Heating, ventilation, and air conditioning (HVAC) dash shown
Operator stationWhether it is a completely open operator station or a factory installed cab, the interior has been redesigned with comfort and ergonomics in mind.
 |
| HVAC dash shown (M trim) |
 |  |  |
| Tilt steering | Tilt steering (up position) | Tilt steering (down position) |
 |
| Bench seat adjustment |
 |
| Seating |
M cab door
R cab door
Side windows and front window 
Venting position
Headliner shown on an M-trim open station (with optional windshield, wipers, rear panel, and side mirrors installed)
Door sealing
Styled roof (R roof shown)
Front roof light
Rear roof light
Inner door handle
Outer door handle
M-trim HVAC controls 
812-cm3 (49.6- cu in.) gasoline engineThe machine is powered by an 812-cm3 (49.6-cu in.), 3-cylinder, dual overhead cams, liquid-cooled, four-cycle gasoline engine. It produces 6.5 kgm (47 lb-ft) of torque at 3200 rpm. The advanced electronic controls and fuel-injection system deliver superb starting, idling, and throttle response during operation.
The engine offers the following performance and reliability features:
* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.
XUV front suspension detailTo complement the robust frame, the XUV is equipped with four-wheel independent suspension.
A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.
The entire suspension system has been optimized to handle cargo without compromising ride quality or vehicle stability.
M-trim cab units (factory installed) and R-trim units have heavy-duty front and rear shocks installed from the factory.
XUV rear suspension detail
XUV rear suspension detailDual A-arm independent rear suspension features include:
The Gator™ XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously-variable clutch system to the transaxle.
Key elements of the drive system include:
Variable-speed driveThe variable-speed drive consists of two clutches and a drive belt:
Features include:
NOTE: Delivery and torque to the ground depends on tire size, which is a function of nominal size and pressure.
How the variable-speed drive works:
Side view of CVT intake and clutch enclosure
Differential lock lever and MFWD switchRear view of transaxle and CV shafts
CV boot protectionOperator interface features:
Transaxle features:
NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels.
MFWD features:
Drive shaft features:
Deluxe cargo box with optional light protectors
Top view of cargo boxThe deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust and dents and reduces noise.
Tailgate handle
Tailgate open
Tailgate lowered to 150 degreesThe tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.
The standard-installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.
Integrated handle for manual cargo box tiltThe deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.
A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.
Integrated tie-down point in cargo-box bed
Additional tie-down points (TH 6X4 shown)The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:
XUV835 Cab shown
XUV835M Cab shownOptional accessories for the deluxe cargo box:
| Length | 1143 mm (45 in.) |
| Width | 1320 mm (52 in.) |
| Depth | 304 mm (12 in.) |
| Volume | 0.46 m3 (16.4 cu ft) |
| Weight capacity | 454 kg (1000 lb) |
| Dump angle | 47 degrees |
CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.
On M- and R-trim vehicles, adding attachments and accessories is made easier by the inclusion of some main wiring harnesses that facilitate efficient hook-up.
Roof harness electrical port
Main vehicle harness – winch connection| Cargo box lift | Backup alarm | Brake / Tail / Reverse lights | Speed limiter kit | Base radio | Heater | 4500 lb winch | Premium radio (base radio kit needed) | LED lights - front OPS | Windshield wiper | Windshield washer | LED lights - brushguard | LED headlights | Turn signals | Horn | Beacon light | LED lights - rear OPS | Sprayers | Spreaders | AMS integration kit | |
| E | a | a | a,c | a,c,d | a,c,d | a,c,d | a,b | a,b | a,b | a,b | a,c,e | a,c,e | a,f | a,f | a,c,e,f | |||||
| M open | c | c,d | c,d | c,d | b | b | b | b | c,e | c,e | f | f | c,e,f | |||||||
| M cab | b | b | b | b | e | e | f | f | e,f | |||||||||||
| R | f | f | f |
| = connections in base harness | |
| a | E-spec Attachment Harness |
| b | Front Attachments Harness |
| c | Roof attachment harness |
| d | Front cab harness |
| e | Rear cab harness |
| f | Dash port harness |
| * | If blank, the base chassis harness has the connector for the attachment |
This Gator™ XUV Crossover Utility Vehicle is equipped with power steering and a dual A-arm front suspension. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort:
Electric power-assist steering systemElectric power-assist steering (EPAS) system has advanced features:
With the EPAS system, the operator maintains a direct mechanical linkage from the steering wheel to the front wheels. The power steering system interfaces mechanically with the steering system by being inserted between the steering wheel and the rack-and-pinion assembly.
A differential torque sensor is integrated into the power steering assembly. The circuit board assembly is also integral with the power steering assembly.
Power steering does not reduce turning radius but significantly reduces steering effort by approximately 85 percent compared to models without power steering.
