)	10 to 12 (3.1 to 3.7) wide	10 to 12 (3.1 to 3.7) wide
Spread pattern equalizer	Accu-way™	Accu-way
Spinner shaft	Zinc-plated steel	Zinc-plated steel
Rotary agitator	Stainless steel	Stainless steel
Miscellaneous
Frame	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)	18 (45.7)	18 (45.7)
Drive gears	Heavy-duty die-cast metal	Heavy-duty die-cast metal
Axle	0.63-in. (15.9-cm) solid steel, zinc plated	0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires	13-in. x 5-in. (33-cm x 13-cm) pneumatic	13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed	3.5 mph (5.6 km/h)	3.5 mph (5.6 km/h)
Warranty	One-year limited	One-year limited
Net weight, lb (kg)	29 (13.2)	34 (15.4)

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

Pull-Type Spin Spreader, 175 lb (80 kg) - LP25354

175-lb (79-kg) Pull Spreader

Seed
Fertilizer
Insecticide
Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

Positive on/off system (no cables)
175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
13-in. (33-cm) pneumatic tires for easy rolling
Fully enclosed gear box with metal gears for long life
Accu-way even spread pattern adjustment
Includes screen and cover

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

Dial position locks and unlocks automatically.
More than 80 settings provide an accurate application of materials.

Specifications

	125-lb (57-kg) Pull-Type Spreader	175-lb (79-kg) Pull-Type Spreader
Recommended market	Homeowner	Homeowner
Type	Tow-behind	Tow-behind
Bundle number	LP25353
Box capacity	125 lb (57 kg), 2.5 cu ft (0.07 m3)	175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)	14.5x25.25x19.75 (36.8x64.1x50.2)	18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
Hopper	Polyethylene	Polyethylene
Hopper screen	Aluminum	Aluminum
Hopper bottom plate	Stainless steel	Stainless steel
Throat opening, in. (cm)	0.81x2.75 (2.1x7)	0.81x2.75 (2.1x7)
Connecting hardware	Stainless steel	Stainless steel
Accurate application
Rate control	80-setting Dial-A-Matic knob	80-setting Dial-A-Matic knob
Rate gate	No-stick nylon	No-stick nylon
Rate gate linkage	Stainless steel	Stainless steel
Even dispersal
Spinner, in. (cm)	12 (366)	12 (366)
Spread pattern, ft (m)	10 to 12 (3.1 to 3.7) wide	10 to 12 (3.1 to 3.7) wide
Spread pattern equalizer	Accu-way™	Accu-way
Spinner shaft	Zinc-plated steel	Zinc-plated steel
Rotary agitator	Stainless steel	Stainless steel
Miscellaneous
Frame	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)	18 (45.7)	18 (45.7)
Drive gears	Heavy-duty die-cast metal	Heavy-duty die-cast metal
Axle	0.63-in. (15.9-cm) solid steel, zinc plated	0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires	13-in. x 5-in. (33-cm x 13-cm) pneumatic	13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed	3.5 mph (5.6 km/h)	3.5 mph (5.6 km/h)
Warranty	One-year limited	One-year limited
Net weight, lb (kg)	29 (13.2)	34 (15.4)

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

Tow-Behind Aerator-Spreader, 40 in. (102 cm) - LPAS40JD

40-in. (102-cm) Tow-Behind Aerator Spreader

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
132 steel-tine tips on 8-in. (20-cm) diameter tine stars
Three-position, full-sized lift lever
Direct spreader drive for consistent performance
Adjustable flow control
100-lb (45-kg) spreader capacity
4.10/3.5-4 pneumatic tires for easy pulling
75-lb (34-kg) capacity weight tray

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 2 in. (5.1 cm), two positions
Spreader capacity	100 lb (45 kg)
Tines
Number of tips	132
Diameter	8 in. (20.3 cm)
Material	Steel
Lift adjuster	Manual
Wheels	4.10/3.5-4, pneumatic
Drive	Direct
Weight-tray capacity	100 lb (45 kg)

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

Tow-Behind Broadcast Spreader, 130 lb (59 kg) - LP39087

130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Tow-Behind Broadcast Spreader, 175 lb (80 kg) - LPBS36JD

Broadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

The polyethylene hopper will not dent or rust.
All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
Large pneumatic turf tires ensure a positive drive and smooth operation.
High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
Fully enclosed gearbox eliminates downtime and maintenance.
Autoflow feature stops the flow of materials - automatically - to prevent burns.
Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun Protection

