SW2172

Rotary Brooms

  • Angling degree range
  • Brush diameter is 32 inches for big jobs
  • Optional dust suppression system
  • Optional gauge wheel kit for setting height



View Product Brochure



Features



Angle to the left or rightAngle to the left or right

The loader-mount hydraulic rotary broom has an angling range from 0 to 23 degrees both left and right. Setting the angle allows for the windrowing of material off of surfaces.

 

NOTE: Operators can mount optional gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

Brush is large enough for tough jobsBrush is large enough for tough jobs

The 83-cm (32-in.) diameter brush is large enough for the toughest jobs.

 

NOTE: Operators can mount optional gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

SW21 Series dust suppression systemSW21 Series dust suppression system
227-L (60-gal.) tank227-L (60-gal.) tank

The optional dust suppression system consists of a 227-L (60-gal.) tank supplying water up the nozzles that are positioned in the front of the broom.

 

The nozzles are easily controlled by a toggle switch located by the height hitch lever.

 

NOTE: Requires the poly and steel deflector kit. Compatible with lawn dethatching kit.

For setting surface height of broom (shown with dethatching kit installed)For setting surface height of broom (shown with dethatching kit installed)
Gauge wheels shown in rear park stand mounting tubesGauge wheels shown in rear park stand mounting tubes

An optional pair of gauge wheels are available for setting the height of the broom for limited surface contact. This ensures easy operation when sweeping surfaces or dethatching lawns.

 

It includes two pairs of 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.

 

Operators can mount gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

A steel and rubber dust deflector kit directs material downward when using the SW21 Series Loader-Mount Rotary Brooms.

The dust suppression kit includes 227-L (60-gal.) water tank, electric pump, nozzles, hoses and fittings, electrical harness with switch, and installation instructions for SW21 Series Loader-Mount Rotary Brooms. 

 

NOTE: Requires the steel/rubber dust deflector kit.

Gauge wheels with dethatching and dust suppression kit installedGauge wheels with dethatching and dust suppression kit installed

The gauge wheel kit for SW21 Series Loader-Mount Rotary Brooms includes two pairs of 20.3-cm (8-in.) diameter by 8.9-cm (3.5-in.) wide solid wheels, mounting brackets, and hardware.

 

Operators can mount gauge wheels in rear parking stand tubes (closest to loader) if front dethatching bracket is not installed.

 

NOTE: By mounting wheels in front of the brush with the dethatching bracket installed, better control of ground pressure can be achieved.

Lawn dethatching kit componentsLawn dethatching kit components
#

The lawn dethatching kit for SW21 Series Loader-Mount Rotary Brooms improves control of ground pressure when dethatching and perfomring general sweeping by moving the gauge wheels in front of and closer to the brush. The kit includes support components, hardware, and installation instructions. The gauge wheel kit is required and sold separately. It is compatible with the dust suppression kit. 

The 50/50 poly and steel wafer brush replacement kit for the SW2160, SW2172, and SW2184 Loader-Mount Rotary Brooms includes the required quantity of wafers to replace the entire brush.

Specifications


Dimensions SW2172
Current Model
Machine length175 cm
69 in.
Machine width244 cm
96 in.
Power pack width97 cm
38 in.
Machine height87 cm
34.25 in.
Power pack height132 cm
52 in.
Weight
Machine operating417 kg
920 lb
Power pack operating243 kg
535 lb
Machine shipping561 kg
1237 lb
Power pack shipping243 kg
535 lb
Tractor compatibility
PTO minimum horsepower26.1 kW
35 hp
PTO, rpm540 rpm
Loader, current John Deere series400
Brush
Standard bristle materialsDiameter
81 cm
32 in.
Number of brush wafers
46
Poly
Optional bristle materialDiameter
81 cm
32 in.
Number of brush wafers
46
Combination (poly/wire)
Operation
Working width213.36 cm
84 in.
Working width at max angle195.58 cm
77 in.
Brush speed, rpm200 rpm
Angling
Angling range degrees, left, center, right23, 0, 23 degree (angle)
Shear pin protectionStandard
Angling methodHydraulic
Gauge wheels
StandardOptional
MaterialSolid
Location, front, rearFront
Size, diameter89x254 mm
3.5x10 in.
Adjustable height rangeTotal: 190.5 mm
7.5 in.
Underground level: 63.5 mm
2.5 in.
Quantity
Hydraulics
Operating pressure207 bar
3000 psi
Flow required at operating pressure61 L/min
16 gpm
Power pack reservoir57 L
15 gal.
System capacity64 L
17 gal.
Construction
Hood thickness0.19 cm
0.0747 in.
Side frame construction0.48 cm
0.1875 in.
Miscellaneous
Parking stands standard with unit, quantityFour
Hydraulic protection (relief valve)Standard
Dust deflectorOptional
Dust suppression system (60-gal. water tank)Optional
Brackets for de-icer optional systemStandard
Shipping
ConfigurationWood crate
Units per crateOne
Set-up time
Warranty

© COPYRIGHT 2024 LEGACY EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo

NOT SET