EPAS interface diagramThe numbered descriptions refer to the EPAS interface diagram shown above:
The M trim adds electrical power-assist steering (EPAS) and brings in the main wiring harness for easier attachment hook-up. Cabs are available in this trim level. Heating, ventilation, and air conditioning (HVAC) is also an option within the M-trim level.
Compare the specifications of up to 4 models
| Key Specs | xuv835m-cab-utility-vehicle Current Model |
|---|---|
| Engine power | 43* kW 54* hp |
| Maximum traveling speed | 0-45+ hi forward, 0-29 lo forward, 0-33 reverse mph 0-72 hi forward, 0-47 lo forward, 0-53 reverse km/h |
| Cargo box dimensions | 1143 x 304.8 x 1320 mm 45 x 12 x 52 in. |
| Cargo box capacity (weight) | 454 kg 1000 lb |
| Towing capacity | 907 kg 2000 lb |
| Front suspension | Fully independent dual A-Arm with adjustable coils; 7.9 inches (200.7 mm) of travel |
| Rear suspension | Fully independent dual A-Arm with adjustable coils and sway bar; 9.1 inches (231.14 mm) of travel |
| Final drive | Two speed, oil bath |
| Four wheel drive | On-demand true four-wheel drive system |
| Fuel capacity | 42.4 L 11.2 U.S. gal. |
| Engine | |
| Type | 4-cycle gas, Electronic Fuel Injection (EFI) |
| Displacement | 812 cc |
| Power | 43* kW 54* hp |
| Cooling system | Liquid |
| Drivetrain | |
| Transmission | Continuously Variable Transmission (CVT) with clutch enclosure |
| Final drive | Two speed, oil bath |
| Four wheel drive | On-demand true four-wheel drive system |
| Traction assist | Positive locking, mechanically actuated (hand-operated) |
| Descent control | Yes |
| Maximum traveling speed | 0-45+ hi forward, 0-29 lo forward, 0-33 reverse mph 0-72 hi forward, 0-47 lo forward, 0-53 reverse km/h |
| Suspension | |
| Front | Fully independent dual A-Arm with adjustable coils; 7.9 inches (200.7 mm) of travel |
| Rear | Fully independent dual A-Arm with adjustable coils and sway bar; 9.1 inches (231.14 mm) of travel |
| Brakes | |
| Type | Front/rear hydraulic disc with twin piston front calipers |
| Park brake | Driveline, internal wet multi-disc, foot operated (hand release) |
| Tires / Wheels | |
| Front | 25x9-12 Terrahawk AT, 27x9-R14 Maxxis Big Horn Radials (on Alloy Rims), or Maxxis Big Horn Radials (on Steel Rims) |
| Rear | 25x11-12 Terrahawk AT, 27x11-R14 Maxxis Big Horn Radials (on Alloy Rims), or Maxxis Big Horn Radials (on Steel Rims) |
| Dimensions / Capacities | |
| Wheelbase | 2146 mm 84.5 in. |
| Dry weight | 970 kg 2134 lb With Cab and HVAC: 1019 kg With Cab and HVAC: 2241 lb *Additional Attachments and Accessories will add weight |
| Length | 3228 mm 127 in. |
| Width | 1763 mm 69.4 in. With doors: 1763 mm With doors: 69.4 in. |
| Height | 1987 mm 78.25 in. With roof: 1987 mm With roof: 78.25 in. |
| Tread centers | Front: 1341 mm Front: 52.8 in. Rear: 1259 mm Rear: 49.6 in. |
| Ground clearance | 284 mm 11.2 in. |
| Fuel capacity | 42.4 L 11.2 U.S. gal. |
| Cargo box dimensions | 1143 x 304.8 x 1320 mm 45 x 12 x 52 in. |
| Cargo box capacity (weight) | 454 kg 1000 lb |
| Payload capacity | 680 kg 1500 lb |
| Towing capacity | 907 kg 2000 lb |
| Hitch | Standard 2-in. receiver |
| Features | |
| Color | Green/Yellow, Camouflage, Olive and Black |
| Power steering | No on E Trim; Yes on M and R Trim |
| Battery / Alternator / Power port | 480 CCA 85 amp @ 6000 rpm, regulated, 1020 watts |
| Instrumentation | Digital Display (system diagnostic light, speed, rpm, 4WD indicator, fuel level, coolant temperature, hour meter, miles, park brake light) |
| Storage | 4 Cup Holders (2 additional for cab units), in dash, Under Seat (56.69 L), Glovebox (3.85 L), Optional Under Hood - except for HVAC units or units with the dealer installed heater kit |
| Seating | Bench (Available Bucket Seats on E and M Trim) |
| Headlights | Halogen - Single Beam (LED Dual Beam on R Trim) |
StarFire™ 3000 Receiver installed on XUV835R
GreenStar™ display installed on XUV835R with optional phone and tablet mountsThe AMS integration kit allows the operator to mount a StarFire Receiver and GreenStar display (both receiver and display sold separately) to the Gator™ Utility Vehicle.
