WC1208

Wood Chippers

  • Pull-type unit with drawbar
  • Adjustable discharge chute
  • Reversible, hydraulic feed roll



View Product Brochure



Features



Adjustable discharge chute with handleAdjustable discharge chute with handle
Rotates 360 degreesRotates 360 degrees

The discharge chute rotates 360 degrees for fast and easy positioning.

 

The chute also features an adjustable deflector to accurately direct the wood chips to the desired location.

Drum-style rotor is great for large chipping jobsDrum-style rotor is great for large chipping jobs
#

The WC1208 features a heavy-duty drum to make quick work of large chipping jobs.

 

The drum is designed to maintain a constant speed so material can be continuously fed into the feed box while creating a consistent chip size.

WC12 Series hydraulic feedroll frameWC12 Series hydraulic feedroll frame
#

The hydraulic feedroll is mounted on a spring-loaded frame on the WC12 Series Wood Chippers, allowing it to raise up and down depending on the size of the timber going through. 

 

The speed of the feedroll can be adjusted on the side of the wood chipper with the hydraulic flow valve.

Feed box with handleFeed box with handle
Reversible feedrollReversible feedroll

Engagement of the feedroll is done by pushing or pulling the handle that wraps around the outside of the feed box. The feedroll has three positions: neutral, reverse, feed (forward).

 

The feedroll grabs the material as it is fed into the chipper and allows the operator to step away while it automatically pulls material into the knives.

WC1208 Wood Chipper with pull-type hitchWC1208 Wood Chipper with pull-type hitch
#

The Frontier™ WC1208 is equipped with a sturdy frame and transport wheels, and the clevis-type drawbar makes attaching the unit easy.

 

It features a hose holder to conveniently hold hydraulic hoses for storage. It comes standard with a jack and safety chain.

This factory-installed, self-contained hydraulic kit is for tractors with less than 22.7 L/min (6 gpm) of hydraulic capacity or with no available rear selective control valves (SCVs). The kit contains a hydraulic reservoir and power take-off (PTO) driven hydraulic pump.

Specifications


Compare the specifications of up to 4 models

Dimensions WC1208
Current Model
Chip opening229x406 mm
9x16 in.
Hopper opening711x1067 mm
28x42 in.
Feed options
SystemHydraulic
Feed_x001A_roller diameter393.7 mm
15.5 in.
Hopper height68.6 cm
27.5 in.
Chip chute
Fixed
AdjustableRotation: 360 degree (angle)
Weights
Unit1161.2 kg
2560 lb
Rotor styleDrum
Rotor222.3 kg
490 lb
Tractor compatibility
PTO rpm540 rpm
HP range (Tractor PTO hp)56-86 kW
75-115 hp
3-Point hitch
CategoryPull-type
iMatch™ or Quik-Coupler
Hydraulics
Requirements30.3 L/min
8 gpm
Self-contained systemOptional
Chipping
Knife quantityTwo
Knife size1.59x11.43x22.86 mm
0.625x4.5x9 in.
Knife boltGr 8 hex head bolts: 15.9 mm
0.625 in.
Shear barA8 Hardened Anvil
Rotor rpm2050 rpm
Belt drive system
NumberFive
TypeB-7 banded belt
Set-up time
Warranty

© COPYRIGHT 2024 LEGACY EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo

NOT SET