455 FRONT FOLDING GRAIN DRILL

Front-Folding Grain Drill

Patented active hydraulic down-pressure system
Double-disk furrow openers
Seedbox capacities
Grass seed attachment

View Product Brochure

Share Facebook Twitter google_plus Email

Features

Seedbox capacities

Seedbox

Three-position combination grain/fertilizer box

Seed boxes have a large capacity for longer intervals between stops for refilling.

Plain grain or combination grain/fertilizer seed boxes are available to match the producer's needs.

The versatile grain/fertilizer box has a three-position divider that can be set for 100 percent grain, 60 percent grain, or 40 percent grain.

Seedbox capacities
	Plain grain	Combination grain/fertilizer Three-position divider
	Plain grain	100 percent grain	60 percent grain	40 percent grain
Grain, L/m (bu/ft)	324 (2.8)	320 (2.76)	168 (1.82)	152 (1.35)
Fertilizer, kg/m (lb/ft)	---	---	168 (113)	226 (152)
Total, L/m (bu/ft)	324 (2.8)	320 (2.76)	3.4 (393)	3.4 (393)

The bulkheads in the seedbox reduce material shifting in the box for increased seeding efficiency.
A sight glass, located near the end of the box, allows the operator to view seed level at a glance.
Steel footboards with 25.4-mm (1-in.) diameter perforations allow convenient, safe access to the seed/fertilizer boxes.
In-line box design allows quick and easy filling.

A grass seeder attachment is available (see attachments in the Ag Sales Manual). The grass seeder attaches to the front of the seedbox and is commonly used for grasses and alfalfa.

Tank shield plates are available from Parts (see attachment for field conversion),

Protects box-end panels from damage
Ideal for operating in very irregular terrain, where box panels could contact each other

Front-folding frame allows for narrow transport

Narrow road transport

A fully hydraulic front fold/unfold system makes folding on the 455 Drills, for transport a true one-person operation.

Requires less than 5 minutes to fold or unfold
Transport width is narrow as 4.6 m (15 ft, 2 in.)

High opener transport clearance allows moving over ditches, railroad crossings, and other trouble spots without worry.

Opener to road clearance:

533.4-mm (21-in.) on 9.15-m (30-ft) and 10.7-m (35-ft) models
457.2-mm (18-in.) on 7.6-m (25-ft) model

Units are raised and lowered for transport with standard equipment-lift cylinders:

Two 76.2-mm x 203.2-mm (3-in. x 8-in.) cylinders on 7.6-m (25-ft) drill
Two 88.9-mm x 254-mm (3.5-in. x 10-in.) cylinders on 9.15-m (30-ft) and 10.7-m (35-ft) drills

There are four frame-mounted tires: 11L-15, 10 PR rib implement on all three drill sizes.

Warning lights are in base equipment for improved visibility when transporting.

Specifications

Compare the specifications of up to 4 models

Key Specs	455-front-folding-grain-drill Current Model
Plain grain - 25	70 bu
Plain grain - 30	84 bu
Plain grain - 35	98 bu
Grain/Fertilizer - 25	85
Grain/Fertilizer - 30	102
Grain/Fertilizer - 35	119
Spacing - 25	6, 7.5, 10 in.
Spacing - 30	6, 7.5 10 in.
Spacing - 35	6, 7.5, 10 in.
Dimensions
Transport Width	15, 2 ft, in. 15, 2 ft, in. 15, 2 in.
Transport Height	6, 11 ft, in. 6, 11 ft, in. 6, 11 ft, in.
Overall Length	22 ft 24, 6 ft, in. 27 ft
Weight
Clearance
Capacities
Plain Grain	70 bu 84 bu 98 bu
Grain/Fertilizer	85 bu 102 bu 119 bu
Meters
Type	Fluted-feed Fluted-feed Fluted-feed
Opener Assembly
Number of Openers	30, 40, 50 36, 48, 60 42, 56, 70
Spacing	6, 7.5, 10 in. 6, 7.5 10 in. 6, 7.5, 10 in.
Down Pressure	Active hydraulic Active hydraulic Active hydraulic
Disk	13.5 offset 0.25 in. 13.5 offset 0.25 in. 13.5 offset 0.25 in.
Gauge Wheels
Press Wheels	Standard 2 x 13 in. Standard 2 x 13 in. Standard 2 x 13 in.
Closing Wheels
Monitor
Type	SeedStar or ComputerTrak 250, 350, 450 SeedStar or ComputerTrak 250, 350, 450 SeedStar or ComputerTrak 250, 350, 450

Accessories and Attachments

Frame

Drawbar Hammer Strap Spacer Kit for 7000 Series Tractors - BN280616

Drawbar support

Drawbar support is required for 35-ft drills when using a 7800 Tractor.

Miscellaneous

Brackets - BN280002

Drive Parts - BN211174

Grass Seed Box - BN280416

Grass Seed Box - BN280420

Grass Seed Box - BN280531

Grass Seed Box - BN280533

Inserts - BN280429

Jackshaft - N218084

Mounting Bracket for 30, 40, 50, 55, and 60 Series Tractors for Control Console Only - BN280048

ComputerTrak 150 monitor

For installing 150, 250, 350, and 450 ComputerTrak monitors and front-fold control console with Deutsch connector or half-width disconnect control console on 1760 and 1770 12N Planters. Includes monitor mounting brackets, cab access, and rear connector mounts. Does not include radar equipment. Radar is required except when using the 150 monitor.

Mounting Brackets for 7000, 8000, and 9000 Series Tractors for Control Console Only - BN280236

ComputerTrak 150 monitor

Open Center Kit with Closed Center Change Valve - BN280593

The open-center hydraulic check valve is a pilot-operated check valve which traps oil to opener cylinders, maintaining preset position when tractor valve is neutralized. This check valve is required if drill is to be connected to tractors with open-center hydraulic system. It may also be used with closed center hydraulic systems. If the tractor valve is not neutralized on open-center tractors, damage to tractor will result (heat buildup in the hydraulic system). Kit includes: check valve, pilot line and necessary hydraulic fitting for installation.

NOTE: This should be ordered when drills are rented or leased.

Scrapers for Four Press Wheels - BA31814

Seed Tubes - BN280046

Select-Lift Kit for 30, 40, 50, 55 and 60 Series Row Crop Tractors - 25 Ft. Drills - BN907247

Select lift

The select lift kit allows an operator to selectively disengage a complete box and openers, and is ideal when drilling out point rows and headlands.

The control switch is located in the tractor cab, and there is a toggle switch for each box. One master switch is used to override or disengage system. Switches activate solenoids, which reverse oil flow, raising openers out of ground and disengaging clutches.

NOTES:

1. 4WD tractors require one R100373 adapter plate to mount the console and one AN280262 wiring harness to extend the console harness (Parts).

2. On tractors with a two-pin convenience electrical outlet, order one AA37254 (Parts) two-pin to three-pin adapter.

3. On tractors without a convenience electrical outlet, order one AE50549 and one AA37254 (Parts).

4. Compatible with closed-center or pressure-compensated hydraulics. Not compatible with open-center hydraulics.

Select-Lift Kit for all 7000 and 8000 Series Tractors - 25 Ft. Drills - BN907226

Select lift

The select lift kit allows an operator to selectively disengage a complete box and openers, and is ideal when drilling out point rows and headlands.

NOTES:

1. 4WD tractors require one R100373 adapter plate to mount the console and one AN280262 wiring harness to extend the console harness (Parts).

2. On tractors with a two-pin convenience electrical outlet, order one AA37254 (Parts) two-pin to three-pin adapter.

3. On tractors without a convenience electrical outlet, order one AE50549 and one AA37254 (Parts).

4. Compatible with closed-center or pressure-compensated hydraulics. Not compatible with open-center hydraulics.

Sensor Kit for ComputerTrak (4 Sensors) - BA31912

Monitor System

ComputerTrak 350 - 4 rows through 32 rows - BA31919

ComputerTrak 350

The ComputerTrak 350 monitors use electronic circuitry, radar distance measuring, and a large liquid crystal display to provide sophisticated monitoring with simple operation. Along with this, the ComputerTrak 350 can monitor up to 32 rows simultaneously.

The ComputerTrak 350 monitor solution is available as an optional feature for the following planter and drill models:

Drawn planters	Integral planters	Drills
1750 Planter Series	1700 Planter Series	455
1760 Planter Series	1710 Planter Series	1590
1760NT Planter Series	1720 8-Row and 12-Row Planters
1770 Planter Series	1730 Planter Series
1780 Planter Series

All other planter configurations will only have SeedStar™ 2 monitoring system available with no option for the ComputerTrak 350 monitoring system.

ComputerTrak 350 features include:

Liquid crystal display provides operator with information regarding the planter function
High/low warning alarm provides warning limits for seed population; this allows the operator to set the upper and lower population limits at which a warning is given
Monitors population by row scan, by individual row, or by the minimum/average/maximum features; the minimum/average/maximum feature alternately displays row number and data for the lowest and highest population and the average population
Displays seed spacing or population for all rows, showing the minimum/average/maximum for all rows
Radar distance measuring is base equipment; this can be field calibrated by the operator for improved accuracy
Ground speed of the planter can be displayed
Non-volatile memory allows the console to be disconnected from the battery and still retain the program
Built-in self-diagnostics check the continuity of all monitor sensor circuits upon power-up, providing up-and-ready display
Console is easy to program for special planting patterns such as skip rows, etc.
Monitor alarm can be turned off when multiple outside planting units indicate no seed flow, such as when using the half-width disconnect
Enables accumulating count of seeds planted by a single row for any distance
Allows measuring the total distance required to plant a desired quantity of seeds
A second acre counter, allowing two counters of area to be used
Split function allows two different planter configurations; this complements the 1790 for corn and soybean operations
Population adjustment allows a fudge factor to be used to adjust the displayed population for situations when the calculated population is not being correctly displayed

NOTE: ComputerTrak 350 monitors require a radar input. Radar is ordered separately from monitor.

In the event of a radar or radar input failure, the ComputerTrak 350 monitor has the capability to continue with the monitoring of seed flow. If a disk-failed message occurs on this monitor, a set speed, or known as speed-set mode, can be entered to allow continued operation until the radar or radar input error has been resolved.

When in speed-set mode, fast average, area, and speed readouts will not be available. Row-failed messages will occur when seed count drop below two seeds per second. High- and low-population warning messages are also deactivated in this mode.

Also while in speed-set mode, the monitor is going to show fluctuating populations because it assumes the machine is traveling at a constant speed, even though actual populations may remain accurate at slower and faster speeds. Displayed population will only be close to actual populations when actual ground speed matches set speed.

To enter speed-set mode, please follow the following steps:

Hold the split on/off switch while turning monitor on. A full display screen will be displayed for a few seconds and then the row-failed screen will display.
Release the split on/off switch and press the setup-select switch. The speed screen will be the first displayed. The speed will be displayed in the lower right-hand corner of the display.
Use the digit select and 0-9 switches to enter expected planting speed.
Press the scan switch to being monitoring of seed flow.

If power is lost to monitor for any reason, hold the split on/off switch for one second while powering monitor on to re-enter speed-set mode. Previously entered speed is stored in memory and will not have to be re-entered.

NOTE: The speed-set mode is deactivated each time monitor is powered off.