Key features of the AMS integration kit:
NOTE: Additional components are required to support the John Deere 4640 Universal Display include:
Common applications:
Compatibility:
Electrical harness requirements:
| XUV835/865 | Attachment harness required (see below) |
| E | 1, 3, 5, 6 |
| M (open station) | 3, 5, 6 |
| M (cab, factory installed) | 5, 6 |
| R | 6 |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
| Code | Attachment | Description |
| BUC10634 | AMS integration kit |
The back-up alarm kit alerts pedestrians when the Gator™ is operating in reverse:
Rear bumper kit (TH 6X4 shown)The rear bumper offers stylish, heavy-duty rear protection to the vehicle.
Compatible with:
Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.
RAM X-Grip holderFor proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.
Simply remove the large wing nut from the assembly, insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.
Key benefits:
RAM X-GripThe RAM X-Grip has a clean and clever four-leg design that sports great holding power without hiding the phone behind foam pads and plastic.
Features:
Warranty:
90 days, limited.
RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM). Samsung Galaxy is a trademark of Samsung Electronics Co.
Cargo box pail holder
Cargo box pail holderThe 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.
Cargo bed extender
Cargo bed extenderThe cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.
Deluxe cargo box bed matThe deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.
Cargo box divider located at rear of cargo bed
Cargo box divider located at front of cargo bed
Speedrail lock in the unlocked postion
Speedrail lock in the locked postionThe Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.
Cargo box side extension kit 
The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.
Product features include:
NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.
Cargo box side extension kit (required, sold separately)
Cargo box side extensions cover
Tailgate down, side extension flipped up
Rear fender flare kit on XUV865
Rear fender flare kitA – Fender flare
B – Fender
The rear fender flare kit minimizes debris from reaching the operator station.
Product features include:
Tool rack
Tool rack with toolsThe side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.
Tool rack holder detail
Adjusting the tool rack holder 
Spare tire carrier
Spare tire carrierEasily mount a spare tire to the side of the cargo box with this convenient kit.
Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.
Sportsman gear bag (closed)
Sportsman gear bag (open)
Quick-connect latches on cargo boxAvailable through Order Zone
Shown in full up positionThe Gator™ XUV Series can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to these highly capable utility vehicles.
Deluxe cargo box cover (shown in black)
The deluxe cargo box cover easily installs without tools and keeps the cargo secure and protected from the elements. It is compatible with Gator Utility Vehicles equipped with the all-new deluxe cargo box.
Compatible with all model year 2011 - current Gator XUV 625i, XUV 825i, XUV 855D, TX, TX Turf, TH 6X4, TE, M-Gator™ A2, and M-Gator A3 Utility Vehicles.
Compatible with all model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Deluxe cargo box cover - Camo
Order number: LP19879
Vehicle storage cover
Vehicle storage cover
Available through Order Zone
48-mm (1-7/8-in.) hitch ballThe 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.
The ball hitch is available through Service Parts.
48-mm (1-7/8-in.) ball hitch shownThe 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.
The ball hitch is available through Service Parts.
Drawbar kit for receiver hitchDescription:
NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.
Left floor mat
Right floor mat
Hood rack
Hood rack (hinged forward)
MOLLE device pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE device pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE fire extinguisher pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE fire extinguisher pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE large storage pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE large storage pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE small storage pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE small storage pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
Brush guard
Quick pull pins
Brush guard hinged forward
Auxiliary lights mounted on brush guard (sold separately)
Brush guard extensions
Brush guard extensions
Brush guard with extensions hinged forward
Brush guard with extensions
Front CV guards
Rear CV guards
Cargo box fender guards
Front fender guards - shown with brush guard (required) and brush guard extensions (optional)
Rear-panel glass protector
Front attachment harness
Dash port harness connection
Dash port harness – lower connectors
Hydraulic blade and rear winch harnessKey features:
Compatibility:
Rear cab attachment harness
Heater vent locations (heater shown on export vehicle)
Heater switch
Horn
Horn switch| XUV835/865 | Attachment harness required (see below) |
| E | 1, 2 |
| M (open station) | 2 |
| M (cab, factory installed) | 2 |
| R | --- |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
Beacon light in up position
Beacon light in down position
Backlit beacon light switch| XUV835/865 | Attachment harness required (see below) |
| E | 1, 3, 5 |
| M (open station) | 3, 5 |
| M (cab, factory installed) | 5 |
| R | --- |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
UL is a trademark of UL LLC.