Sun shade (X300 and X500 M-T) - BM23054

Sun shade for Select Series X300 and X500 Tractors

Sun shade installs on heavy-duty CargO Mounts

The sturdy sun shade provides an effective way to keep the sun off of the operator for more comfortable warm-weather operation of the tractor:

Frame is made of strong 1.25-in. (32-mm) diameter steel tube with 0.063-in. (1.6-mm) wall thickness.
The sun shade mounts to the heavy-duty CargO Mount™ system.
- Sun shade includes the 4-wheel-steer rear weight bracket to provide a sturdy
  Quik-Tatch mounting system.
  - Holds up to two 42-lb (19-kg) Quik-Tatch weights on X300 Series Tractors
  - Holds up to four 42-lb (19-kg) Quik-Tatch weights on X500 Multi-Terrain Tractors
Cloth top measures 32-in. (81.3-cm) long by 34-in. (86.4-cm) wide.
Rear panel is made of cloth mesh material to provide additional protection from the sun while permitting the operator to see through it.
Two bolts with hand knobs on the mounting posts allow easy removal of the sun shade.
Elastic strap with clip is included to hold the 7-bu (247-L) hopper top open when the hopper is installed.
Overall height to the top of the sun shade is 72 in. (182.9 cm).

The sun shade is compatible with the following:

Select Series™ X300, X304, X320, X324, X340, X350, X354, X360, X370, X380, X384, X390, and X394 Tractors
Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Sun shade installed using 7-bu (247-L) bagger bracket

The 7-bu (247-L) 2-bag hopper or 14-bu (493-L) 3-bag hopper can be installed and used with the sun shade installed. The sun shade installation instructions explain how to install the hoppers with the sun shade.

Ordering Information

Please contact your local John Deere dealer for availability and pricing information.

X300/X500 Sun Shade

Order number: BM23054

Thatchers

38-in. (97-cm) Front Thatcher (Center) - LP48004

Front thatcher

The thatcher, used on a regular basis, reduces excessive thatch buildup that can be damaging to a lawn's health.

Since it provides more gentle, less aggressive action than a power rake, it can be used as a preventive maintenance tool each time the lawn is mowed.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

38-in. (97-cm) Front Thatcher

Order number: LP48004

8-in. (20-cm) Front Thatcher (Extension) - LP48003

8-in. (20-cm) thatcher extension for wider widths

An 8-in. (20-cm) extension is available to provide widths of 46 in. (117 cm) and 54 in. (137 cm) (Add an extension to one end of front thatcher to make it 46-in. [117-cm] wide; add an extension to both ends for a 56-in. [142-cm] width.)

Thatcher Mounting Frame (X300/X500 M-T) - LP48005

Front thatcher installed on X534 Tractor

A thatcher mounting frame is required to install the 38-in. (97-cm) front-mounted thatcher on a vehicle.

Tow-Behind Thatcherator, 40 in. (102 cm) - LPTA40JD

40 in. (102-cm) Tow-Behind Thatcherator

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

40-in. (102-cm) width to cover ground fast
20 spring-loaded tines for maximum performance
Three-position adjustment
Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Width	40 in. (101.6 cm)
Tines
Number	20, spring-loaded tips
Diameter	0.19 in. (0.5 cm)
Material	Steel
Weight tray capacity	100 lb (45 kg)
Lift adjuster	Three positions
Wheel
Size	8 in. (20.3 cm)
Tread	Rib
Material	Steel
Optional extension	8 in. (20.3 cm)

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

Tire Chains

Tire chains (pair) for 22x11-10 and 22x9.5-12 tires - TY24327

Tire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using attachments such as a snow blower or front blade.

One pair of chains is included in each bundle.

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, and E120 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, and E180 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

Tow Behind

Lawn Sweeper, 42 in. (107 cm) - LPSTS42JD

42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

42-in. (107-cm) clearing width
17-bu (599-L) capacity to make fast work of picking up material
Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
Hitch has seven positions to match up correctly with a variety of vehicles
Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

Specifications

Brush height	Sweeping conditions
Ground level to 1 in. (25 mm) above	Smooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)	Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)	High grass, heavy leaves, or heavy grass clippings

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD

Lawn Sweeper, 44 in. (112 cm) - LP49038

44-in. (112-cm) Lawn Sweeper

The 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

44-in. (112-cm) clearing width
17-bu (599-L) capacity to make fast work of picking up material
Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
Hitch has seven positions to match up correctly with a variety of vehicles
Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

Specifications

Brush height	Sweeping conditions
Ground level to 1 in. (25 mm) above	Smooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)	Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)	High grass, heavy leaves, or heavy grass clippings

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038

Lawn sweeper dethatcher kit (LPSTS42JD) - LP42108

Dethatcher kit for sweeper

This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Dethatcher kit for sweeper

Order number: LP42108

MT42C Multi-Tool 42 in. Combo (Plug Aerator and Thatcher) - LP39089

Multi Tool

The Multi Tool includes one platform and two separate attachments, saving space and money.

Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
Elongated handle - makes it easier to raise into transport or lower for use
Spring assisted lever - makes changing the attachments quick and easy

John Deere has combined the best lawn tools into one package.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Multi Tool

Order number: LP39089

Tow-Behind Lawn Roller, 18 x 36 in. (46 x 91 cm) Poly - LPPRT36JD

36-in. (91-cm) Tow-Behind Lawn Roller

The Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:

36-in. (91-cm) wide polyethylene drum
390-lb (177-kg) weight for excellent leveling
Rounded end caps to reduce gouging
42-U.S. gal. (159-L) capacity
Long-lasting Nylatron® bearings

Nylatron is a trademark of QUADRANT AG or its affiliates or licensors.

Quality design

Specifications

Width	36 in. (91 cm)
Roller
Size	36 in. x 18 in. (91 cm x 46 cm)
Capacity	42 U.S. gal. (159 L)
Weight (filled)	390 lb (176.4 kg)
Drum/end-cap material	High-density polyethylene (HDPE)
Bearings	Nylatron

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

36-in. (91-cm) Tow-Behind Lawn Roller

Order number: LPPRT36JD

Tow-Behind Plug Aerator, 40 in. (102 cm) - LPPA40JD

40-in. (102-cm) Tow-Behind Plug Aerator

The 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:

40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
1-in. (2.5-cm) diameter high-carbon steel-tine shaft
4.10/3.50-4 pneumatic tires for easy pulling
175-lb (79-kg) capacity weight tray

Quality design

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 3 in. (7.6 cm)
Tines
Number of tips	28
Spacing	6 in. (15.2 cm) apart
Material	Carbonized, 16-gauge, 0.6-in. (1.5-mm) steel
Lift adjuster	Manual, three position
Wheels	4.10/3.5-4, pneumatic
Weight-tray capacity	175 lb (79.4 kg)

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Plug Aerator

Order number: LPPA40JD

Tow-Behind Spiker Aerator, 40 in. (102 cm) - LPSAT40JD

40-in. (102-cm) Tow-Behind Spiker Aerator

The 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:

40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
10-in. (25-cm) diameter steel-tine stars
132 steel-tine tips on 11 spike wheels
3.5-in. (9-cm) spike-wheel spacing
Full-sized lift lever
4.10/3.5-4 pneumatic tires for easy pulling
100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration

Quality design

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 2 in. (5.1 cm)
Tines
Number of tips	132
Diameter	10 in. (25.4 cm)
Spacing	3.5 in. (8.9 cm) apart
Material	Steel
Lift adjuster	Manual
Wheels	4.10/3.5-4, pneumatic
Weight tray capacity	100 lb (45 kg)

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Spiker Aerator

Order number: LPSAT40JD

Weather Enclosures

X300 Series weather enclosure - LP55438

Weather enclosure for X300 and X500 M-T Tractors

The roomy steel-frame cab shields the operator against snow, rain, sun, and wind.
Key features include:

Easy entry with hinged-door access
Double-zippered access hole for control maneuverability
Super-clear vinyl windows that are cold-crack tested to -4°F (-20°C)
Zippered windows that allow for additional airflow
Assembles and installs with standard hand tools in one hour
Overall height from ground to top of cab of 78 in. (198 cm)

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Weather enclosure

Discontinued - LP36740 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, and X360 Tractors
LP55438 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, X350, X360, X354, X370, X380, X384, X390, and X394 Tractors
Discontinued - LP36741 Weather Enclosure - Select Series X500, X520, X530, X534, X540, and X590 (model year 2015) Multi-Terrain Tractors
LP55439 Weather Enclosure - Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Weights

30-lb (14-kg) Wheel Weight (1), cast iron, 8-in. front wheel - BM17964

30-lb (13.6-kg) front wheel weight

One 30-lb (13.6-kg) cast-iron weight may be installed on each front wheel for additional stability when operating on hillsides or with heavy rear equipment.

Requirements:

Mounting may require drilling two holes in the wheel rim.
BM17978 mounting hardware kit is required for each weight.

NOTE: Front wheel weights are not available for special-edition tractors because the styled front wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.

Quik-Tatch Weight, 42 lb (19 kg) - UC13263

42-lb (19-kg) Quik-Tatch weight

42-lb (19-kg) weights and optional mounting bracket

The 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.

This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).

Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.

X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:

One M147986 weight retaining rod (Parts)
Two M40461 spring clip (Parts)

Weight bracket, front (X300/X500 M-T) - BM25370

Standard front bumper

Optional front weight bracket/bumper installed

The optional front weight bracket/bumper is available to replace the standard front bumper on the following tractors:

Select Series™ X300, X300R, X304, X305R, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
Model year 2007 and later (SN 020001-) Select Series model X500 Tractor
All X530 Select Series Tractors
Model year 2011 and later (SN 060001-) Select Series model X534 Tractor
X570 Select Series Tractor

Front weight bracket/bumper with four weights

NOTE: Weights are ordered separately.

Holds up to four 42-lb (19.1-kg) Quik-Tatch weights:

Provides an alternative to front-wheel weights for ballasting rear-mounted equipment
Makes the 42-in. (106.7-cm) Hydraulic Tiller compatible with the X530 Tractor
Functions as a bumper when weights are not installed

Can be used in combination with all John Deere equipment, except the following:

Styled front bumper (BM23056)
40-in. (101.6-cm) Tractor Shovel

Weight bracket, rear (X304, X324, X354, X384, X394, X534, X584) - BM24011

Weight bracket shown with two 42-lb (19.1-kg) weights

Rear weight bracket is designed to hold two suitcase weights on X300 Tractors and up to four suitcase weights on X500 Multi-Terrain Tractors.

This item required for 4-wheel-steer tractors only; weight bracket is built into frame of 2-wheel-steer tractors.
It is particularly useful to counterbalance a front-mounted attachment such as a snow blower or blade.
Weight bracket can be quickly mounted to the rear of the tractor.
Weight bracket will not interfere with rear grass bagger mounting bracket.

Wheel weight mounting hardware for attaching one front wheel weight - BM17978

30-lb (13.6-kg) front wheel-weight shown

Hardware is required for installing each front-wheel weight.

Requirements:

Mounting may require drilling two holes in the wheel rim.
BM17978 mounting hardware kit is required for each weight.

NOTE: Front-wheel weights are not available for special edition tractors because the styled front-wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.

Reviews

4.44

9 reviews

VALUE4.38

QUALITY5

EASE OF USE4.75

4 wheel steer is great!

4/5

This is my 2nd full year of ownership. I previously had a 324 four wheel steer. The added power steering and hydraulic lift are a real plus. I have a lot of trees to mow around and I too have an issue with the deck rollers scalping around some trees that have a taper around them. They do need to figure out a modification on this. I mow approximately 3 acres of trees and lawn on a varying landscape and the 4 wheel steer is a lifesaver. Also, the mulch deck is prone to retaining grass and requires cleaning more than I would like. But overall, am happy with the unit. Have about 270 hours on it.

Pros

easil manuvers around everyt
reliable

Cons

deck wheels
deck accumu

Driller

From: Iowa

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE4

QUALITY2

EASE OF USE5

Turn Yard Work to Yard fun

5/5

I have owned John Deere Garden equipment for the last 15 years. While still in good condition, I retired my L108 tractor in favor of a new X394. I added manual mulching control and blades and a front brush guard. I have a modest size lawn that rises in height about 20 feet from the pond in my back yard. I have lots of curved flower beds to navigate. I have mowed my lawn twice with the new tractor. To say this powerful 48" deck unit is overkill is an understatement. I easily mows my 100 x 120 foot lot in a matter of minutes. Beautiful cut, 4 wheel power steering makes all maneuvering quite simple, and I quickly mastered the extra features of this new unit. My only observation is that I really should be mowing my side of the neighborhood to allow this tractor to really show what it can do. Nothing runs like a Deere.

Pros

hydrolic lifter for the mower deck and the pto

Cons

brush guard lowered first to open the hood.

KenM

From: Joliet, IL

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

VALUE4

QUALITY2

EASE OF USE5

No Mower deck manual

3/5

What a pain. I bought this tractor and the 48A mower deck. I used to have a 345 tractor and 48 deck. This deck has two belts, and the owners manual had no diagram of the belt routing. I owned my JD 345 and 48 deck for 15 years, and deck came with manual and was not as nearly hard to remove and service deck. THIS deck, (Accel 48A) I've spent six hours trying to get the belts back on, after cleaning the deck. No explanation in the manual on how to route the belts. And no, it's not obvious how the belts go on. So you know, be prepared for a pain in the neck. Grrrr

Pros

Cons

belts & cheap metal

rr67gto

From: Clackamas Oregon

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Intermediate

VALUE0

QUALITY2

EASE OF USE5

"Lawn Lathe"- Precision Cut Tool

5/5

This is my first riding mower. Go big or go home, right? Cutting St.Augustine grass is a breeze for this thing. I have a 1/2 acre with a number of palm trees to cut around. That's where it's precision really shines! I wish the deck would cut at 5" tho. Some of the plastic has come loose around the tilt column also. Other than that, its been really solid over the past 5 months of ownership. I never wash it off,just leaf blower and always try to cut when it's dry. Also wouldn't mind if Deere offered some other colors too. Black maybe?

Pros

great cut
easy handling
plenty power

Cons

thirsty
plastic quality
no 5" cut height

Forzman

From: South Florida

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

VALUE4

QUALITY2

EASE OF USE5

This mower is a joy to use.

5/5

I have always used Craftsman mowers and got pretty good results. My x394 is many times better than the Craftsman. My only complaint is the deck wheels should swivel. When making a tight turn they tend to scrape the ground sliding sideways leaving a circle around trees. Power steering and deck lift are great. My deck washout doesn't seem to do much but not a major problem to me. My wife has no desire to use my mower she much rather see me on my green tractor.

Pros

power four wheel steering
deck lift
digital guages

Cons

deck wheels

JimN

From: Nashville Tn.

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE5

QUALITY2

EASE OF USE5

Best Mower I Ever Owned

5/5

This is not your Big Box Store rider, quality through and through. Excellent turning radius, power steering makes mowing a breeze, for someone with arthritis and lots of obstacles to mow around. The hydraulic lift and engagement make this feel like you are not operating a basic model, its quality you can feel. Not a cheap mower but you get what you pay for. Love my new x394 and my dealer is just awesome for service!

Pros

quality
ease of use

Cons

BobbyD

From: New England, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE5

QUALITY2

EASE OF USE5

Pricey, but worth it to me

5/5

I have an odd shaped 1/2 acre in lower Michigan and my self propelled walk behind mower would take me about 3 hours. Because its a 2nd home, that was too much time to spend cutting the grass since I am only up there on weekends (and its cuts into my boating & family time). Did a lot of research on mowers and the X394 stood out to me. Its my first riding mower and is VERY easy to use. I had the dealership add the grill guard and the mulch kit. My lawn cutting went from 3 hours to less than 45 minutes and it looks better too!! Love the 4-wheel steering and the hydraulic mower deck - I would purchase it again!!

Pros

Cons

mcirish101

From: Lower Michigan

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

VALUE4

QUALITY2

EASE OF USE5

Hard to clean deck

3/5

I replaced a GT235. When I purchased this mower last year I thought the under deck clean out was a good idea. But I wash my deck every time I mow. The top of the deck is very hard to clean. The blade pulleys are recessed into the deck and hold water plus the belts are too close to the deck and you can not wash clippings and debris under them. It takes twice as long to clean after mowing. Also, because of the 4 wheel steer, the tires are narrower and where you have to mow the same area, it leaves wheel marks in the yard even when not too wet. On a plus, the power steering and power deck are great.

Pros

power steering and power deck

Cons

hard to clean deck
leaves tire tracks in lawn

RW49

From: Oklahoma

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE4

QUALITY2

EASE OF USE5

Can't get this mower away from my wife.

5/5

Recently traded our 1996 LX 176 for a new X 394 with 4 wheel steer and hydraulic deck lift. I initially thought I wanted a Zero Turn like the commercial guys use but since my wife does as much mowing as I do she was concerned about the learning curve for the zero turn. After a lot of shopping and comparisons we went with the X394 and could not be happier. The cut quality is better than any zero turn I have seen. The power steering and the hydraulic deck lift are features I didn't know I needed but once you have them will not want to do without them. My only complaint is I have trouble getting to it before my wife does.

Pros

Cons

TLK3

From:

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE5

QUALITY2

EASE OF USE5