Front cab mounted
Rear cab mounted
Brush guard mounted
Driving beam pattern – mounted on brush guard
Driving beam pattern – mounted on OPS/roof
LED headlights
Three-position backlit light switch| XUV835/865 | Attachment harness required (see below) |
| E | 1, 2 |
| M (open station) | 2 |
| M (cab, factory installed) | 2 |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
Front cab mountedRear cab mountedBrush guard mounted
Flood beam pattern – mounted on OPS/roof
Brake and taillight protectorThe brake and taillight protector offers increased protection to the taillight assembly from incidental contact.
Rearview mirror
Side mirrors – open station
Side mirrors – open station
Side mirrors – cab door
Side mirrors – cab door
Accessory mounting bracket (shown with tablet and cell phone mount)
Visors (shown on R-spec)
Visors (shown on R-spec)
Tablet mount – upper mount location (shown with cell phone mount – sold separately) 
Tablet mount – lower mount location (shown with cell phone mount – sold separately)
RAM is a trademark of National Products, Inc.
Lower left speaker
Lower right speaker
Head unit (sold separately) installedNOTE: Must order head unit through Parts.
Jensen is a trademark of Electronics Trademark Holding Company LLC. SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc.
Upper speakers
Subwoofer
Bluetooth® microphone
SiriusXM® Radio antenna/tuner
SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. Jensen is a trademark of Electronics Trademark Holding Company LLC.
NOTE: Must order head unit through Parts.
Roof headliner
Roof headliner installation
Bench seat cover
Modular Lightweight Load-carrying Equipment (MOLLE) attachment location
Available through Order Zone
Cordura is a trademark of INVISTA North America S.à.r.l.
Bench seat coverAvailable through Order Zone
Comfort strapsKit includes two comfort straps for the left and right seat belts.
Speed limiter
Gator toolbox shown on TH 6x4 with deluxe cargo box
Gator toolbox - openQuality constructed from 16 gauge steel, this industrial tool box is durable enough to handle wear and tear even from the toughest contractors. This tool box keeps tools, equipment, and other valuables secure, clean, dry, and protected from outside elements - due to full weather seal locks and a rust-resistant, powder-coat paint application. Twin commercial-grade gas shocks automatically lift lid for effortless one-handed open/close. Comes complete with key locks to guard against theft.
Product attributes:
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Gator tool box
Order number: LP19886
Side-door opening toolbox This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Side-door opening toolbox features:
| Side-door opening toolbox |
Toolbox weight | 29 kg (64 lb) |
Toolbox capacity | 34 kg (75 lb) |
Toolbox dimensions | -Full box: 109.4-cm (43.1-in.) long X 35-cm (13.8–in.) wide X 32.5-cm (12.8–in.) tall -125-L (33-gal) total volume |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
This toolbox is compatible with the following Gator™ Utility Vehicle models:
Tailgate with brake lights and taillightsThis tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).
The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.
Optional label kits are designed to fit with this tailgate:
The tailgate is compatible with the following Gator™ utility vehicle models:
Top-door opening toolboxThis custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Top door opening toolbox features:
| Top door opening toolbox |
Toolbox weight | 32.7 kg (72 lb) |
Toolbox capacity | 32.7 kg (75 lb) |
Toolbox dimensions | -Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall -125-L (33-gal.) total volume |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
This toolbox is compatible with the following Gator™ Utility Vehicle models:
Underhood storage tub and tray installed in vehicle
Underhood storage tub with removable tool tray
Tracks
Available through Order Zone
Front turn signals
Rear signal lights (taillight protectors not included)
Hazards switch (top)
Turn signal switch (right)NOTE: Not intended for use on public roadways.
| XUV835/865 | Attachment harness required (see below) |
| M (open station) | 2 |
| M (cab, factory installed) | 2 |
| R | --- |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
2041.2-kg (4500-lb) winch (chassis mounted)
Plug-in remote| XUV835/865 | Attachment harness required (see below) |
| E | 1 |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
WARN is a trademark of WARN Industries, Inc.
Winch accessories kitDouble the pulling power, change the pulling direction, and keep the winch in proper working order.
The accessories kit is essential gear for operators getting the most out of their winch:
The accessories kit includes:
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
Wireless winch remote
Wireless winch remote mounted on XUV8352041.2-kg (4500-lb) winch (chassis mounted)
WARN is a trademark of WARN Industries, Inc.
2041.2-kg (4500-lb) winch (mounted on front receiver)
2041.2-kg (4500-lb) winch (mounted on rear receiver)
WARN is a trademark of WARN Industries, Inc.
Windshield washer bottle
Backlit three-position switch
Washer bottle location behind access panel| XUV835/865 | Attachment harness required (see below) |
| E | 1, 3, 4 |
| M (open station) | 3, 4 |
| M (cab, factory installed) | --- |
| R | --- |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
© COPYRIGHT 2024 LEGACY EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered By